Ithaka official

[imeothanasis]

of course I dont see ANY reason to make a dripper in the ages of tankomizers like Ithaka is, but anyway, lets improve what exists in the market

 

[rogue007]

of course I dont see ANY reason to make a dripper in the ages of tankomizers like Ithaka is, but anyway, lets improve what exists in the market

Imeo, I love drippers... Mostly due to tanks having to be drained if the coil build goes bad after filling the tank with eliquid. You don't know how many times I made coils of the ithaka and tested it while I dripped some juice of the wicks and it worked fine, then I thought it was ok, then filled the tank to find out it wasn't wicking right... I know that is my fault but still, in vaping, drippers have their place and still Imeo once you have put your genius mind on one it will be something that many will try to copy.

I feel that once you start, it's something that maybe you can re-invent....

Also, there's nothing wrong with GGTS button, so my vote goes with making the new dripping body for the new Ithaka insert.

 

[justinred]

Imeo, I love drippers... Mostly due to tanks having to be drained if the coil build goes bad after filling the tank with eliquid. You don't know how many times I made coils of the ithaka and tested it while I dripped some juice of the wicks and it worked fine, then I thought it was ok, then filled the tank to find out it wasn't wicking right.

Nifty trick for ody/peny/ithaka so that you don't need to drain eliquid is to remove rebuildable base while atty is upside down.

 

[dspin]

Plenty of folks out there who love the Kayfuns, but I sold/traded mine because they were too temperamental for me. If I didn't do the build just right, if the wick was 1mm too high or too low, I got either leaking or dry hits. I gave them a few months, dozens and dozens of builds in 3.1 and Light, and finally gave up. My 2 Ithakas are much more forgiving, I really have to screw up a build to make it break, and I know I've done something wrong long before I assemble and fill - so, never happens.

Thank's Kataphraktos for the input. As I said I do like trying new stuff but on the other hand I don't like having to choose between 2 different things for main use. If I were to like the Kayfun it would actually annoy me to have to choose between it or an Ithaka.

In the end I'll probably just go for the Ithaka update but I still thought I'd post my thoughts on the issue regardless.

There are much better drip tanks out there IMO then Kayfun - that do not require draining tanks nor do they leak.

 

[Gobra]

Wonderful Clone of "Vochu".

The first GG Clone by GG.

Normally a Clone is cheaper than the original... This isnt here..

Anyway I thank to..i have a little fun

 

[Gobra]

I didnt know that new GG rebuildable part was a copy of this construction abram

I made Odysseus and Ithaka in a way that we could put in future anything new on its base like this upgrade abram. And I did it.

I also put coil on bottom of my atomizer (Odysseus). And I made channels on my first rebuildable part (Odysseus) to let liquid travel to the coil. I also made a mouthpiece that screws on this rebuildable part (Odysseus). Kayfun copied almost all the parts and all the thought behind this project and now I am the copier? Am I a copier of my own designs? Are you sure that you are talking to the right person?

Also, do you see any similarity on how I made my new rebuildable part with this "Vochu" thing?

And, do you see any liquid control on this "Vochu" or any way to move poles in any direction? The only similarity is that it has 2 bolts to catch wires. Maybe next time I have to use my wife's hairpins?

Imeo not start the engines at maximum ,I we should go make savings
!! lol

Jgg ,Ithaka,Ithaka-upgrade,PenelopeV2,Dripper,Proteus lol
gg horizon is promising lol
ohhhh our pockets !! lol

ps.I already bought separately Ithaka ggts base is on the way for upgrades lol

 

[dspin]

[double post

 

[dspin]

Of course I have more ideas than a dripper, like making Ithaka much shorter but at the same time let it take more liquid inside. Also, making a new GGTS button etc.

A NEW GGTS Button???? hope that doesnt mean replace the previous ones.

I am glad I am a GGTS button hoarder - I cannot imagine a better adjustable button then the classic ones of 2010 or even the JGG button which actually is quite nice.

 

[Gobra]

for dripper ,I wish separate option ,adapter for ego drip tip (type-b)

 

[Gobra]

I believe the new button ggts is preparing for electronics ..

 

[dspin]

I believe the new button ggts is preparing for electronics ..

Oh ok G - I am not concerned about it then.

 

[Gobra]

Mouhtpiece is not telescopic rog.

But I must say that I am on my third coil and this method works like a charm until now. Its so airy, like a hookah. No leakage at all. 3 holes of 2mm each bring air on coil, so 6mm holes in total. Its a heaven for direct inhalers. I dont think that something like this has been done before

I made ​​another experience after I saw this post ,,hookthaka,,



1-remove ithaka center post
2-screwed in place without center post
and to figure out what I'm talking

can you do surprise us with a new adapter,and as for the existing holes

 

[imeothanasis]

rog, If you agree, Ithaka can do everything, that means that it works like a dripper too. That way you can test your coils. Also, if you want to test them more, just put a very small amount of liquid and test it again.
Maybe I miss something here? I am just asking

Imeo, I love drippers... Mostly due to tanks having to be drained if the coil build goes bad after filling the tank with eliquid. You don't know how many times I made coils of the ithaka and tested it while I dripped some juice of the wicks and it worked fine, then I thought it was ok, then filled the tank to find out it wasn't wicking right... I know that is my fault but still, in vaping, drippers have their place and still Imeo once you have put your genius mind on one it will be something that many will try to copy.

I feel that once you start, it's something that maybe you can re-invent....

Also, there's nothing wrong with GGTS button, so my vote goes with making the new dripping body for the new Ithaka insert.

 

[imeothanasis]

I believe the new button ggts is preparing for electronics ..

not at all cobra, its just a totally new design with a new loick style. Its a whole contsruction. We have to replace everything after telescope

 

[xtreme101]

When do we get sneak peek at the new designed button?

 

[imeothanasis]

I was ready to make it when my electronic engineer told me yesterday that tests of Proteus are finished, so now I have to make the right tubes for it xtreme.

 

[imeothanasis]

.....................

 

[xtreme101]

I was ready to make it when my electronic engineer told me yesterday that tests of Proteus are finished, so now I have to make the right tubes for it xtreme.

You mean the right tubes for Proteus?
The new designed button will fit our current GGTS ~ JustGG tubes?

 

[Gobra]

not at all cobra, its just a totally new design with a new loick style. Its a whole contsruction. We have to replace everything after telescope

for me is ok and so !
the rest deal with dspin lol

 

[Gobra]

I believe the new button ggts is preparing for electronics ..

I withdraw what
Sorry dspin