haha mine to NY for a week, at last some peace and some serious modding time..
- Status
Oh ya, plus, some big cash to spend too, you know, level the playing field a bit, she gets a week in Cabo and I get nothing?..don't think so...
Sent from my GT-I9100M using Tapatalk 2
Sent from my GT-I9100M using Tapatalk 2
The mailman brought new boxes, switches, and even no lead solder, No excuses to get to modding again.
Do you have a link to that box BJ? I like the white and the batt compartment...hard to judge the scale (are those 14500's?) if they are then space between the reg and that top left screw post may be a tight squeeze for the atty con...or just ditch that post altogether, should hold fine...except for the Ody box which uses magnets the covers on all my other Quigsworth boxes are just friction fit.
S1A-302112 NEW AGE ENCLOSURES is in stock | Buy S1A 302112 | Onlinecomponents.com
I got one white and one black
They are two 14500
yes on the room even with the post also a lot of room on top of the battery half
The sizes say mm and really inches look at the data sheet
I got one white and one black
They are two 14500
yes on the room even with the post also a lot of room on top of the battery half
The sizes say mm and really inches look at the data sheet
Last edited:
LOL, I was just looking at the data sheet...man, those drawings are a little vague
...if I wasn't so off 14xxx's I'd grab a couple of those in white for sure, the price is definitely right and the 2 compartment thing is so upscale Puck ...So I bit the bullet and ordered a couple of those v/a combo's (one's for my buddy, he cooked the driver in his precious LED Budweiser Beer sign)...think about sanding the face paint off the meter for the white box build BJ...a la Imod.
...if I wasn't so off 14xxx's I'd grab a couple of those in white for sure, the price is definitely right and the 2 compartment thing is so upscale Puck ...So I bit the bullet and ordered a couple of those v/a combo's (one's for my buddy, he cooked the driver in his precious LED Budweiser Beer sign)...think about sanding the face paint off the meter for the white box build BJ...a la Imod.I plan to do the same, the meter in my black 3AA box has turned white from use.
Your fingers and thumb did that to your meter?, you are getting your moneys worth outta' that mod BJ ...mind you, our juice has a nice "paint removal" effect...peeps ask how I get my Quigsworth boxes so shiny...it's cause they're covered with juice...I only vape 10mg now cause I swear I'm taking in 5 through my skin.
...mind you, our juice has a nice "paint removal" effect...peeps ask how I get my Quigsworth boxes so shiny...it's cause they're covered with juice...I only vape 10mg now cause I swear I'm taking in 5 through my skin.It sure is a paint remover I think it only stayed black for a week, my 2AA box PT I covered with SS 400 mesh and 4 coats of CA, The meter shines right through the mesh'.
Got some new toys today and sending the wife to visit our daughter for a week so I can do some serious modding.
Got some new toys today and sending the wife to visit our daughter for a week so I can do some serious modding.
The beginning of a new LM2596 metered Batt/PT VV mod..
Cool much smaller box, back to back compartments, holds two 14500..
Hey BJ43 did you order that board with the meter built on from a US supplier? I found ones like that on ebay but can't any US places to order from.
I bought three from China
http://www.ebay.com/itm/Voltmeter-L...lectrical_Equipment_Tools&hash=item231bed590b
http://www.ebay.com/itm/Voltmeter-L...lectrical_Equipment_Tools&hash=item231bed590b
Last edited:
It sure is a paint remover I think it only stayed black for a week, my 2AA box PT I covered with SS 400 mesh and 4 coats of CA, The meter shines right through the mesh'.
Sorry for offtopice, but what is it you have loaded up on the mod on the left side of this picture. Looks very cool and I think I would like to try one....
Sent from my AT100 using Tapatalk 2
Thanks for the info, I have some regular modules on the way now from china, I'll see how that goes before ordering more. I'm looking forward to seeing the mod you design with that unit.
Line V2 on the left and a cheap line on the right
IMO the Line V2 is the best rebuild able atty on the market
The V2 may very well be, actually getting one is a different story...I'm on the list for a V2 and an SS over on Vaporwall...waiting...no communication...ah well, I managed to land the Holy Grail, the Dead Sea Scrolls and a Bigfoot skin carpet...I'll eventually get a V2
...I'm on the list for a V2 and an SS over on Vaporwall...waiting...no communication...ah well, I managed to land the Holy Grail, the Dead Sea Scrolls and a Bigfoot skin carpet...I'll eventually get a V2lol I was lucky to pickup a V1 in the classies and got V2 about 2 months after I signed up. Surprised you haven't made a cheap line while you wait.The V2 may very well be, actually getting one is a different story
I bought 6 each of both sizes of the vision carts and gave them to my friends to vape. Waiting for them to pop so I can mod 6 of each size at one time. Making them so they just slide into the sleeve and not permanent.
I have...
I'm having a few issues with it... such as the flooding of the vape chamber (I'm considering asdaq's solution of a non-see-through air chamber, lol)...I nailed the air hole and wicking though...it's just a little fragile to pack around...now if I can only sort out my SGV3 issues...I sold one of my GTUS's, I actually got it work real well by boring it out to 3mm and use a 45mm x 45mm wick but the tank leak and condensation build in the outer cap and "WHY!" it was decided to thread the outer all the way to the top providing a nice little catchment system for all that condensate is anyone's guess???I have one last GTUS in the CO-OP (the one I sold was a pre-release) and may keep it as a curiosity but as an every day reliable vape???...honestly, lately I've discovered IKV's io6's...I know you're an "anything fiber" hater and I respect that but those io6's (IKV's ver. of a 306) are in a word "awesome"...they're "I haven't touched my Ody in days" good, though I'm sure the novelty will wear off
I'm having a few issues with it... such as the flooding of the vape chamber (I'm considering asdaq's solution of a non-see-through air chamber, lol)...I nailed the air hole and wicking though...it's just a little fragile to pack around...now if I can only sort out my SGV3 issues...I sold one of my GTUS's, I actually got it work real well by boring it out to 3mm and use a 45mm x 45mm wick but the tank leak and condensation build in the outer cap and "WHY!" it was decided to thread the outer all the way to the top providing a nice little catchment system for all that condensate is anyone's guess???I have one last GTUS in the CO-OP (the one I sold was a pre-release) and may keep it as a curiosity but as an every day reliable vape???...honestly, lately I've discovered IKV's io6's...I know you're an "anything fiber" hater and I respect that but those io6's (IKV's ver. of a 306) are in a word "awesome"...they're "I haven't touched my Ody in days" good, though I'm sure the novelty will wear off
What are you doing with the vision's...pics please or a thread link...
- Status
Similar threads
