Using a PV and a PT, I will rmb what you said and try it out soon. = D
Journey of vaping.
- Thread starter Firevampire
- Start date
- th_trl_thread_readers 0
- Status
Using a PV and a PT, I will rmb what you said and try it out soon. = D
Had some problem with my PV cause it will auto on even so I switch it off.
Did some research and I just pull my bottom cap spring slightly up, now the problem seem to be solve even I try shake it hardly. Hahaha = D
Did some research and I just pull my bottom cap spring slightly up, now the problem seem to be solve even I try shake it hardly. Hahaha = D
Might be problems from the chip or connections better be safe
Sent from Gotham City using Tapatalk
Just got my Stardusk v3, but either no taste (below 4.4v) or burn plastic taste (4.7v ~ 4.4v). sian..
fill up 0.9ml of Caramel Cappuccino (just above the wick inlet into the coil head) with soaking for a few hours.
now researching on dry burning & the silica etc..
Going back to my CE4, great taste at 4.4v. (used for 2 weeks liao).
However good taste when it is fill near the coil head inlet, when juice goes down, so is the taste. swirling sometimes doesnt help also.
Qn. Have anyone ever tried knocking out the center piece out of the tank to replace the coil head? Saw it on the tube but concerned whether it will leak after doing that.
No lobang for bottom coil yet.. haiz..
fill up 0.9ml of Caramel Cappuccino (just above the wick inlet into the coil head) with soaking for a few hours.
now researching on dry burning & the silica etc..
Going back to my CE4, great taste at 4.4v. (used for 2 weeks liao).
However good taste when it is fill near the coil head inlet, when juice goes down, so is the taste. swirling sometimes doesnt help also.
Qn. Have anyone ever tried knocking out the center piece out of the tank to replace the coil head? Saw it on the tube but concerned whether it will leak after doing that.
No lobang for bottom coil yet.. haiz..
Went to check, it just my bottom spring getting loosen that why.
thanks for caring tho. =D
good afternoon guys
been reading this thread but hesistated to post cos im afraid to sound noob
decided to cos wat the heck anyway, good mood today (cos yesterday won some moolah from singpools)
Im using 2 attys now, KFL and KFL+ with nemesis
Regarding rebuilding, this is my experience after using 28 and 30 kanthal wires and silica wick
30awg
5-4 coil single wick, 1.3-1.5 ohm
4-3 coil single wick, 1.0-1.3 ohm (fantastic TH and taste)
friend recommended me trying figure-8 wick to minimise dry hits i get sometimes
30awg
5-4 coil figure-8, 2.3-2.6 ohm (totally no taste on my 6mg juice)
4-3 coil figure-8, 1.6-1.8 ohm (arghhhhh)
28awg
4-3 coil figure-8, 1.1-1.4 ohm (good to vape now!!!)
now, am experimenting with DIY juices
been reading this thread but hesistated to post cos im afraid to sound noob
decided to cos wat the heck anyway, good mood today (cos yesterday won some moolah from singpools)
Im using 2 attys now, KFL and KFL+ with nemesis
Regarding rebuilding, this is my experience after using 28 and 30 kanthal wires and silica wick
30awg
5-4 coil single wick, 1.3-1.5 ohm
4-3 coil single wick, 1.0-1.3 ohm (fantastic TH and taste)
friend recommended me trying figure-8 wick to minimise dry hits i get sometimes
30awg
5-4 coil figure-8, 2.3-2.6 ohm (totally no taste on my 6mg juice)
4-3 coil figure-8, 1.6-1.8 ohm (arghhhhh)
28awg
4-3 coil figure-8, 1.1-1.4 ohm (good to vape now!!!)
now, am experimenting with DIY juices
No 1 is a noob here, we are get our start in some way, anw u do sound like you know what you are doing so keep it up!!
aiyoh, starting kenna suan left right up down by 'expert' vaping friends, u dunno only
im now trying to figure out how to top up my kfl when im using the metal tank (cos im trying some crack tank juice)
how do experts know when the tank is top up???
any tips???
when topping up the juice on a kfl
if i use the plastic clear tank, can tell when the tank is filled
but now using the metal tank, dunno how much of the tank is filled mah
If I'm not wrong your kfl got a center tube right?
If yes, you should not fill your juice over the center tube hole.
I'm using a PT so i fill it up to around the center tube hole but not so full cause it may screw up my tank. Half or lower at home.
Beautiful! I want...
Bro, u very poisonous leh, now i need to get a tube mod liao. LOL
dun like that say me leh, im not poisonous at all compared to my other friends.
i only got 2 nemmy and 2 kfl....
For those of you who bottom filll using the fill port.. Might i suggest a syringe with an 18G needle? Measure ~4.5 ml of your liquid and pump it inthats how i usually fill mine.. No problems so far
wah, thanks a lot... now i know
One of the best,you should try it, I think you will give up most tanks
Unless you are alternating usage
Sent from Gotham City using Tapatalk
- Status
