JUST IN & AVAILABLE NOW! MiT Micromizer x7 XL Dual LED Bottom Coil Clearomizers - THREE Color Choices and 2 OHM Choices!

[badkolo]

trust me just follow this video and you should be all good, this is something that truly needs to be done for all bottom coil cartos, you avoid putting pressure on the juice forcing it out the bottom, the only reason i didnt stress this with the vornado is because it has 2 open fill holes which alleviates the pressure and when placing the tip back on there isnt a vacuum forming.

 

[BonnyC]

These are tempting me, even though I have a bunch of vision extreme's and fluxos coming tomorrow I'm such an addict. I think I'll hold off til the Stardusts come in so I can make one purchase. Thanks for sharing!

 

[MsBree]

These really look inviting....I'll just put them on my shopping list for whenever I can make up my mind all the goodies to choose from!

 

[richham3]

This is exactly what you have to do with the CE4's to prevent juice from leaking out the bottom. The CE4 actually has a plug at the top that goes in before you insert the mouthpiece. I've found that inserting the plug partially, tipping the carto like you did in the video and then inserting the mouthpiece eliminates the leaking. Figured this out after filling my first one like you would fill a vision, putting it back together and watching the juice drip out the bottom.

 

[LordDavon]

Just save me a couple of boxes. You know how challenged I am with bottom coils. I was able to master the Vornado, and these are next on my list! ;-)

 

[Briar]

trust me just follow this video and you should be all good, this is something that truly needs to be done for all bottom coil cartos, you avoid putting pressure on the juice forcing it out the bottom, the only reason i didnt stress this with the vornado is because it has 2 open fill holes which alleviates the pressure and when placing the tip back on there isnt a vacuum forming....

So, as I understand it, this is what ought to be done with all bottom-coils, including the Sapphire, yes? (excluding the Vornado because the second fill hole works like a vent). Hm. I still have a few Sapphires lying around, I should try that...

Thanks, Bad, this is really useful. I'm really, really tempted by these now.

 

[badkolo]

This is exactly what you have to do with the CE4's to prevent juice from leaking out the bottom. The CE4 actually has a plug at the top that goes in before you insert the mouthpiece. I've found that inserting the plug partially, tipping the carto like you did in the video and then inserting the mouthpiece eliminates the leaking. Figured this out after filling my first one like you would fill a vision, putting it back together and watching the juice drip out the bottom.

well its not a trick , thats how your suppose to fill them ,lol

 

[badkolo]

So, as I understand it, this is what ought to be done with all bottom-coils, including the Sapphire, yes? (excluding the Vornado because the second fill hole works like a vent). Hm. I still have a few Sapphires lying around, I should try that...

Thanks, Bad, this is really useful. I'm really, really tempted by these now.

if you place your juice bottle into the sapphire with connector pointing down and apply pressure with bottle then squeeze to fill the sapphire you will force the juice down into the coil and up the air chamber or out the bottom, same goes for any bottom coil.

 

[Maddoktor2]

Thanks for these, guys - I ordered a package of the 2.2-2.4 ohm versions last night.

 

[vaporjoey]

Will my "bigger" cone off of my e-power fit over this? Also, can these be dry burned to clean? Very new to a bottom coil...Joey

 

[Aunt Cranky]

LOL seriously people. this is NOT FAIR I neeeeeeed replacement parts for the Stone Tank II, I waaaant to try a Stardust.. and now these which look super awesome.

Good thing shipping is so cheap or I would be extra cranky (can ya tell I'm impatient?)

So guys.. how do these new clearos work with thicker VG juice blends? Same wicking issue as the vornados?

 

[mwa102464]

I believe that big cone will fit, if not you can put the top end of it down on a belt sander and sand off just a smidgen to make it work Joey.

 

[burns_erin]

So these are basically a better Deux? same size OD?

Um these are bottom coil, not top coil like the visions. More in the category of sapphires, vortex, and vornado.

 

[burns_erin]

LOL maybe I should take the time and read, sorry for missing the obvious, but you were so much faster the actually reading. Thank you.

The better Duex was based on the Duex being discontinued, and this being the led unit that will be available.

But my question was really about the outside diameter size.

Ahh, sorry I got stick on one thing, lol. These he said, the diameter is the thickness of the newer fluxos, which is a bit fatter than a vision micro stretch but not as fat as a vision regular, and way thinner than a vision mini.

 

[richham3]

well its not a trick , thats how your suppose to fill them ,lol

I didn't say it was a trick. I've had ce4's for a month now and had to figure it out on my own. Filling them this way only prevents them from leaking immediately, but then I only tried two for a couple of fills and then quit using them.

 

[LordDavon]

All I know, is that I hope they aren't sold out before my direct deposit tomorrow. I want to get a couple of boxes of these, and the new Fluxos, for reviewing, modding, and letting my friends try. I am also going to get the cone for these, a few more Vornado, more Grande, some visions for friends, and probably whatever comes out next. There goes my paycheck!

Oh, and I am sure something else is going to drop soon... since I think Bad hinted at it (or announced it, and I am blonde... or bald).

 

[burns_erin]

Thank you as I said you are faster then reading and more efficient.

Much welcomes. I adore telling people things, especially when I can tell them what to do, lol. It brings me great joy

 

[byggd]

These require a special eGo cone to fit which we have in stock.

These look cool! Why is a cone required? I can't just screw it onto my ipro?

Oh ...... and can they be cleaned?

 

[badkolo]

a cone is not required but these cones are required if you want a cone that fits over a x7 or ce2.

 

[LordDavon]

I put an order in for a few sets of these and the improved Fluxos. I can't wait to put them under my microscope (figuratively). I have a lot of people at work wanting to try them, so I only get a few for myself.

I brought a modded cyclone to work this week, on my Infinity Pro. I went outside with all the smokers, and vaped along. It was great! I produced vapor, that looked like I was smoking. You couldn't tell the difference.

There are only a few people not vaping now. I was the first. I think we are up to 10! GV, you are doing the world a great service. I hope soon enough, that my health care costs go down.