KR808D-1 Manual Battery For a DSE901 Atomizer

[spider362]

I need some new batteries for my DSE901 and would like to get KR808D-1 manual instead of the DSE901 automatic that came with my kit, but have a few questions first.

1) Am I correct that the KR808D-1 battery will fit the DSE901 atomizer without the need for an adapter?

2) Does the button on the KR808D-1 manual battery still have sticking problems as some have reported?
This image leads me to believe the button may be tall enough to prevent this problem, although it does seem to be shorter than the Joye 510 battery.

3) Is there anything else I may not be aware of about using a KR808D-1 battery on my DSE901 atomizers?

Thank you.

 

[DonDaBoomVape]

1) Yep! The KR808D-1 battery will fit the DSE901 atomizer without the need for an adapter. The Kr8 batt is the only one I use (other than mods) for my 901 attys.

2) I think there have been improvements in the the button on the KR808D-1 manual battery, but I still prefer the Kr8 auto batt. Many Kr8 uses do prefer the manual.

3) The only thing to be aware of is that it doesn't work the other way around: Kr8 cartomizers often don't work on 901 batteries (or on 901 mod connectors).

If you want a skinny batt for your 901 atty, the Kr8 is the only way to go as far as I'm concerned. [Also, I suspect that the 901 will work just fine on the brand new 750 mAh Elegant Kr8 battery from CigEasy: kind of a Riva for the Kr8 cartomizer.]

 

[Kent C]

Don covered the others well, but on this one.....

3) Is there anything else I may not be aware of about using a KR808D-1 battery on my DSE901 atomizers?

...I'd point this out. Check the cutoff times and know that they may be overstated. I have some KR8s and there was one 280mAh batt was rated as an 8 second cutoff and it's closer to 4 - 5 seconds, which can be annoying, esp. when there's a 'time out' afterwards.