Just recently bought a Kanger pro tank 2. And mentioned it In a earlier post. But anyways, it is leaking terribly. Googled it a bit and found that I need to keep it full. When it gets below half full it starts gurgling and leaking into mouthpiece terribly. It's brand new, did it as soon as I opened it up. Not the head cause I've tried others. Idk what to do now. Got any tips for a good tank for my Vamo?
Kanger Protank 2 leaking
- Thread starter Stroupe
- Start date
- th_trl_thread_readers 0
- Status
Where is it leaking at? If it's into the mouthpiece, try taking the rubber gasket that sits on top of the wicks, and placing it over the inner tube. Then use a new head....This worked for me...maybe it will help you.
make sure everything is screwed down tight and gasket is in pale snug......make sure that top post on the head is all the way down also....sometimes they can be loose.......if its doing it with different heads then double up on the gasket just to see if it helps and its not the heads....
If you happen to drop a wick, the atomizer can flood. I have had the same problem with mine once or twice. Usually what I do is tear it all down, give it a good cleaning and make sure that everything is back in place. You can also make sure that the post that goes over the coil and wicks is down tight. If you wiggle too much when you're trying to take that post off you can sometimes work the flanges out. That will also cause leaks.
I would start with the wicks, make sure everything is tight, and go from there. If it keeps up, I would contact Kanger support/e-mail and see what they have to say.
I would start with the wicks, make sure everything is tight, and go from there. If it keeps up, I would contact Kanger support/e-mail and see what they have to say.
It's brand new, never been dropped or anything. Ill try taking the gasket off and putting it on the post. It's not the heads either. Have tried multiple. I'll try some of your alls ideas. Thanks!
Same leaking issue i think if you over tighten the bottom u crush the silicone wick cover i used a disposable tip cover cut the mouth end of and double stacked the gasket now wicks are not getting fluid mine was also brand new as in 6 hrs old lost a full tank and a half of a tank of juice in that time very frustrating going back to the i16 clearomizer till i get this figured out .
Last edited:
hey I got this with my provari (amazing provari..love it) but it leaked first day to, took it fully apart made sure everything was tight/looked good all orings in place and it didn't leak for about 6 hours and then yet again... leakage. Switched back to my IClear30s, this is the best tank iv had out of the 4-5 I have bought before my provari as I used my iclear on my ego smok 1300 and never leaked either. its a great design and the dual coil attys last 3-4 weeks not 10-15 days and are only .50 cents more at my shop. only drawback is that its that plastic but I have found all 3 of the bottom coil atty tanks I have leak no matter how much work I do with them, I can get them to work for a day at most then it starts leaking or is slowly leaking the whole time. Iclear30s has NEVER leaked, (well once when I took the atty out to show my dad and there was still juice in the thing but that was all me, I claned it up and still NO leaks) id recommend the iclear30s to anyone, my buddy got me to get it because he was sick of leaking and its been great. but I had tried about everything I could find out there to get the protank not to leak, I swear the bottom coil ones are just tempermental. hope you have better luck or get an iclear as long as you don't smoke super cinnamon or citrus flavor that can make them crack or so I hear, but on their website they say that they can withstand these types of liquids even I just am not willing to try. I will still use my protank when I know ill be around the house and can maintain leaks if they happen but for one that will never leak on you... iclear30s 15 bucks attys last longer...
- Status
Similar threads
