JOYETECH ERoll

Status
Not open for further replies.

DawnBella

Super Member
ECF Veteran
Jul 22, 2011
841
443
USA
I don't their mixing as they do not advertise it but I use HALO and Dekang mainly. PG 18mg or 24mg. The very same liquids are smooth when using a cart or direct drip on a 306 atty. It must have something to do with the tank system. Had the same issue with the 510-T. Its not as bad with the eRoll but still a tad harsh. I think it has something to do with how hot the attys get (so hot you cannot hold via the cone.)
 
Last edited:

jingai

Senior Member
ECF Veteran
Verified Member
Apr 1, 2009
257
160
Florida, USA
I don't their mixing as they do not advertise it but I use HALO and Dekang mainly. PG 18mg or 24mg. I think it has something to do with how how the attys get (so hot you cannot hold via the cone.)

I don't mean to belabor the point, but I do believe the eRoll is intended for higher-nic liquids and thus, less frequent usage. My cone doesn't get too hot to hold simply because I don't draw on it enough to let it get so.

IMHO, this is what makes the eRoll work.

edit: In other words, smoke it like an NJOY King. Use 30 or 45mg liquids.
 
Last edited:

-iD

Senior Member
ECF Veteran
Verified Member
Nov 12, 2010
193
80
Midwest US
one day I dropped my twist and the button got stuck and wouldn't fire at all. Tried to fix it and the button came off of the circuit board totally. Then the next day, dropped the spinner and it broke in the same way. That one worked for the next day if I pushed the button just so, but then stopped responding totally. I don't blame the batteries, as I dropped them both many times. They must have just hit the ground in a certain way that made them break. Definitely a couple rough days haha.

Usually easy to fix. The button is not attached, it just sits in the right place unless it is moved by an impact like dropping.

If you carefully pry the cap off of the battery you end up with the cap (with the button hole) in one hand and the battery (with the circuit board sticking straight up) in the other, and the button probably on the floor in front of you. Find it, lol. Then hold the cap sideways with the hole facing down, put the button back in place inside it, and slide the bottom part into l place. It's awkward to do but once you see it you'll get it. I had one that came loose and got stuck regularly, I got quite good at fixing the button.

tap'd on my Google Galaxy Nexus
 

Bookworm

Vaping Master
ECF Veteran
Verified Member
Jul 16, 2012
3,862
3,611
USA
Usually easy to fix. The button is not attached, it just sits in the right place unless it is moved by an impact like dropping.

If you carefully pry the cap off of the battery you end up with the cap (with the button hole) in one hand and the battery (with the circuit board sticking straight up) in the other, and the button probably on the floor in front of you. Find it, lol. Then hold the cap sideways with the hole facing down, put the button back in place inside it, and slide the bottom part into l place. It's awkward to do but once you see it you'll get it. I had one that came loose and got stuck regularly, I got quite good at fixing the button.

tap'd on my Google Galaxy Nexus

I tried with the twist and a wire snapped as soon as I got the cap off. I've been too scared to try with the Spinner. Messing around with electronics has never really been a skill of mine haha.
 

peraspera

Ultra Member
ECF Veteran
Verified Member
Sep 2, 2012
2,808
6,184
midwest
No matter the liquid or newness of the atty, the eRoll (just like the 510T) is a bit harsh of a vape. Maybe it's just me. ??

I've never gotten any harshness from my eRoll with delicate flavors through bold one. However, I thoroughly clean my atties and dry burn before using new ones. Manufacturing Residue du Jour is right at the top of my evil juice list.
 

DawnBella

Super Member
ECF Veteran
Jul 22, 2011
841
443
USA
Just saying, the Kings are 30mg minimum. For me, that actually made all the difference with the eRoll.

Don't vape it -- smoke it.

I'm aware and I agree but the liquid used in the NJOY KING is not only not available but lacks the nasty alcohol buzz kick found in so many liquids. It is much smother. 30-45mg of other liquids on the market is way too much for me and I've tried.
 
Last edited:

DawnBella

Super Member
ECF Veteran
Jul 22, 2011
841
443
USA
I've never gotten any harshness from my eRoll with delicate flavors through bold one. However, I thoroughly clean my atties and dry burn before using new ones. Manufacturing Residue du Jour is right at the top of my evil juice list.

My atty is 7 hours old ;-) I bought 20 new ones. lol. Like I said, it's not as bad as a 510-T was but it is still a tad harsh to me. So be it I guess LOL
 

volume control

Ultra Member
ECF Veteran
Verified Member
Nov 2, 2012
2,011
1,348
Mass
Just said I was gonna use more VG this time around. The cost to ship them, you could just buy new ones silly.



No it wouldnt, you could throw them in an envelope with an extra stamp lol. I bet its under a buck. Tell you what, ill give you a buck a piece, and it will cover shipping
 

volume control

Ultra Member
ECF Veteran
Verified Member
Nov 2, 2012
2,011
1,348
Mass
I got my hangsen liquids from caterpillar vapes, strongest at 24mg. 4 10ml bottles with shipping for like 13 bucks! They are plastic needle tip, the smallest tip ive ever seen, and fill the eroll no problem. Ive only smelled them since i dont need to fill anything atm but the USA mix smells really tasty!

If you dont want to get a ucan, or are sick of leaky ucans, you can buy a bottle of this and reuse it, they are really nice little bottles
 
Status
Not open for further replies.

Users who are viewing this thread