Little itty bitty mods under $100.
- Thread starter Katdarling
- Start date
- th_trl_thread_readers 0
- Status
The full size one is excellent but be sure to buy the extra airflow adapters to get the best from it.
The drip tip on the mini looks odd (you do get a smaller one included) but it's actually fantastic.
You can buy optional airflow decks for the mini for a couple of dollars. Worth doing as the single hole deck improves a great flavour to fantastic. I'm yet to try the 0.6mm airflow deck as I feel it may be a tad tight for me.
Not even in the ballpark for me. I like 1.8 mm-2.5 mm airflow intakes. And thanks for your response.
The supplied deck with two airflow holes and using the largest airflow hole on the airflow ring puts it in your area but the larger one would fit your requirements better for sure.
And thanks for your response.
Lovely tanks and cthulhu mod are a great company to deal with. We've road tested a few tanks and rda's over here and they've instantly changed production to fix any issue while offering to upgrade any current owners. Don't see that too much.
They've a very cute New mosfet mech out to match the hastur range. You can use it in 18650 or 18500 mode and has a side firing button. Again very cute little mod.
I didn't like the fact that the glass tube was not attached to the top cap--neither did the reviewers. But it seems that this has been addressed already, hence my renewed interest in the tank.
Thanks. I'm good in the mod department. Just got my eVic Primo mini and the Aurora Play pod yesterday... Need to take those for a test drive.
Maybe...but...but...but...it's just SOOO EASY to stick a couple Justfog Minifits in my pocket when I'm headed out the door...
(And...if I lose one...I'm only out $10.)
..
True but I think I picked all of mine up at around $20. Previously to get a mtl vape of that quality I'd have to look at gp, by leo, eden or kayfun. Were they in a production phase, does anyone have any and am I willing to pay $100 +.Maybe...but...but...but...it's just SOOO EASY to stick a couple Justfog Minifits in my pocket when I'm headed out the door...
(And...if I lose one...I'm only out $10.)
..
It's been a great eighteen months for mtl vapers. The berserker, siren, hastur and true all deliver excellent flavour on par with the expensive boys.
Previously I had to use a clone for out and about. Now if anything happens I know I can grab a mini from dozens of sources for the price of 40 cigs here.
Maybe...but...but...but...it's just SOOO EASY to stick a couple Justfog Minifits in my pocket when I'm headed out the door...
I only get burnt hits out of my Minifit. I guess they just aren't designed for heavy duty use. My fingers always wants to type out misfit instead of minifit.
Interesting...Bill...
I think I'm one of those referred to as a "chain-vaper"...but...I gotta' say...the next burnt hit I get from my Minifit...will be the first burnt hit I get from my Minifit…
..
Last edited:
Im still using the eleaf Aster can you guys give me the updates on newer stuff?, i havent been paying attention 80 watts or under please.
sky...I realize that this is not a "Little itty bitty PODS" thread...but...after I got my first couple Pods..."only" for Out and About...I find myself using them more and more around the house...
SOON to be arriving...the Innokin Z-BiiP Pod System...(for about $25)…
Uses any of the current Zenith coils...and a new PLEX3D mesh coil 0.48ohm...1500mAh battery...three (11W,14W,16W) Power Settings, AFC, Side Firing Switch...
Minor qualms (for me)...Pod is only 2ml....requires needle-tipped bottle for refilling (but is included)…
(Being a collaboration between Phil Busardo and Dimitris Agrafiotis can't hurt)…
INNOKIN/PLATFORM Z-BIIP Kit - Innokin
..
sky...I realize that this is not a "Little itty bitty PODS" thread...but...after I got my first couple Pods..."only" for Out and About...I find myself using them more and more around the house...
SOON to be arriving...the Innokin Z-BiiP Pod System...(for about $25)…
Uses any of the current Zenith coils...and a new PLEX3D mesh coil 0.48ohm...1500mAh battery...three (11W,14W,16W) Power Settings, AFC, Side Firing Switch...
Minor qualms (for me)...Pod is only 2ml....requires needle-tipped bottle for refilling (but is included)…
(Being a collaboration between Phil Busardo and Dimitris Agrafiotis can't hurt)…
INNOKIN/PLATFORM Z-BIIP Kit - Innokin
..
This pod made me drool - it has everything
Asmodus colossal 80w mod - $32.95 if you don't mind a touch screen. Before this mod I was a pico fanatic, but it vapes better and has a better hand feel than the pico.
Wismec p-80 mod is another goodie - has a fire bar
sky...I realize that this is not a "Little itty bitty PODS" thread...but...after I got my first couple Pods..."only" for Out and About...I find myself using them more and more around the house...
SOON to be arriving...the Innokin Z-BiiP Pod System...(for about $25)…
Uses any of the current Zenith coils...and a new PLEX3D mesh coil 0.48ohm...1500mAh battery...three (11W,14W,16W) Power Settings, AFC, Side Firing Switch...
Minor qualms (for me)...Pod is only 2ml....requires needle-tipped bottle for refilling (but is included)…
(Being a collaboration between Phil Busardo and Dimitris Agrafiotis can't hurt)…
INNOKIN/PLATFORM Z-BIIP Kit - Innokin
..
This pod made me drool - it has everything
It looks nice.
Vape being the subjective monster that it still (thankfully) is though, seems a bit large for a pod. I think I'd probably just opt to grab a mod at that point, but that's not a knock. It's simply my personal preference.
I highly doubt my opinion will negatively impact that all the positive influence it brings. Innokin plus Phil & Dimi should equate to a nice result, and I have no doubt that it's a quality product.
I am waiting for MyVaporStore to get the Blip in, hopefully before the end of the month. They have a 10% off coupon running this month in honor of their 10 year anniversary. The code is TENYEAR in case anyone needs it!
Well...VaporDNA "has" it...but you can't order it...so I guess they don't have it...
Innokin Z-BiiP Pod System – VaporDNA
..
Well DPL...except for the words...is there really any difference between...a Pod Battery with an attached Pod...and a Mod with an attached Tank???
..
Yeah, I still use and like the P80. It just feels so big & heavy after mostly using my Nugget-X or Target mini though.
That Asmodus looks great- nice shot, but quit putting it in bird poop!
(can never find the eewwww! emoji)Shame they don't have gunmetal at your link - it looks fantastic! And it's only a little bit bigger than my Macro. With the rounded edges, it shouldn't really feel bigger unless it's heavy. Probably wouldn't hurt to have another 18650 device for vapocolypse.
Is it easy to mess things up accidentally with the touchscreen, if you're pulling it in and out of a pocket while wrangling your sheep & chickens?
Since the Sinuous P80 thread is now "Closed"...and since it's NOT in the User Manual...P80 QUESTION:
I know Fire Button X3...then LEFT Button...then RIGHT button...will get me into the Current/Puff/Time settings...
But...how can I then set the Puff (counter) or Time (of vaping) to ZERO???
..
Yeah, I still use and like the P80. It just feels so big & heavy after mostly using my Nugget-X or Target mini though.
That Asmodus looks great- nice shot, but quit putting it in bird poop!
Shame they don't have gunmetal at your link - it looks fantastic! And it's only a little bit bigger than my Macro. With the rounded edges, it shouldn't really feel bigger unless it's heavy. Probably wouldn't hurt to have another 18650 device for vapocolypse.
Is it easy to mess things up accidentally with the touchscreen, if you're pulling it in and out of a pocket while wrangling your sheep & chickens?
All my fave mods get their photos taken in bird poop - it's a tradition
And the colossal stays inside - use pods for sheep and chicken work. The screen is locked, so you have to unlock it to change settings.
Try here at Asmodus.com. 30% off, email and ask if they have any gunmetal in stock. Some of the girls got their stab wood mods that way.
asMODus Colossal 80W Box Mod
Otherwise:
asMODus Colossal 80W Touch Screen Box Mod | Vape Device
It is a heavier mod - but that adds to the handfeel. It's just an AWESOME mod
- Status
