For you people that want to put a gold band 801 on your polished GG with 801 adapter and do a photo shoot with leggy blondes.
Just a heads up, JantyUSA is back and has the titanium tawa's again
- Thread starter Zofryer
- Start date
- th_trl_thread_readers 0
- Status
Gorgeous! I only have black ones right now
I don't think I have tried the Janty atomisers on the GG yet apart from a dying one they are rubbish in my stick (light draw) but yet they draw just fine on GG and original KISSbox maybe I should get erm out!
I don't think I have tried the Janty atomisers on the GG yet apart from a dying one they are rubbish in my stick (light draw) but yet they draw just fine on GG and original KISSbox maybe I should get erm out!
I prefer the BE112's for carts and the TAWA's for dripping. Here is an *AWESOME* tip though.
The metal on the band on the bottom of the silver BE112's IS brass. it's just chromed. If you are very careful, you can sand off the chrome then polish it.
The metal on the band on the bottom of the silver BE112's IS brass. it's just chromed. If you are very careful, you can sand off the chrome then polish it.
I use the BE112's as well as the Janty Titaniums in the JS, they slide in easily. Will try sanding one down Zof, that could look good with the GG brass end caps.. good tip, thanks
Here's a couple of pic's of my GGT with a rubbed down 801 before and after. I think it makes a world of difference.
I use 120 and 160 grit sand paper to remove the paint, then some 400 grit to remove the scratches then some metal polish. The ones I use from TW have been copper plated before the paint so this needs to be removed also
I use 120 and 160 grit sand paper to remove the paint, then some 400 grit to remove the scratches then some metal polish. The ones I use from TW have been copper plated before the paint so this needs to be removed also
Attachments
Here's a couple of pic's of my GGT with a rubbed down 801 before and after. I think it makes a world of difference.
I use 120 and 160 grit sand paper to remove the paint, then some 400 grit to remove the scratches then some metal polish. The ones I use from TW have been copper plated before the paint so this needs to be removed also
oooh, now das is reeel nice --
bling -- bling -------
Last edited:
Obie, that is so gorgeous, thanks for sharing the result of all your efforts. Rainy
That looks much better than mine! I tried that and failed tho the atomiser still worked!!
...try again
Also as we're talking bling, the chrome nut on the button is brass underneath and is easy to de-chrome as well. have a look at Di's enlarged photo of my GGT
- Status
