KR808D-1 MF Style batts?

[mstiel88]

I cant seem to find and answer, hopefully someone could help me. Im wondering if the new KR808D-1 MF Style batteries (bloog, Nhalers) will fit/work/charge in the regular KR808D-1 PCC?

The Nhaler KR808D-1 MF Style batts are (78mm) just to clarify.

 

[mstiel88]

The Nhaler KR808D-1 MF Style batts are (78mm) just to clarify.

 

[dormouse]

No idea what MF is

What are the mah? There are 3 sizes of real KR808D-1 batteries. The standard size w/ no carto are about 80mm not counting the threads and are 280mah and you can buy them at LiteCigUSA.net or anyplace else what carries KR808D-1. If you mean 80mm w/ a carto then look at the shorty KR808D-1 batteries. Check LitecigUSA.net or for fancy colors see Vapor4Life.com

Whatever Bloog sells they claim is better and no idea what Nhaler sells. Bloog claims their batteries have faster auto switch and more mah. I don't like autos.

 

[CBB]

I would assume the MF stands for maxxfusion which is the bloog d-1 it appears to be the standard d-1 battery and should fit in the pcc, even the XL 102mm batteries will charge in the case but it must be left open or modified to close around the battery sticking out of it.

 

[mstiel88]

Supposively Nhaler sells these new KR808D-1 MF Style batts, that are 78 mm long. he gives this description....

"These batteries are the new style switch recently popular for their performance over other KR808 batteries. These are made to work with our KR808D-1 Dripper Cartomizers but will also work with most other KR808 cartomizers. (78Mm)”

Now basically MF probably just stands for Maxx Fusion...so their suposse to be just like the new Maxx Fusion style batteries.

So my dilemma is that i allready have a V4L PCC, and i want to order two Auto Batteries to go with the PCC. I’ve heard some good things about these new style batteries with the better switches inside. so i was trying to figure out if anybody knows if these new styled batteries (maxxfusion, nhaler’s KR808D-1 M.F. style batteries) will work with my Vapor4Life PCC.

 

[mstiel88]

CBB,

ok thats what i thought, but wasnt sure. Ive been spending way to much time/research on weather or not these batteries will work. Ive heard that they will, but the lights on the inside of the PCC wont go off or somthing, but the tip of the battery light might dim? and overcharging is not an issue since these batteries have smart chips inside not allowing for overcharging. I’ve also heard they might not work.

But it looks like theirs more “it will work” than “wont”

I really like the KR808D-1’s, i just want to get two really great batteries that will last me all day in rotation. I was a newport pack a day smoker, so i vape quite heavily....so i just want something to look and feel like a cig, cuase my blu cig is just crap. and my 510 5V box mod looks like a bomb remote...lol so by now you get the picture.

 

[mstiel88]

If anybody else has any input, i would very much appreciate.

thanks in advance.

 

[Natalia]

I just posted in Nhaler's forum and asked. Here's the link to the thread if I don't get back here: LINK

 

[mstiel88]

Ok thank you very much Natalia!

 

[Natalia]

NP mstiel

 

[dormouse]

Where are you measuring? It sounds to me like they would fit in a standard KR808D-1 PCC - as I said above the standard KR808D-1 batteries are 80mm long not counting the threads and they fit in the PCC.

 

[mstiel88]

I just asked drew at Nhaler about the measurement, cause that's all it said on the site. I understand what your saying though.

 

[mstiel88]

Actually the Vapor4life battery (regular sized) 280-300 mah is 78mm.

So I'm assuming all other regular sized KR808d-1 battery's are also 78mm.

What you probably ment was it's 80mm with the thread.

 

[Natalia]

I just posted in Nhaler's forum and asked. Here's the link to the thread if I don't get back here: LINK

Drew just replied to the above link with a negative.

Personally, I don't think it has to do with the length, I think it's because of the changes to the internal stuff. (stuff - how technical am I?)

 

[mstiel88]

Thanks once again, Natalia!

Haha, don't get me all started on being all technical and STUFF...just kidding.

Well see her's the thing. I've read on some other post like so...http://www.e-cigarette-forum.com/forum/new-members-forum/180822-bloog-v4l-cartomizer.html that you could with the bloog maxx fusion battery. And I also read somewhere that drew said the batteries were the same besides the difference in pricing.

So part of me wants to say someone wants to make money on selling the whole kit. When I really don't need a whole kit. Just two batteries, which i would love to get the newer ones with the better switch inside.

So idk...I guess it's a toss up eh?

 

[beachpuff]

I've used my V4L PCC with my MF batteries. They charge, but the lights don't work properly like they do when you use a V4L battery, if that makes any sense.

 

[mstiel88]

Awesome. Beachpuff, so what battery would you suggest getting, which one do you like more? also whats the comparison on the battery life of each? Im trying to figure out which one to get, because i already own a V4L PCC, and just need to get two KR808D-1 batteries. I haven't actually owned a KR808 yet, so im trying to figure out the pros and cons of the two different kinds. I know the MF style suposively has a better switch inside, and possibly a longer battery life?...

Also have you tried Nhalers new KR808D-1 M.F. Styel batteries yet? if so do they work in the v4L PCC, i guess thats what im ultimately trying todo, because they are cheaper.

I would appreciate your input. also is their any indication that the battery is done? like the tip of the ecig light going out...or anything like that...

 

[mstiel88]

Where are you measuring? It sounds to me like they would fit in a standard KR808D-1 PCC - as I said above the standard KR808D-1 batteries are 80mm long not counting the threads and they fit in the PCC.

Dormouse,

Didnt you say in this post http://www.e-cigarette-forum.com/forum/new-members-forum/180822-bloog-v4l-cartomizer.html that the Bloog MF batteries would work in the V4L PCC?

 

[dormouse]

No I was not counting the threads. I was counting the bumpout of the LED end. Without the LED end it would be about 78mm

 

[robocig]

At least in my experience, the MF-style batts (or at least the ones from nhaler) do charge in the V4L PCCs. Don't know about other companies, but that's what happened to me.