Ithaka official

[Idaholandho]

I believe the solution is in your post.



In my opinion ekowool has no enough absorbability, so when i used it I had either gurgling or dry taste

Great post Stelio. I love ekowool but, it is not for me on Ithaka or any of the GG's. 1.0, 1.2, 2.0, 2.5 all gurgle and the juice runs through especially on the first half of the tank.

 

[steliosss]

Onlyu 1 wick Dante and it works ok? No flooding ?

I don't think so.
I tried it once with pouthpiece and bf closed, but worked for 2 puffs
Probably he left it this way for a clearer photo

 

[Karabas.V]

Hi, Imeo! Hi, guys!

This topic has already appeared in the links to my reviews. Let me give them all in one place:

1. Ithaka from Golden Greek - a device for "smart vaping".

Ithaka from the Golden Greek. Design features principle. For an overview and a high-quality photo, high quality vaporizer.

The first part: http://truevaping.ru/ithaka-golden-greek-obzor-ustrojstva/
The second part: http://truevaping.ru/ithaka-golden-greek-obzor-ustrojstva_chast-2/

2. Ithaka Setup - smart setting for "smart" devices.

Setting GG Ithaka rebuildable atomizer. Wicks, spiral twisting, winding control. General information, options and recommendations. Full information on the Setup

http://truevaping.ru/ithaka-golden-greek-setup/

3. Simply the Best. Compare GG Ithaka other evaporators.

Compare GG Ithaka rebuildable atomizer with Kayfun v3.1 ES, Taifun GT, BY-ka XL. Peculiarities GG Ithaka, making this device the most structurally sound and viable evaporator

http://truevaping.ru/ithaka-golden-greek-compare/

4. Invasion of the Chinese bishops (clones). Copies of Ithaka RainbowHeaven and Tobeco.

Comparison of clones Ithaka rebuildable atomizer from Shenzhen RainbowHeaven Technology Co., Ltd. and Shenzhen Tobeco Technology Co., Ltd. The appearance, availability, appropriateness of purchase

http://truevaping.ru/ithaka-clones-rainbowheaven-tobeco/

All reviews / articles are written in Russian. Sorry, have read through the Google-translator .

Imeo, thank you for such a good product. It was pleasant to me. So much so that he wrote four great article about it (about one!!! Product). What never done before.

Sincerely,
Vladislav Karabas
truevaping.ru

 

[steliosss]

It's our honor to have you with us sir.
But we have to find a way to read your articles in English, because google translate is killing us

 

[Karabas.V]

Well, do not you think read Russian-language users read ECF? Me too brain break: )

 

[steliosss]

I know that sir
We'll keep reading you.. it's worth it

 

[DantesInferno]

Onlyu 1 wick Dante and it works ok? No flooding ?

Haha wondered and experienced this myself already. If I leave the top feed open and sit it aside it WILL flood. So I've been opening it to vape then close it back. Not a big deal, just have to remember to close it when I'm done vaping for a while. Hasn't flooded again, yet. Thinking maybe next try I'll use one long piece of silica, run it down to the oring and then back up the empty channel and snip it off flush at the ceramic.

 

[imeothanasis]

Thank you very much for your big effort and as I told you before, this was a titanic work. I am really impressed!!

Welcome to GG world. Have a nice staying buddy

Hi, Imeo! Hi, guys!

This topic has already appeared in the links to my reviews. Let me give them all in one place:

1. Ithaka from Golden Greek - a device for "smart vaping".

Ithaka from the Golden Greek. Design features principle. For an overview and a high-quality photo, high quality vaporizer.

The first part: Ithaka
The second part: Ithaka

2. Ithaka Setup - smart setting for "smart" devices.

Setting GG Ithaka rebuildable atomizer. Wicks, spiral twisting, winding control. General information, options and recommendations. Full information on the Setup

Ithaka Setup:

3. Simply the Best. Compare GG Ithaka other evaporators.

Compare GG Ithaka rebuildable atomizer with Kayfun v3.1 ES, Taifun GT, BY-ka XL. Peculiarities GG Ithaka, making this device the most structurally sound and viable evaporator

Ithaka

4. Invasion of the Chinese bishops (clones). Copies of Ithaka RainbowHeaven and Tobeco.

Comparison of clones Ithaka rebuildable atomizer from Shenzhen RainbowHeaven Technology Co., Ltd. and Shenzhen Tobeco Technology Co., Ltd. The appearance, availability, appropriateness of purchase

Копии Ithaka rebuildable atomizer от RainbowHeaven и Tobeco | TrueVaping.RU

All reviews / articles are written in Russian. Sorry, have read through the Google-translator .

Imeo, thank you for such a good product. It was pleasant to me. So much so that he wrote four great article about it (about one!!! Product). What never done before.

Sincerely,
Vladislav Karabas
truevaping.ru

 

[imeothanasis]

I see, nice trick Dante!

Haha wondered and experienced this myself already. If I leave the top feed open and sit it aside it WILL flood. So I've been opening it to vape then close it back. Not a big deal, just have to remember to close it when I'm done vaping for a while. Hasn't flooded again, yet. Thinking maybe next try I'll use one long piece of silica, run it down to the oring and then back up the empty channel and snip it off flush at the ceramic.

 

[foggdawg]

Well my TH and wicking issues are resolved. Thanks you guys for chiming in. Just found some 2mm silica lying around and wrapped 2 coils with it. .6ohms vapor heaven. Guess I can't use ekowool for everything. Oh, I did use a strip of ekowool for the middle crosspiece..lol. Great, now everythings back to normal...happy vaping

 

[imeothanasis]

just great fog.

 

[Shaketuga]

Is there any way I can get brass pieces for Ithaka?

 

[imeothanasis]

Ithaka doesnt have any brass pieces because all of its pieces come in contact with liquid Sha

 

[Aal_]

Guys are someone having good success with parallel coil? I mean in terms of air hitting the coils the right way. I think with the new nut, air is easier to hit parallel coils.

 

[Killjoy1]

I mostly do parallel coils. I tried the X setup once and it wasn't great, will try it again as that was probably my own fault, but so far I've stuck to parallel coils and had no issues. I haven't even used the new shorter nut, either

 

[imeothanasis]

yes its easier aal because air doesnt hit only in the middle where the coils are not in touch. Air comes from a lower point and the "cone" that produce, hits the coils in the right way

Guys are someone having good success with parallel coil? I mean in terms of air hitting the coils the right way. I think with the new nut, air is easier to hit parallel coils.

 

[subver]

Oh nice.. I will try parallel coils next time.. I've always done the X coils. This will be easier if I am doing microcoils on Ithaka! That's the main thing that's been stopping me because the way most people do it is they thread the cotton through the coil after heating the coil up a few times and pinching the coils together so it forms more of a tube shape. I could never do that if they were in an X.

 

[steliosss]

I mostly do parallel, but i let them touch each other so the air comes from the side.
I stoped the X ones because i had some issues with short-circuit when i had to entirely close the mouthpiece.
Of course i could push the X ones with my finger in to the rebuildable, but anyway... i love the parallels too

 

[Idaholandho]

Oh nice.. I will try parallel coils next time.. I've always done the X coils. This will be easier if I am doing microcoils on Ithaka! That's the main thing that's been stopping me because the way most people do it is they thread the cotton through the coil after heating the coil up a few times and pinching the coils together so it forms more of a tube shape. I could never do that if they were in an X.

As I have mentioned, I find the way Scott adds another small piece of silica wick along with his longer wick when building parallel coils really works for me when Im not trying to copy Bishop!

REVIEW OF THE ODYSSEUS REPAIRABLE ATOMISER - YouTube around 11:58

 

[Shaketuga]

Mmm indeed

Ithaka doesnt have any brass pieces because all of its pieces come in contact with liquid Sha