Yeah, probably. But I'm the person who tosses atomizers as soon as they start to taste funky (2-3 days), so I probably won't ever experience this lol.
- Status
Yeah, probably. But I'm the person who tosses atomizers as soon as they start to taste funky (2-3 days), so I probably won't ever experience this lol.
Happened to a friend the other day. I was like what are you doing taking it apart with the cart still on! I had a good laugh, mainly because i just gave him the atty.
June I am wondering if you have a wonky battery. Do you have access to a multimeter? Maybe the voltage is staying higher for a few pulls, then dropping drastically. If you can test the voltage fresh off charge and then test it after you do those few pulls. I think a few pages back, someone ran into a spell of a few bad batteries.
Sent from my iPad using Tapatalk HD
Sent from my iPad using Tapatalk HD
I think it sounds like it isn't feeding as fast as she is vaping. I have had to stick a needle in the wick and wiggle it a little on a couple of mine. I use straight PG or 80/20. They just seem to get gunked up after awhile.
The too thin liquid is making the most sense so far. I'll try to find the multimeter when it's light tomorrow. It seems to hit smoother if i lay it down for a while - whether or not i lay it down in the PCC. I'm using 70 VG 30 DW from Mt Baker. This one has 3 extra flavor shots tho.
Out of 4 batteries so far Ive had one that doesnt work right. You have to suck really hard to get it to work. At times it will work briefly but then it goes back to crap. If you hold your hand at the end so that you can see the light come on I could actually see the light fade and come back again. If it does this at all you get almost no vapor. Once I grabbed another battery and switched the exact same atty, cone and tank to the new one it was working perfectly and I knew it was the battery. Perhaps this is your issue, but perhaps it isnt. If you have a second battery you should switch everything over exactly the way it is on the first one and see what happens.
The liquid is far from thin. I use it daily in my eRoll with no problems.
Hi!
I've been using eRoll for a couple days and i have a problem, wondering if u could help me out:
I use VG juices. So i changed wick to the roll of mesh, oxidized the end that comes to the coil and it wicks perfect. The problem is that sometimes it just keeps firing, especially after longer drags. I didn't notice this with original silica wicks, so i think this has something to do with mesh wick. Any ideas?
Thanks in advance
I've been using eRoll for a couple days and i have a problem, wondering if u could help me out:
I use VG juices. So i changed wick to the roll of mesh, oxidized the end that comes to the coil and it wicks perfect. The problem is that sometimes it just keeps firing, especially after longer drags. I didn't notice this with original silica wicks, so i think this has something to do with mesh wick. Any ideas?
Thanks in advance
I haven't tried with a pure vg,Hi!
I've been using eRoll for a couple days and i have a problem, wondering if u could help me out:
I use VG juices. So i changed wick to the roll of mesh, oxidized the end that comes to the coil and it wicks perfect. The problem is that sometimes it just keeps firing, especially after longer drags. I didn't notice this with original silica wicks, so i think this has something to do with mesh wick. Any ideas?
Thanks in advance
but if that firing has something to do with too low resistance, what I have measured, oxidizes the head of the wick doesn't help anything. If is it unused clean coil and the head of the wick is sharp, that can cause a little short circuit.
Maybe you can try to change the position of the wick a little bit. or just wait for the coil gets a bit of soot on it before try with ss wick. Että tällaista neuvoa.
Tapo:8664288 said:Hi!
I've been using eRoll for a couple days and i have a problem, wondering if u could help me out:
I use VG juices. So i changed wick to the roll of mesh, oxidized the end that comes to the coil and it wicks perfect. The problem is that sometimes it just keeps firing, especially after longer drags. I didn't notice this with original silica wicks, so i think this has something to do with mesh wick. Any ideas?
Thanks in advance
Good idea with the mesh! Thats not the problem though, ive seen that happen a few times on older batteries. The auto batteries have a sensor switch that just wears out. I'm going to try to clean one sometime, maybe suck pga through the airhole to see if the switch is gunked up.
I haven't tried with a pure vg,
but if that firing has something to do with too low resistance, what I have measured, oxidizes the head of the wick doesn't help anything. If is it unused clean coil and the head of the wick is sharp, that can cause a little short circuit.
Maybe you can try to change the position of the wick a little bit. or just wait for the coil gets a bit of soot on it before try with ss wick. Että tällaista neuvoa.
Hahah, kiitos
Now when you mentioned the low resistance, i just started to think that what if this has something to do with lr atties i use? Because that issue started at the same time when i started to use lr atties.. Maybe i'll try the ss wick with nr atty and see if it helps
Hahah, kiitos
Now when you mentioned the low resistance, i just started to think that what if this has something to do with lr atties i use? Because that issue started at the same time when i started to use lr atties.. Maybe i'll try the ss wick with nr atty and see if it helps
I believe the output on the battery is overload regulated, and will not supply any additional wattage to an LR atty, so there is no point in using one. No one has tested the current to confirm this, but many of us have tried an LR atty and noticed no difference in performance
Yah we care!
Same. I did some Bobas Bounty ( 100 VG ) this morning and was getting dry hits if I took too long pulls.
Sent from my iPad using Tapatalk HD
You can refill the tank with a needle tipped bottle much quicker than swapping tanks and dealing with caps.
Can you refill without pulling the cart off? Or do you have to fill through the bottom as I have been doing?
If through the bottom, just pulling one cart and replacing with the other is more convenient in my mind but not matter what, the small carts with no storage are the weakest points of the unit.
I pull the tank off, fill it and pop it back on. I tried prefilled tanks in a pillbox. The caps leak a little and I get juice all over my fingers removing the caps. I'd rather fill than replace, just works better for me. Also I run 40mg juice in it so I don't go through nearly as much juice as I normally would.
- Status
Similar threads
