Ithaka official

[Darkreign]

Add two more upper body parts to the one you already have for a total of three upper body parts. You have to leave off the engraved ring.

That's what I am trying to avoid. I have a working Ithaka now with my current tank setup, I was just really hoping to be able to sport my Wings!

If I can track down either an Ithaka window or an Oddyseus Upgrade window I can make it work.

 

[RiverNut]

Hi Imeo. Just found a huge fix:
When a little amount of liquid gets into the center air hole, even with the central pin shortened, the liquid goes down the center air hole, and ends up on the positive pole of the electronic cigarette( in my case, my provari ). Now when you want to inhale, air has difficulty passing, because that drop of eliquid gets in the way, and it makes a noise as well. So I made that little cut on the buttom of the brass pin(the one that comes in contact with the provari positive pole) about 2 milimeters deeper, and now airflow is much much much better, with NO sound, and a much better vapor production.

maybe I'm confused as to which part you mean but my brass pin already has a cut in it.

 

[Poppa D]

I think he's saying make that cut deeper, he's suggesting 2mm. By doing this the air inlet is raised higher, which allows his Ithaka to continued to work with a small puddle of juice around the connector pin.
I did this with my Odys & my Ithaka a while back and it does work.

 

[RiverNut]

Yeah I guess it would especially be helpful when using it on a mod that doesn't have the cutout on the positive pole like Provari.
I'll have to try it with my Ody, the stiff draw was the only thing I didn't like about it.

 

[Lentulusbatiatus]

Have Ithaka's been shipped already to E-Smoke ? or are they the same as COV and shipped in a couple of days ?

 

[blackwater]

Yeah I guess it would especially be helpful when using it on a mod that doesn't have the cutout on the positive pole like Provari.
I'll have to try it with my Ody, the stiff draw was the only thing I didn't like about it.

Hi,
How are you guys cutting this slot? What method are you using to make it bigger?

Thanks

 

[subver]

I haven't done it, but I imagine a little cutting wheel on a dremel would do the job nicely!

 

[Poppa D]

I haven't done it, but I imagine a little cutting wheel on a dremel would do the job nicely!

That's what I used to cut mine.

 

[imeothanasis]

I dont really see any great benefit Black. Maybe only the fact that you can have a thin atomizer that goes everywhere and a tank that works with every China atomizer. But this combination will not beat Ithaka for sure

Quick Question Imeo.

Now that I have the best of the best with Ithaka and my penelope awaiting her proteus,
What would be the benefit of owning a UFS with an Achiles? I will buy them anyway but just curious as to the benefits if any over the Ithaka.

Thanks,

Chris

 

[imeothanasis]

I thought that you need an Odysseus body Dark. Maybe I read wrong?

Actually, the Ithaka's upper body part has male + female threading. In order to use the SN ring I would need something with male + male threading so an extra upper body part wouldn't work.

I placed the order with GG UK, I am not sure if they were out of stock and accidentally kept it on their site, or if they just had extra left over. Hopefully I will find out soon either way.

 

[imeothanasis]

vasilis will have them sooner Mono. I believe that on Monday or Tuesday he will start shippping

Imeo, is this the same for Vasillis ? I mailed him yesterday as I have to go away with work on 10th July and I cannot get my housesitter to sign for parcel at post office

 

[imeothanasis]

I am a little confused now Dark. Can you tell me again what exactly you want to do so I can maybe give you a solution?

That's what I am trying to avoid. I have a working Ithaka now with my current tank setup, I was just really hoping to be able to sport my Wings!

If I can track down either an Ithaka window or an Oddyseus Upgrade window I can make it work.

 

[imeothanasis]

I will ship them tomorrow due a small issue with ceramics Mev

Have Ithaka's been shipped already to E-Smoke ? or are they the same as COV and shipped in a couple of days ?

 

[fright88]

I am a little confused now Dark. Can you tell me again what exactly you want to do so I can maybe give you a solution?

He is saying he doesn't want to use 3 top tubes because then he couldn't have the engravings on it. So he would like a solution that keeps the engraved tube. Which means a ss ithaka window.

 

[imeothanasis]

I didnt understand what Dark wants in first place fright.

 

[Darkreign]

I didnt understand what Dark wants in first place fright.

Imeo, the clear window in my Ithaka is unusable and i dont have a steel window to replace it with. I just purchased it through the classifieds, so I missed out on the pre-orders. i would very much like to have an "Original" Ithaka, with the engraved ring and poly window so that I can display it properly.

So, I am looking for either a clear Ithaka window, or the window from the Oddyseus "upgrade" that had the male threading on both ends.

As far as solutions to get it working, thank you all for everything, they are great solutions. My Ithaka is working in its current configuration.

Thanks again,

James

 

[subver]

Darkreign CoV should have some extra steel replacement windows in stock soon.. I know I'm waiting for one as well.

 

[Darkreign]

Thanks Subver, I keep stalking their site in the hopes I can get one.

 

[dwcraig1]

Isn't COV getting clear windows in at the same time as the steel ones?

 

[Darkreign]

If they are, they dont have them listed on their site. But i will keep a lookout, just in case.