Let's Talk Hardware
- Thread starter Pappy
- Start date
- th_trl_thread_readers 0
- Status
Howdy all!
OK, so I've built a few successful TC coils now. That Atlantis 2, while ugly in my eyes - a ginormous tank for only 3ml capacity - really is a tasty vaping experience. It provides so much versatility in air flow, which is a kind of temperature control in its own way
I pulled apart one of the Atlantis coils and wrapped my own nickel coil to put in there. Man, these things sure are easy to rebuild compared to the old T3s that I used to rebuild. My coil worked perfectly and gave me confidence to give it another try in the ErlK.
So I did another coil for the ErlK at 0.116Ω and it's been going strong so far. Just about to the bottom of my third tank of DF in here. I think I'll pop her open this time to have a look at the coil & wick. DF isn't very gunky, and it's pretty hard to vape the ErlK dry, so this still isn't a very good test of TC. I've been too lazy/busy to get another (or sacrifice one of my existing) RDAs to give TC a good test.
In fact, I've been running another ErlK with Kanthal A1 a twisted, spaced 1.8Ω coil on my Vapor Shark and, with side-by-side comparisons I can't taste any difference or really see any advantage to the TC with this setup. Maybe it would be useful if I can't see the juice level with a steel tank on the ErlK.
Obviously, I'm still a newbie with TC, but heck, even if TC isn't for me, this SXmini M is a really nice mod in VW or bypass mode!
OK, so I've built a few successful TC coils now. That Atlantis 2, while ugly in my eyes - a ginormous tank for only 3ml capacity - really is a tasty vaping experience. It provides so much versatility in air flow, which is a kind of temperature control in its own way
I pulled apart one of the Atlantis coils and wrapped my own nickel coil to put in there. Man, these things sure are easy to rebuild compared to the old T3s that I used to rebuild. My coil worked perfectly and gave me confidence to give it another try in the ErlK.
So I did another coil for the ErlK at 0.116Ω and it's been going strong so far. Just about to the bottom of my third tank of DF in here. I think I'll pop her open this time to have a look at the coil & wick. DF isn't very gunky, and it's pretty hard to vape the ErlK dry, so this still isn't a very good test of TC. I've been too lazy/busy to get another (or sacrifice one of my existing) RDAs to give TC a good test.
In fact, I've been running another ErlK with Kanthal A1 a twisted, spaced 1.8Ω coil on my Vapor Shark and, with side-by-side comparisons I can't taste any difference or really see any advantage to the TC with this setup. Maybe it would be useful if I can't see the juice level with a steel tank on the ErlK.
Obviously, I'm still a newbie with TC, but heck, even if TC isn't for me, this SXmini M is a really nice mod in VW or bypass mode!
So someone help me find the Purple in Purple Heart....
My daughter says pinkish- red, although it looks reddish- brown to me...
My daughter says pinkish- red, although it looks reddish- brown to me...
It looks reddish brown to me too but my wife and I disagree on colors all the time , I wonder what it looks like to BK , he's actually color blind .
I dunno , but he does have a rainbow Panzer .
Maybe his SVD is a pretty florescent pink, and he doesn't know it ...
So someone help me find the Purple in Purple Heart....
My daughter says pinkish- red, although it looks reddish- brown to me...
purple heart is a purple when it has been allowed to oxidize.... but the wood in the picture didnt have time to "age" and turn purple... and Cocobola when sawn has sawdust that looks exactly like cayenne pepper and Zebrawood smells like cow pee when cut...
looks more brown than red more on the orangey brown side definately not purple heart purple or even fresh cut purple heart purple...
Maybe his SVD is a pretty florescent pink, and he doesn't know it ...
if thats the case... then Retics SVD is florescent pink too
Not to the extent you are , but supposedly all men are .
Women see green really well
OK, so the wood is still to fresh to show it's color ? Also, this mod has a Polyurethane finish. Maybe in time it will "age'....
the picture is a bit fuzzy but this is what aged Purple Heart looks like ( the wood below the metal rods)
and this is what the Purple Heart is sitting in... made it myself during my creative woodworking days
- Status
Similar threads
- Locked
- Locked
