Little itty bitty mods under $100.

[gerrymi]

Anyone have any thoughts on what else I might consider?

Hi aldenf...welcome "back"...

Since you asked...my current FAVORITE mod...hands down...is the Sinuous P80...

It has INCREDIBLE "hand comfort"...and you never have to waste any time looking at it before you pick it up...(handy when you're driving)(or even just surfing the internet)...because no matter how you pick it up...you just squeeze => it FIRES...



WISMEC SINUOUS P80 80W TC Box Mod


..

 

[tearose50]

LostVape Orion Pod System

It is powered with a dna chip, but they don't mention this.

Actually they do mention it, but only mention -- no data.

And -- where is this for sale? I see one preorder only in my casual search....and I want the mother of pearl.

 

[BillW50]

Actually they do mention it, but only mention -- no data.

I thought they must have updated the page since I was there. But no, I still don't see Evolv or dna mentioned.

And -- where is this for sale? I see one preorder only in my casual search....and I want the mother of pearl.

Lost Vape Orion 40W DNA Go AIO Kit | Pod System

They say they are out of stock and about 30 bucks higher than the other places I've seen it listed for preorder. But to be honest, I don't think they are being mass produced yet.

 

[DPLongo22]

Contestual Manoeuvres in the Dark

8 x Orion DNA GO by Lost Vape

 

[KC0YNU]

Saw this in another thread and instantly thought of @Katdarling
dotBling (Limited Edition Mech Mod / CZ stones) - dotmodretail

definately not under $100 tho

 

[DPLongo22]

Saw this in another thread and instantly thought of @Katdarling
dotBling (Limited Edition Mech Mod / CZ stones) - dotmodretail

definately not under $100 tho

Are there humans that would actually pay...

"Ohhh, my GOOD-ness!*"

* thank ya, Lucas!

 

[DavidOck]

Yep, WC Fields was right on that one.

 

[aldenf]

Primo! Ignore the silly clock. Mine runs fast (which is more than I can say for me).

I knew this was the place to go. Thanks! And I'm sure that clock is only going that fast to keep up with you.

 

[aldenf]

Kareful there, my dear ol' bud. Walkin' on thinish ice you are. (spreadsheets are like SOOOOOOOO 2016, dude.)

So, you're interested in the Primo Mini, eh? (DPL, help me out here... that's our BME, yah?) Anyway, I do believe I own one and I'll tell ya, the more I use that little thang, the more I like it! Especially now that we got rid of that nasty time-telling mechanism.

I only wish they came in GOLD..... le sigh. (Le lie)

Color can always be changed, you of all people must know that.

I've had my eye on one for a while now, in stainless. Are you and @DPLongo22 running an alternate firmware or stock?

 

[aldenf]

Hi aldenf...welcome "back"...

Since you asked...my current FAVORITE Mod...hands down...is the Sinuous P80...

It has INCREDIBLE "hand comfort"...and you never have to waste any time looking at it before you pick it up...(handy when you're driving)(or even just surfing the internet)...because no matter how you pick it up...you just squeeze => it FIRES...



WISMEC SINUOUS P80 80W TC Box Mod


..

Thanks! Good to be back.

Hmmm... Very, very interesting. Worth looking at!

 

[aldenf]

Kareful there, my dear ol' bud. Walkin' on thinish ice you are. (spreadsheets are like SOOOOOOOO 2016, dude.)

No more spread sheets? You've moved on to a YouTube channel?

BTW. I'm a bit disappointed in the complete lack of bling in the photo you provided. I expect more of you than pastel drip tips.

 

[aldenf]

Are there humans that would actually pay...

"Ohhh, my GOOD-ness!*"

There's a fool born Eeevry minute...

Perhaps a source for @Katdarling to get her boring mods gilded or is that gelded?

 

[DPLongo22]

Are you and @DPLongo22 running an alternate firmware

Not me, Alden. I don't ever hook my mods up to my computers. I expect it to work when I receive it, and continue working until I'm done with it. No software wrestling with my vape. I do too much of that all day long, and nobody's paying me to do it with my mods.

@Katdarling , on the other hand, has been known to tinker (sometimes). I'm not sure what she's done with this mod though. She's not what I'd call "predictable" (in any way, shape, or form).

<3yaKitty

 

[aldenf]

Not me, Alden. I don't ever hook my mods up to my computers. I expect it to work when I receive it, and continue working until I'm done with it. No software wrestling with my vape. I do too much of that all day long, and nobody's paying me to do it with my mods.

@Katdarling , on the other hand, has been known to tinker (sometimes). I'm not sure what she's done with this mod though. She's not what I'd call "predictable" (in any way, shape, or form).

<3yaKitty

I don't blame you. Who wants to compile code for a mod? Old cell phones are bad enough. OTOH, a custom firmware could fix your ticker. I just barely caught mention of third-party firmware for Joyetech devices and am curious if it's necessary.

As for @Katdarling and her proclivities... predictability is so over-rated (except for mods). I mean, stinkies are the height of predictability, right? However, my grandma did teach me that a lady doesn't tinker in public.

 

[DavidOck]

I run - among others - a couple Primo Minis, and just use the internal menus to shorten the clock display. Haven't even looked into software to reprogram them, since they fit my needs right out of the box. Comfortable to hold and use.

While many do like the Sinuous, I personally don't care for the center position of the 510. If that's not an issues for you, also a good choice.

 

[gerrymi]

While many do like the Sinuous, I personally don't care for the center position of the 510. If that's not an issues for you, also a good choice.

With "Off-Center-510-Mods"...I find I'm frequently banging them into my lips...knocking out teeth...etc....

..

 

[Katdarling]

Saw this in another thread and instantly thought of @Katdarling
dotBling (Limited Edition Mech Mod / CZ stones) - dotmodretail

definately not under $100 tho

LOL!!!!! Has anyone a coupla thousand dollarinos I might borrow?

Color can always be changed, you of all people must know that.

I've had my eye on one for a while now, in stainless. Are you and @DPLongo22 running an alternate firmware or stock?

Alternate WHO? Tho your mamma also told me not to "tinker in public", my lack of predictability now tells me that I have no idea if I did some firmware thingie or not. Oh wait, that's not on the predictability scale is it. That's on the I don't have a klue or remember scale.

Sadly, if DPL doesn't know, then none of us know. I don't even know how to check if I altered the darn thing! (nor do I kare muchly)

There's a fool born Eeevry minute...

Perhaps a source for @Katdarling to get her boring mods gilded or is that gelded?

Alden daaaaaahlink. You dun like my minimal BLING? Oh dear. I feel so forlorn now. sniff.

Not me, Alden. I don't ever hook my mods up to my computers. I expect it to work when I receive it, and continue working until I'm done with it. No software wrestling with my vape. I do too much of that all day long, and nobody's paying me to do it with my mods.

@Katdarling , on the other hand, has been known to tinker (sometimes). I'm not sure what she's done with this mod though. She's not what I'd call "predictable" (in any way, shape, or form).

<3yaKitty

<3yas back, Longolino.

I don't blame you. Who wants to compile code for a mod? Old cell phones are bad enough. OTOH, a custom firmware could fix your ticker. I just barely caught mention of third-party firmware for Joyetech devices and am curious if it's necessary.

As for @Katdarling and her proclivities... predictability is so over-rated (except for mods). I mean, stinkies are the height of predictability, right? However, my grandma did teach me that a lady doesn't tinker in public.

But we DID fix the ole ticker! (without the slightest tinker) As you can see in the pic below, not a ticker to be found in view. <patting shoulder>

I run - among others - a couple Primo Minis, and just use the internal menus to shorten the clock display. Haven't even looked into software to reprogram them, since they fit my needs right out of the box. Comfortable to hold and use.

While many do like the Sinuous, I personally don't care for the center position of the 510. If that's not an issues for you, also a good choice.

You don't LOVE the center 510?? I bought a 1/2 dozen mods just to HAVE that design!

Ok, thanks little bitties. Gotta fly.







(for Alden)

 

[gerrymi]

Saw this in another thread and instantly thought of @Katdarling
dotBling (Limited Edition Mech Mod / CZ stones) - dotmodretail

definately not under $100 tho

According to my "Handy-Dandy Money Saved With Vaping Banner"...I could buy three 24K Gold dotBlings...and...three Sterling Silver dotBlings...and...still have $148 left over...

..

 

[Susaz]

Not me, Alden. I don't ever hook my mods up to my computers. I expect it to work when I receive it, and continue working until I'm done with it. No software wrestling with my vape. I do too much of that all day long, and nobody's paying me to do it with my mods.

@Katdarling , on the other hand, has been known to tinker (sometimes). I'm not sure what she's done with this mod though. She's not what I'd call "predictable" (in any way, shape, or form).

<3yaKitty

The only mods I fiddle with are SS316 profiles on DNAs. I downloaded one that works like a charm, and it's the only thing I touch.

 

[DPLongo22]

The only mods I fiddle with are SS316 profiles on DNAs. I downloaded one that works like a charm, and it's the only thing I touch.

I've only got two profiles.

Left & right.