I'm using mine on an automatic. With 80/20 liquid, I don't have the feed open at all and it works just fine. Don't have the wobble issue either.
- Status
I have had good luck with the AGR tank that DV vapors is selling,AGR Tank - Stainless. Locks the base into place and has a fill hole. Just make sure that if you use anything with a fill hole to close the feed cup tube before filling as generally the liquid will pour out of the bottom as you are filling up the tank. It comes with two different tanks, one for regular size carto's and one is the XL carto version.
Last edited:
I've got a few X8 tanks on order--as soon as they come in, I'll let you know how they work.
X8 Carto Tank 3.0ml with Fill Port and Base Carto Secure Knob [gv-X8CartoTank] - $15.95 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more
For now though, I'm using my Terminators in IBTanked tanks and in my Phiniac Phineer, and they work just fine. Tricky to refill, but they work just fine...
For folks who are interested in rebuilding the coils on these attys, a supply of spare ceramic cups is a MUST.
405 Vaperz (in Oklahoma) has pre-made wicks and coils, already installed in the ceramic cups for $2.99 each:
eBaron Dripper Pro Replacement Heads - 405 Vaperz
Atmistique (in Athens Greece) has the cups for 1 Euro each:
ÎεÏÎ±Î¼Î¹ÎºÏ Diver
And apparently, you can use CE2 ceramics in this atty too, but I haven't been able to find a source for the ceramic cups alone. But you could just buy some cheap CE2s and tear them apart for the cups I guess. VaporBreak has CE2s for $1 each...
Cheapest ce2 Clearomizer - VaporBreak
405 Vaperz (in Oklahoma) has pre-made wicks and coils, already installed in the ceramic cups for $2.99 each:
eBaron Dripper Pro Replacement Heads - 405 Vaperz
Atmistique (in Athens Greece) has the cups for 1 Euro each:
ÎεÏÎ±Î¼Î¹ÎºÏ Diver
And apparently, you can use CE2 ceramics in this atty too, but I haven't been able to find a source for the ceramic cups alone. But you could just buy some cheap CE2s and tear them apart for the cups I guess. VaporBreak has CE2s for $1 each...
Cheapest ce2 Clearomizer - VaporBreak
I just set up my newly-acquired Phiniac Phineer with my second Terminator, topped it with a Citrine CherryVapes Ming, and filled it with some AiV "Sweet Tease", and set my eVic to 7.1watts.
Not only does it look AMAZING, it vapes like nobody's business.
Woofity, woof woof...
Not only does it look AMAZING, it vapes like nobody's business.
Woofity, woof woof...
yes, hold the 510 extender as you twist the top. or you can do it while its installed on your device. at least on mine you can. maybe i got lucky but my bulb section does not unscrew as easily as my juice control does.
i am really enjoying my KC. im on my third tank now and it is hitting smashingly.
i keep my juice control pretty wide. i had it at 100% open for a while but i was getting a gurgle when i left it unvaped for a period of time. so ive got it abotu 80% open now. no gurgle, big flavor, nice clouds.
im interested to see how this guy performs in my IBTanks. i should have my 5-pack of KCs in today so i'll check it out tonight. also, i plan to use a shorter unsealed 510-510 extender instead of the killer juice control / extender which is longer. should help a tiny bit with the height.
hey thx for the reply. that's just what I wanted to hear. looking forward to putting them in my AGR tank, sick of the inconsistency of cartos...
no problem. this is the one i plan on trying. i have others too that are the same but cant remember where they came from. empire mods i think.
510 Shorty Extension - Unsealed
Anyone with a 705 able to compare the two? I realize that build quality should probably be bracketed from the equation but apart from that - how is this little thing?
This could be just what i am looking for! !!! A rebuildable well ummm. . . Carto that hits like a dripper. I have around 10 carto tanks i use and also plenty of rba's. I have 25 feet of silica wick and 100 ft of wire on the way. It would be amazing to be able to rebuild my carto tanks with wick and wire as they are my out and about vape device. At home i use RDA and RBAs.
If these things turn out to work good and are easy to rebuild and are reliable, i will get 10 of them to replace all my cartos in my tanks
If these things turn out to work good and are easy to rebuild and are reliable, i will get 10 of them to replace all my cartos in my tanks
I got My Killer clones in a few days ago and loving them. They did come in a poly DCT tank. I drilled and tapped a side fill hole in it and place a screw that fits in it. No leaks. Success is sweet. Now I don't have to take the cap off to fill it. I would rather have a glass tank for it. But this keeps me happy till I can order a VallyViewVapes pyrex sidewinder that has a side fill hole. And keep the feed holes open only half way or less solves the vacuum issues. I am one happy vapor!
Day Four of having and using these devices, and I couldn't be happier.
Although I DID get my first "dry hit" on the one in my Phiniac Phineer this afternoon, because I was vaping the bejeezus out of some AiV "Sweet Tease", and because this tank is covered with beautiful wood veneer, and I wasn't paying attention to the juice levels. When I got that nasty hit, I looked through the little sight windows cut in the veneer, and realizes there was less than 1/2ml left in the tank.
I'll take that as a "win" even if the last vape WAS nasty... ;-)
Although I DID get my first "dry hit" on the one in my Phiniac Phineer this afternoon, because I was vaping the bejeezus out of some AiV "Sweet Tease", and because this tank is covered with beautiful wood veneer, and I wasn't paying attention to the juice levels. When I got that nasty hit, I looked through the little sight windows cut in the veneer, and realizes there was less than 1/2ml left in the tank.
I'll take that as a "win" even if the last vape WAS nasty... ;-)
The extension in my last post works. But, the pos pin on it is recessed. I'm not sure if they're all like that but mine is. However it works fine on the provari and CHaravela. Vamo not so much. No luck on the chichi either. The adapter makes it nice to lower the profile a few mm but not worth it unless you already own one. I'm gonna score some "official" adapters for my other four. I think I'm gonna chop the tube instead to lower the profile.
After using the 2 that I got last Friday for the entire weekend, I'm thinking the same thing. I may never put another carto in a tank again. All I need to do now is order more of these little gems. For the cost of ONE "Killer 705", I can get half a dozen Terminator RBAs, and have a week's worth of Carto Tanks in constant rotation...
. . 
all 5 of the ones I got have 1 hole in the bulb rather than the slots, but now i have come to the understanding that only is for the ground wire. The 510 connector on the bulb has the 2 holes like all attys and cartomizers have...
not digging them just yet, but havent had a lot of time to jack with them. the killer video a few posts below clears a lot up and i will work more on getting this up and running tonight
Last edited:
so any pics of how to rebuild the coil on these? using 28g wire i am unable to recoil the way they came...
also, for juice control you are unscrewing at the middle of the bulb correct?
also, for juice control you are unscrewing at the middle of the bulb correct?
- Status
Similar threads
- Locked
