Let's Talk Hardware
- Thread starter Pappy
- Start date
- th_trl_thread_readers 0
- Status
Dusty..I purposely ran a set of Sony vct4's down to 15% on the Sig 100..Going now to put them on the multimeter. bbl with the voltage report.
You don't like your VTC-4's?!
Lowest I've ever run my batteries is 49%.. I usually change them just as they are coming down to 50%.
You work support long enough, you learn to decipher a request for help.
In other words, don't answer what they asked. Answer what they meant to ask. I learned that conversing with women.
In other words, don't answer what they asked. Answer what they meant to ask. I learned that conversing with women.
I just saw his request as exactly what he worded it. I guess too much left brain usage going on here.
You don't like your VTC-4's?!
Lowest I've ever run my batteries is 49%.. I usually change them just as they are coming down to 50%.
Love vct4's..The Sig 100 starts shutting out at 15% and I removed those cells and the left battery tested 3.4v / right cell 3.3v on the multimeter. Safe for those cells imo.
In other words, don't answer what they asked. Answer what they meant to ask. I learned that conversing with women.
Well you're smarted that I am then..I never know what they really mean..lol
I see. I had trouble with connectivity with the Sotong ring on my P2. It was rather sporadic but then it eventually was the case instead of the exception. That's when I took the ball peen hammer to it and it solved the problem (sanding did not do the trick). Made the ring spin but that wasn't a problem.
Next time use a small flat head screwdriver and gently work the Provari's centre pin upwards. It may be in there with 500lbs of pressure, but it does move a touch if required. We're talking micro millimeters here.
It will save you the hassle of destroying a beauty ring.
Why does your comment say P3 but when I do a reply to quote it says something else?
That Sotong wont work on your P3.
That's not bad at all. I'd love to know what they measure around 30 or 40% next please.
Pop's is changing his comment as he's noticing mistakes he's made..
We're just replying too damn quick!
That's not bad at all. I'd love to know what they measure around 30 or 40% next please.
No problemo can safely say that would be around 3.5 to 3.6v..I'll test that math though.
Last edited:
Well you're smarted that I am then..I never know what they really mean..lol
Guessing at what they meant to ask yields only a .250 batting average but it is still better than the 0% if you answer what they asked.
I had to correct the earlier post. No ring needed on P3. I bought a black beauty ring and a black HCigar KFL + to match the black P2. I actually tried backing off the center screw of the HCigar about a turn and a half, but still didn't connect. So I filed it. Can't really see where it's been filed once it's in place.
Guessing at what they meant to ask yields only a .250 batting average but it is still better than the 0% if you answer what they asked.
Yes sweet stuff..is the 100% correct answer from me.
I'm guessing aluminum, by weight and strength. Black finish was just a powder coating, maybe....
- Status
Similar threads
- Locked
- Locked
