Kanger ProTank II issues

[hishambachir]

Hi,
when connecting my protank II to my ego v2 i cannot get a real puf
i need to slow the screw very much in order to get something
any help pls?

 

[FearTX]

Use a 1.8 ohm coil on ego batteries, it works for me.

 

[LX1X]

I use pro tank mini and have no issues. :shrug:

 

[rawr]

Hi,
when connecting my protank II to my ego v2 i cannot get a real puf
i need to slow the screw very much in order to get something
any help pls?

You can try to screw the coil head a little bit more to the base if its possible or your center pin on your battery is pushed down to much (if its floating or on a spring) and cant connect to the bottom of the coil.

I had also occasionally problems with protank 1 and connecting to the innokin svd whick has spring loaded center pin and from time to time i have to lift it with the twizzers.

 

[Subdivisions]

Hmm. I don't understand the "slow the screw" part. Are you talking about taking a slow hit off of it or screwing it down on the battery??

 

[WelshVapour]

I've had that issue, i always get it sorted by removing the atomiser and making sure it's screwed down snuggly.
it's usually slightly loose whenever that occurs to me.

 

[rawr]

Hmm. I don't understand the "slow the screw" part. Are you talking about taking a slow hit off of it or screwing it down on the battery??

I think he meant screw the screw too much. lol english

 

[evan le'garde]

When i use my Protank II on one of my spinner batteries it has a tight draw. But if i put the same Protank on my other spinner battery it has a loose draw. If your Protank has a tight draw on that battery and you have no other batteries then there is nothing you can do. So i'd suggest you leave the Protank loose but tighten the thread cover to the Protank to keep it steady. You did get a thread cover with your Protank, right ?.

 

[diggyb]

Funny - I use a spinner and the only tight draw issues I've had with PT2s and 3s has been directly related to the head. Either it wasn't screwed in tight enough, or it was a dud. Using my GFs evod battery didn't change anything.

 

[Riding Nerdy]

Try using a protank mini base, it fits into the PT2 and makes it ego threaded. Also gives better airflow. I get mine at www.sun-vapers.com

 

[sleepyhatch]

You can try using a tank airflow controller to adjust the airflow for your preference. More info Tank Airflow Controller.

 

[a_e_u]

No vapour at all or airy draw? Just received my protank 2 today & it's so much more satisfying than the ce5 I was using previously. I saw on youtube the atomiser has to be screwed in firmly for better contact & to reduce leaking. Maybe you can give that a try.