I have this AGR+ tank - fantastic tank by the way, I highly recommend it. I use it with Smok cartos that I punched 2 holes in. It works great, but I have this problem: when the tank is more than half full, I have to unscrew the fill hole screw slightly to let air in, otherwise the juice won't flow into the carto and I get a burnt taste. Is that something you experience too?
Liquid feeding and low air pressure in AGR+ tank
- Thread starter Giraut
- Start date
- th_trl_thread_readers 0
- Status
I don't personally own an AGR, but I have read of issues with the negative pressure inside of these tanks. That's one of the reasons that I never got one.
Also, if you are using dual coil cartos, I suggest you switch to single coils. I've found that the top coil in the dual coil carts will burn the filler due to the fact that the low punched hole never allows adequate wicking to the upper part of the cartomizer. You won't experience that problem with a single coil carto.
Also, if you are using dual coil cartos, I suggest you switch to single coils. I've found that the top coil in the dual coil carts will burn the filler due to the fact that the low punched hole never allows adequate wicking to the upper part of the cartomizer. You won't experience that problem with a single coil carto.
- Status
