nothing changes on my customer support, the way I make runs, the way I contact you. The only that will be done is to change direction poppa.
To my humble opinion, some things have to stay where they are. There is no reason to beat a dead horse (meaning that there is no reason to make something just to make it). Mechanical mods made their circle. There is nothing more we can do about them. You already know better than me that I discover those 5 years that we are topgether (with your help of course) the following:
mechanical mod itself
custom device (from scratch)
All mechanical button
All kinds of mechanical adapters
The slimmest cig (GGSlim)
Lock button
Grounded button
Laser engraving
All kind of batteries in only one device
Vaping at 7,4 volts
Drip in straight position without holding the device
E-cig in sections
E-cig with telescopic system
More than one version to satisfy all people (6 versions)
AFS (Auto Feeding System)
Removable button in 4 places
4 in 1 connector (you connect 801, 901, 510 atomizers and cartomizers too in a single connector)
First device from aluminium and from the hardest one (7075)
Passthrough
Wall plug
HV atomizers
Up to 6 volts vaping just from a single 3,7 volt battery
Cartomizer ready
2 tone e-cig (brass and aluminium)
Hot spring that melts if a short cirquit happens
2 sided spring, so it can be longer or shorter
Fuse to avoid short cirquits, hot battery or exploded battery
Autofeeding for all kinds of atomizers from their side holes
Adjustable draw for ALL types of atomizers
Automatically adjustable GGTS center pin to fit all atomizers
Adjustable center pin on GG atomizers so they can fit in any mod
SS flat catridge
Liquid collector
Magnetic button
Button with adjusted path (I was not first on this)
Adjustable liquid control (on UFS) so more or less liquid comes to atomizer
Four cuts on the connector's cap so all atomizers sit flush to the connector with no gaps
atomizer with sections to make it longer or shorter
The smallest rebuildable multiatomizer in the market with:
Future ability to add sections
Adjustable center pin to fit exactly to your connector
Adjustable liquid control from zero to max
Accepts E2 atomizers
Accepts 510 atomizer with or without liquid control
Accepts cartos punched or not punched
Stopper on the adjustable liquid control to avoid overflooding by mistake
Liquid is adjusted via mouthpiece
UFS compatible
Ability to be used as a single atomizer for dripping
fat wicks on rebuildable atomizers
Use of no resistance and resistance wire to build a coil by twisting them together
twisted resistance wires that holds juice on them so that drives to an even better vaping
coil on the wick and not coil around the wick
Ready build no resistance and resistance wire as one piece (also connected only by heat and not with solder)
Atomizer with the ability to set it in a basic feeding mode and still ability to use the adjustable liquid control
Atomizer with the ability to set it for hot or colder vape
Atomizer with 2 bases on the same unit (GGTS base and 510 base)
adjustable air on atomizers
Atomizer with external control of its center post's path to fit on all mods
Atomizer refilled in 3 ways (removing its base, from the big cap, from the small cap)
No tools are used to rebuild a GG atomizer
I first introduced the "hybrid" mods, and in a way that eliminates the disadvantages of existing hybrids in the market today
telescopic mouthpiece to fit all lenghs of atomizer with extensions (witch by the way I first introduce to the market)
kanelaz on metals
o-rings on ecigs.
So after all those things, there is no room for improvement. JustGG was the zenith of mechanical mods. What I can do now are some minor updates for it.
I dont want to make a GG without any innovation like other people make. I see a lot of front button devices out there with no innovation at all on them. So if I make for example a front button GG like I did 4 years ago with GGSlim and all people copied my design, that would be something?
I really dont see a reason to play in a field that a lot of people are around and making nothing more than different designs to attract people.
I dont say that mechanicals are outdated, I just say that I want to make something more than this. We together captivate the whole e-cig world with our innovations, so its time to do that again on another field.
Imeo, you've made the greatest contributions, challenged every standard, and produced quality & quantity. New ideas with every new production which have produced a huge string of home run hits, more than any other. You're going to shelve it all?
The coming new devices must be very well copyright protected to give you this much confidence? You have been immensely successful, I'm sure you know what your doing. I hope you retain this level of customer loyalty with your future devices.
