My Ithaka will be here Thur It looks like any gripes any body has about any atty have been addressed in this one. The only thing missing is the Magic juice well that never runs dry! ;-).
Ithaka official
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
-
- Tags
- provari
- Status
My DIY Ry4 is the only juice I use and have used. Even when I use it in carto tanks, they gunk up really quick and I have to change my cartos every other day. I was wondering if there are any other RY4 flavor concentrates from other vendors other than wizardlabs, that might be better...
Drove 12 hours yesterday and came home to It haka waiting for me in the mail! Bruce included about 12in of what looks like 2.5mm wick and a ready wire. Awesome! This saved me a few minutes after a long day. Thanks COV team for getting this to me pretty much ready to vape! Imeo, you are gifted my friend. First time setup and it vapes like a champ. It sounds like a jet engine everytime i fire it up. 1.7ohm coil at 3.7v feels like vaping at 16 watts on any of my other atties. Amazing performance and easy to get running! Now I just need to dial in my setup. Needless to say, Ithaka #3075 will never leave my sight! Thanks again Imeo for a fantastic product!
Hello everyone... is anyone having issues trying to remove the top cap without also turning the mouthpiece for drip tips? I believe its because of the o-ring tightness. Does anyone have suggestions besides getting a thinner O-Ring? My Penelope top cap comes off so much easier without it turning the mouthpiece. I cant seem to get the mouthpiece to stay in one place when removing the top cap. I know... its a first world problem. 
Actually I had the same problem. Imeo said to hold the mouth piece in place and use the indentations on the top cap to unscrew the little cap and now it works great.
Hello everyone... is anyone having issues trying to remove the top cap without also turning the mouthpiece for drip tips? I believe its because of the o-ring tightness. Does anyone have suggestions besides getting a thinner O-Ring? My Penelope top cap comes off so much easier without it turning the mouthpiece. I cant seem to get the mouthpiece to stay in one place when removing the top cap. I know... its a first world problem.
From my reading of this post, the Ithaka is worth the $$$?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Hello everyone... is anyone having issues trying to remove the top cap without also turning the mouthpiece for drip tips? I believe its because of the o-ring tightness. Does anyone have suggestions besides getting a thinner O-Ring? My Penelope top cap comes off so much easier without it turning the mouthpiece. I cant seem to get the mouthpiece to stay in one place when removing the top cap. I know... its a first world problem.
Just remove the o-ring and lubricate it with whatever juice you are using.
thanks a lot blix, happy vapingg buddy
Got my Ithaka in my hands, and what a beautifully engineered pice of work! Now to figure out how to set up this thing....
Hello everyone... is anyone having issues trying to remove the top cap without also turning the mouthpiece for drip tips? I believe its because of the o-ring tightness. Does anyone have suggestions besides getting a thinner O-Ring? My Penelope top cap comes off so much easier without it turning the mouthpiece. I cant seem to get the mouthpiece to stay in one place when removing the top cap. I know... its a first world problem.
Michael, my Ithaka doesnt do that, except I unscrew the big cap while the small cap is still in place. So if unscrewing your small cap the mouthpiece gets unscrewed too then please keep your mouthpiece screwed a very little harder on rebuildable part
I didnt say that grab. Maybe you thought I told you this via pm? It must be a misunderstooding between us
You are right, you said big cap, I just checked.
I didnt say that grab. Maybe you thought I told you this via pm? It must be a misunderstooding between us
Okay, color me impressed. As this is my first go at anything GG, I tried it simple and set up the Ithaka at 1.7 ohms with a single coil using the supplied wire. This isn't the simplest atomiser to set up , but man it hit's hard! Even at 1.7ohms single-coil it pretty much blew my mind. The self-centering (or what I can call it) centre pin is genius.
Finally got my Ithaka - Thanks Imeo!
I'm gonna be honest with you guys, I still haven't even set it up! I need to take some time to sit down and watch the videos again (I watched them before it came out)
I know Bishop said he was gonna make a video.. did he do a simple Ithaka setup video yet? I'd love to set this bad boy up tonight!
Also.. I got #3329... SO CLOSE! "My number" is 333, so one number higher I would've had 3330! Ah well
It looks beautiful Imeo, can't wait to vape it!
I will probably just set it up and try to just remember everything I've watched haha, not sure if that's a bad idea or not
I'm gonna be honest with you guys, I still haven't even set it up! I need to take some time to sit down and watch the videos again (I watched them before it came out)
I know Bishop said he was gonna make a video.. did he do a simple Ithaka setup video yet? I'd love to set this bad boy up tonight!
Also.. I got #3329... SO CLOSE! "My number" is 333, so one number higher I would've had 3330! Ah well
It looks beautiful Imeo, can't wait to vape it!
I will probably just set it up and try to just remember everything I've watched haha, not sure if that's a bad idea or not
Last edited:
Thanks again Blix my friend
One question only. I really think that its the simplest and easiest single or dual coil atomizer that ever made. Is there something easier in the market that doesnt need any tools to make it work? As you know I dont really know what exists in the market but friends around tell me that all the rest of atomizers have a difficulty to make a coil on them, or they need tools or the user need glasses to see what is going on in them.
One question only. I really think that its the simplest and easiest single or dual coil atomizer that ever made. Is there something easier in the market that doesnt need any tools to make it work? As you know I dont really know what exists in the market but friends around tell me that all the rest of atomizers have a difficulty to make a coil on them, or they need tools or the user need glasses to see what is going on in them.
Finally got my Ithaka - Thanks Imeo!
I'm gonna be honest with you guys, I still haven't even set it up! I need to take some time to sit down and watch the videos again (I watched them before it came out)
I know Bishop said he was gonna make a video.. did he do a simple Ithaka setup video yet? I'd love to set this bad boy up tonight!
Also.. I got #3329... SO CLOSE! "My number" is 333, so one number higher I would've had 3330! Ah well
It looks beautiful Imeo, can't wait to vape it!
Glad to hear that you received it sub. Put it on work and post again
grab helped me on that by sending me the pluid, so there is no need for you to make the test and stay without your Ithaka Ry
Thanks for the update Imeo
Put 6 volts on your GGTS Ali and you will have again what you need. Then after 1/2 hours and if hit is very big, put again 3,7 volts. That way your coil will be cleaned without a dry burn and you will not stop using Ithaka at all
- Status
Similar threads
