Just curious if you received your clone yet? I also have an authentic, and am curious to see how the clone compares.
Kayfun mini clone? Does it exist?
- Thread starter Phone Guy
- Start date
- th_trl_thread_readers 0
- Status
Just curious if you received your clone yet? I also have an authentic, and am curious to see how the clone compares.
How is the airflow on the Iv0g0? Is the airhole on the side or the bottom? Thanks.
Airflow hole is on the side. I took the air adjustment screw out completely and it gave me a perfect draw (ironically this little guy seems to breath better than my KFL, KFL+, and Russian 91%...which is sad...yet good at the same time).
Still have no clue what I'm going to put it on (looks stupid on all my 22mm mods), but it vapes like a kayfun should - that's for sure. I actually loaned it to my friend who's using it on my iTaste VV 3.0 with a beauty ring and it's pretty cool (although REALLY long).
Last edited:
My Ivogo should be here later today, or Monday, I'll report back my experience with it once it arrives.
How is that 14500 nemi clone? I've had my eye on just that combo, nemi + mini Kayfun.
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
Of course, I have to wait until Monday, USPS sucks hard!
I have a 14500 Nemesis on Preorder, not sure anyone has one yet to try it, however supposedly it is a 1.1 of big brother Nemesis, so I couldn't imagine any reason it would not. I have a 14500 Bagua, everything I've tried flush mounts on it, and it isn't as nicely designed as the Nemesis.
I have a 14500 Nemesis on Preorder, not sure anyone has one yet to try it, however supposedly it is a 1.1 of big brother Nemesis, so I couldn't imagine any reason it would not. I have a 14500 Bagua, everything I've tried flush mounts on it, and it isn't as nicely designed as the Nemesis.
I have an original. IMO it is one of the best atties.
If you are not a sub-ohm fan EGO batteries are the best for Kayfun Mini... I know what do you think, but dont be prejudiced.
Especially if you buy one or two high quality VV battery (I prefer Joyetech Twist) it gives 4.8 Volt and it fits perfectly and it is a real joy. I bought one silver and one black Joyetech Twist, and two beauty rings (silver and black) and very happy with them. With a high qualty ego battery Kayfun Mini can be used effectively between 1.8 and 2.5 ohms and this does mean it gives 12 watt on 4.8V. (Actually the limit for EGOs is 2.5 Amper and 1.9 ohm (at max: 4.8V) , but I used it also with a 1.5 ohm coil)
14500 doesnt fit Kayfun Mini. IMO it doesnt look elegant on it.
Kayfun Mini's are also perfect for some e-pipes.
If you are not a sub-ohm fan EGO batteries are the best for Kayfun Mini... I know what do you think, but dont be prejudiced.
Especially if you buy one or two high quality VV battery (I prefer Joyetech Twist) it gives 4.8 Volt and it fits perfectly and it is a real joy. I bought one silver and one black Joyetech Twist, and two beauty rings (silver and black) and very happy with them. With a high qualty ego battery Kayfun Mini can be used effectively between 1.8 and 2.5 ohms and this does mean it gives 12 watt on 4.8V. (Actually the limit for EGOs is 2.5 Amper and 1.9 ohm (at max: 4.8V) , but I used it also with a 1.5 ohm coil)
14500 doesnt fit Kayfun Mini. IMO it doesnt look elegant on it.
Kayfun Mini's are also perfect for some e-pipes.
Last edited:
Anyone order theirs from Anglecigs? I ordered it on the May 7th, from the USA warehouse, and they still haven't shipped it.
I did, it took about 5-7 days processing, then it shipped. Mine came in yesterday.
Here's my Ivogo from angelcigs. Arrived in 5 days. Shown in standard mode with a 350 ego. It leaked at first - my fault for improper filling and leaving the wick too long. Works fine now. Seems to vape the same as my 3.1 clone and it's much better than the mini protank shown. Quality of the machining is good, however the finish of the two steel tubes was inconsistent (one was matte and the other semi-polished). I'll brush it with sandpaper. There's a lot of flexibility with it - in drip mode it's super short and in long mode it holds 6ml. BTW, the long chimney in included. On the genuine SM Mini, they charged extra for it. I think ego batteries go best with this, however I just ordered a cheap 14500 "M11" mod from FT to try it out on the sticker. Overall, I'm happy with it and I'd buy it again.
Last edited:
Ordered mine on the 5th, The day they showed in stock for USA warehouse, Shipping notification on the 7th, they didn't bother getting it to the PO until the 8th, if you ordered the 7th I'd expect you were in the mess of orders for them they probably had, so yeah, 2-7 WORKING days is what they say.
So far I've been fairly happy with Angel, I've placed 3 orders with them so far, and they beat the hell out of Halfasttech..
Will post up later today, when "hopefully" mine arrives.
Looks like the mysterious mini clone has finally arrived... Now I want one with the logo's! 
I ordered the clone yesterday (Sunday,the 11th) and received shipping notification already (the 12th). Angelcigs seems pretty responsive.
Mine has landed as well, flush mounts fine on my 14500 Bagua, though looks slightly goofy with its size difference, looks even goofier on my M11 FT special, looks pretty good on an ego battery, Does every bit as well as my full sized light+, 3.1, R91, like it better then the Taifun GS, though I think the GS is sturdier, as well as a bit temperamental to build.
And yes, mine does have the logo on the chimney, no leaks, same build as my full sized, pretty happy with it, will probably grab a Tobeco once they hit FT, with a 650 ego/short DT, its about same size as a sharpie, though it is a bit heavier. Took just a few minutes to toss a 1.2 micro-coil and some cotton in it.
Have wanted the real deal since first seeing them, but the price kept me from it, so all, in all, pretty happy with it, hopefully some replacement clear tanks will be on the table soon..
And yes, mine does have the logo on the chimney, no leaks, same build as my full sized, pretty happy with it, will probably grab a Tobeco once they hit FT, with a 650 ego/short DT, its about same size as a sharpie, though it is a bit heavier. Took just a few minutes to toss a 1.2 micro-coil and some cotton in it.
Have wanted the real deal since first seeing them, but the price kept me from it, so all, in all, pretty happy with it, hopefully some replacement clear tanks will be on the table soon..
Where did you order yours from?
And can we see some pictures please
Ordered from Angel on the 5th, I'm off to work, I'll get some pics later when I get home from work.
Quick Edit: Make sure to adjust the airflow, mine was pretty loose, and no spair in the bag, though it looks similar in size to some others I have. Also with Airflow screw all the way out it has a looser draw then my other KF devices, probably due to the short path to the chimney.
I can see some lost AFC slugs in this things future though.
Last edited:
I thought that the M11 FT special looked like an eGo in shape, although fatter to hold the 14500. But if it looks good on a 'real' eGo, why goofy on the M11? Or am I off in left field about the design of the M11?
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
Well I guess "Goofy" is in the eye of the beholder, and perhaps a little strong, maybe, "not so elegant" is a bit more to it, "Goofy", is it sitting on top of a Hades... Either way, I'm enjoying it way to much.. I've pre-ordered a mini Nemesis before I got this, should make a nice little package!
Logo Shot
Some Minis, Size Comparison
M11
Ego type bat with B-ring that comes with it.
14500 Bagua
MVP 2
Logo Shot
Some Minis, Size Comparison
M11
Ego type bat with B-ring that comes with it.
14500 Bagua
MVP 2
- Status
Similar threads
- Locked
