if i'll be using this schematic (above) where could i put a on/off switch? and is there a specific type of on/off switch needed same with the momentary switch? tia
- Status
if i'll be using this schematic (above) where could i put a on/off switch? and is there a specific type of on/off switch needed same with the momentary switch? tia
Yes you can use that converter, just put a push button switch on the (+) out to the atty connecter. The on off that comes with it will be your master switch.
Yes, I have one with a 12v Lipo Batt
http://www.e-cigarette-forum.com/forum/battery-mods/220307-vvbox-vvpassthru.html
http://www.e-cigarette-forum.com/forum/battery-mods/259577-just-lm2596-users.html
Last edited:
You can put the on off switch on the positive wire before it gets to the button from the battery. Just a slide on off at least 3amp will work, 3amp for the button also.
if i'll be using this schematic (above) where could i put a on/off switch? and is there a specific type of on/off switch needed same with the momentary switch? tia
I'm a little late to this party, but I think the on/off switch on the board just controls the LED voltage display.
Again, here is the link to the board:
http://www.ebay.com/itm/DCDC-Step-d...ltDomain_0&hash=item3cbe5fc1f1#ht_2710wt_1398
Wondering if anyone has used one of these yet? They do look kind of big, but I have been thinking about making some bizarre mods out of larger household items. This looks like a good easy in easy out board for that. The only thing I don't like about it besides the size, is I'm not a fan of the blue 25 turn trimmers. I prefer a thumbwheel, or one turn pots.
A dual 18650 bat holder, a 510 adapter with nut, a little epoxy and hookup wire, and voila, you have a mannequin head mod to freak all your friends out with.
Your right it just cycles the meter reading between imput and output, that was why I bought the other model with the jumpers and put my own switches. I don't like the glare with the meter on all the time.
Here is the LM2595 board with meter onboard from ebay , took the legs off it and sanded its sides just a hair .
I like the easy connectors for the wire attachments. Little white switch pressed lets me see battery volts or vaping voltage.
Works fine for me. I hot glued the tactile switch. I did JB weld the atty connector after picture was taken.
In a 4AA box
I like the easy connectors for the wire attachments. Little white switch pressed lets me see battery volts or vaping voltage.
Works fine for me. I hot glued the tactile switch. I did JB weld the atty connector after picture was taken.
In a 4AA box
Last edited:
The one i had bought was much less expensive i recal, had to wait a while as it came from Japan or China and 3 or 4 amp, the meter goes on when atty switch is pressed and does not stay lit otherwise but it is kinda large .I'm a little late to this party, but I think the on/off switch on the board just controls the LED voltage display.
Again, here is the link to the board:
http://www.ebay.com/itm/DCDC-Step-d...ltDomain_0&hash=item3cbe5fc1f1#ht_2710wt_1398
Wondering if anyone has used one of these yet? They do look kind of big, but I have been thinking about making some bizarre mods out of larger household items. This looks like a good easy in easy out board for that. The only thing I don't like about it besides the size, is I'm not a fan of the blue 25 turn trimmers. I prefer a thumbwheel, or one turn pots.
A dual 18650 bat holder, a 510 adapter with nut, a little epoxy and hookup wire, and voila, you have a mannequin head mod to freak all your friends out with.
Would like to fine a source for those sets like they put in the tube mods that display many more options nowadays. ; )
- Status
Similar threads
- Locked