Y'know.. that Lemo does not look half bad, and it is single coil. Hmmm!
What was it that PB didn't care about with it, d'ya remember?!
What was it that PB didn't care about with it, d'ya remember?!
Let's Talk Hardware
- Thread starter Pappy
- Start date
- th_trl_thread_readers 0
- Status
If I had a drill-press, I probably would. Don't want to take a chance with Dremel or regular drill.
I have a drill press. Maybe we'll have to figure out a trade to make it worth the shipping. I'm really running lean these days so I don't have much to send back your way. Maybe you just send all your KFLs if you want them all done. I'm more than happy to mod your KFLs if that's what you want. I gotta try and remember how they were drilling their KFLs and what success they were having. It's been a long while since that was discussed and my memory sucks.
And I wouldn't want to use a dremel or hand drill either. That's too sloppy.
Nah.. got enough "airy" rta's now. If I really feel like getting a KFL modded, I'll just get a Lemo drop, would probably work out cheaper than two way shipping to you and back.
Thanks though!
The Lemo was something I looked at for the future. The only thing the bottom piece of the chimney was flimsy. The metal is not as thick I think, as most Kayfun type tanks.
Well I put the batteries back in the charger. This time they started charging. Maybe they were too cold to charge initially? I waited probably 15 mins before trying them. I had them in my hands warming them up, before I put them in the first time. The arrows were just were stationary, and it wasn't charging. This time I checked them with the multimeter. It said they were both 3.5 volts. Well, I put them in the charger, and they are now flashing the arrows, meaning it is charging them both. They are at 3.7v now, and still going.
Y'all, I hope you know my case of shinyitis has not gotten better since visiting this thread. I have about talked myself into a SVD2 from Fast Tech.
Well I put the batteries back in the charger. This time they started charging. Maybe they were too cold to charge initially? I waited probably 15 mins before trying them. I had them in my hands warming them up, before I put them in the first time. The arrows were just were stationary, and it wasn't charging. This time I checked them with the multimeter. It said they were both 3.5 volts. Well, I put them in the charger, and they are now flashing the arrows, meaning it is charging them both. They are at 3.7v now, and still going.
Y'all, I hope you know my case of shinyitis has not gotten better since visiting this thread. I have about talked myself into a SVD2 from Fast Tech.
I think the one thing he mentioned not caring for on the Lemo was how the AFC was adjusted... you remove the base and change the nut that is found under it to change the air flow. I could certainly see that as being a little cumbersome but what really concerned me about it was how loose that nut looked when he was turning it. It appeared loose enough to me that it could just vibrate enough and have the air flow increase on you.
Well the 18650 batteries charged up completely. Both read 4.2 so they are good to go now.
I just got through changing out the Kayfun 3.1 o rings. The one I was concerned about before had begun a very slight leak. I decided to check a couple of others, and two more needed changing for sure. So after finding that, I changed all of them out, just to be safe. The Kayfun is humming along now.
I just got through changing out the Kayfun 3.1 o rings. The one I was concerned about before had begun a very slight leak. I decided to check a couple of others, and two more needed changing for sure. So after finding that, I changed all of them out, just to be safe. The Kayfun is humming along now.
Papaw, Rob just confirmed side button for the Resin..
http://www.e-cigarette-forum.com/forum/reos-mods/638073-resin-mods-7.html#post14960629
I was in bed, have to (try to) sleep once in awhile. Basically Rob says 'Exactly' like the newer Woodvil, meaning Low Profile & Mechanical Side Fire Button. Which means I might have to keep an eye on our old friend Chowderhead. Have you got your two BF attys in yet, Dusty ?
They got delivered yesterday I think. I say that because Reception told me two packages came in for me. Should be MVJ and Chowders stuff, unless it's the syringes that April sent me and the external hard-drives that I ordered.
I'm at home, sick, so won't know for sure until I get back in the office. *shrug*
I mailed my package the 31st. They said 6-10 days. I doubt it's my package.
Yeah, saw that one too. Another dual coiler.. I'm looking for singles.
Good grief!!!
Running the dual coils (.7 ohm) Aqua V2 with 12mg Max VG Blueberry Custard (Galleon from Capt. Olivers) at 30W.
Nic buzz coming up in 3 - 2 - 1. ZOMG!!
Nic buzz coming up in 3 - 2 - 1. ZOMG!!
Running the dual coils (.7 ohm) Aqua V2 with 12mg Max VG Blueberry Custard (Galleon from Capt. Olivers) at 30W.
Nic buzz coming up in 3 - 2 - 1. ZOMG!!
Did you see MOV came out with four new custard vapes? A blueberry, chocolate, strawberry and one other one. 15% sale. They name them after famous mobsters.
Yeah, got the email yesterday. May have to give them a try someday.. just not anytime soon.
Yeah, got the email yesterday. May have to give them a try someday.. just not anytime soon.
Just not anytime...for me.
I'm officially over my custard phase. I got some POET (maple tobacco one) in my stocking for Christmas. Trying that later this week.
I'm running duals at .6 ohms 24mg 100%VG DF in the Aqua V2 , YuMmmmm !Running the dual coils (.7 ohm) Aqua V2 with 12mg Max VG Blueberry Custard (Galleon from Capt. Olivers) at 30W. Nic buzz coming up in 3 - 2 - 1. ZOMG!!
- Status
Similar threads
- Locked
- Locked
