Little itty bitty mods under $100.

[tearose50]

A few deals on some of the mods on da spreadsheet posted on the Deals n Steals thread:

http://www.e-cigarette-forum.com/forum/pay-forward-pif/418767-deals-steals-285.html#post15205044

There's a pre-order one for the Aspire ESP too later on the page.

 

[tearose50]

The ESP is on thee spreadsheet. Here's some specs to add:

Product Description
Aspire ESP 30W
Power on and off: Click Fire Button 5 times within 2 seconds to lock or unlock the mod. Variable Wattage: Turn the rotary knob at the top of the mod clockwise or counterclockwise to increase or decrease the output wattage from 5W to 30W for vaping needs. Screen display: The Screen will display the battery power, resistance of atomizer, wattage and voltage. When the atomizer is not detected, the Screen will display “Check atomizer”. When the mod is in low power, the Screen will display “Check battery”.

SPECIFICATIONS:
* 1900mAh LiPo Battery
* 5-30W Adjustable
* Self-Adjusting 510 connections.
* Will fire atomizer resistances as low as 0.30Ω

Weight .30 pounds (5+ ounces)

March 15 estimated release date

 

[billherbst]

The SubTank Mini & Nano tighten up pretty well. It was easy to set the AFC to half the single hole which was about the same as a KFL+. The temperature of the vapor is in direct proportion to the watts dissipating in the coils. To warm/hot? Turn the power down. The OCC heads are easier to rebuild than Kanger BCCs & BDCs. You can rebuild them at practically any resistance you desire. Not having personally tried different builds in the SubTank, I can't offer any specific suggestions.

People are different and have different expectations for the vaping experience. One size does not fit all. If you have the ability to test drive a SubTank at a local B&M, it should answer most of your questions.

On a side note, maybe I'll try to pick up a cheap Aerotank. The newest BDCs look to have potential for rebuilding...

I'm with you, Alden.

I've got an Aspire Atlantis clone on the way from fasttech, along with a pack of ten .5-ohm clone coil heads wicked with OCC (rather than the mystery ceramic Aspire still uses). I don't know how good those clone coils will be, but I plan on rebuilding them anyway with higher resistance coils and rayon wicks.

I've also ordered a Subtank Mini clone from FT, but with no extra heads. The two heads and RTA deck that come with the Mini should be sufficient to hold me for awhile, since I'll rebuild the heads once I get a feel for where my sweet spot is.

I don't need either tank, since I don't direct lung inhale or chase clouds, and I'm happy as a clam with my many Erlkonigin Mini clones. I ordered the Atlantis and Subtank Mini only because, having popped for various higher-wattage boxes---iStick 30s, Cloupor Mini 30s, and an iPV Mini 2 70W---I want to see what all the fuss is about during this extraordinary phase of product explosion in the vaping industry, which actually seems aimed at a relatively small segment of the vaping community.

I'm not retiring any of my lower-wattage gear, however. A modest 1300-mAh Vision Spinner clone armed with an EVOD-style clearo with a rebuilt head---an NR-R-NR coil and cotton or rayon wick---gives a surprisingly flavorful and satisfying vape, easily 80-90% of what all my new toys provide. Shoot, I still test juices by dripping into old-school 510 atties. LOL. The more things change, the more they stay the same.

 

[Katya]

On a side note, maybe I'll try to pick up a cheap Aerotank. The newest BDCs look to have potential for rebuilding...

Actually, I find the older ones easier to rebuild. The new enclosed ones are almost impossible to open... People rebuild the old ones all the time--with two coils, with a single horizontal coil, and single vertical coil.

 

[Katdarling]

The ESP is on thee spreadsheet. Here's some specs to add:

Product Description
Aspire ESP 30W
Power on and off: Click Fire Button 5 times within 2 seconds to lock or unlock the mod. Variable Wattage: Turn the rotary knob at the top of the mod clockwise or counterclockwise to increase or decrease the output wattage from 5W to 30W for vaping needs. Screen display: The Screen will display the battery power, resistance of atomizer, wattage and voltage. When the atomizer is not detected, the Screen will display “Check atomizer”. When the mod is in low power, the Screen will display “Check battery”.

SPECIFICATIONS:
* 1900mAh LiPo Battery
* 5-30W Adjustable
* Self-Adjusting 510 connections.
* Will fire atomizer resistances as low as 0.30Ω

Weight .30 pounds (5+ ounces)

March 15 estimated release date

Thanks, tearose.



UPDATE:

https://docs.google.com/spreadsheets/d/1-z_V674p-5HYa9uzMqj1mq67da8-hnOOh2NNB2-ifgI/edit?usp=sharing

 

[DavidOck]

Anyone else look at those wigs and think about CE4 clearos? Wonder how they wick?

Just have to remember to occasionally lay them on their side and roll 'em...

 

[Fergie]

Hey Kat. Just noticed on the Zero Modz clone 30W, you have it as having a built in battery 2000 mAh. It takes a 18650.

 

[Garemlin]

Our little collection of minis. Vaporshark rDNA 30 and DNA 30, MVP 2, Sigelei Mini 30w and IPV Mini 30w.

Tap'd from my LG G3

 

[Buster282]

I'm adding to my arsenal. Have 2 iSticks 20w, just got a Clouper Mini today and should be getting my iStick 30w tomorrow. I need more hands!

Oh yea, I Sia Betty's sportin a new "do"! Sweet!!

 

[Katdarling]

Hey Kat. Just noticed on the Zero Modz clone 30W, you have it as having a built in battery 2000 mAh. It takes a 18650.

Thanks, Ferguson. I've corrected the error of my ways.

Our little collection of minis. Vaporshark rDNA 30 and DNA 30, MVP 2, Sigelei Mini 30w and IPV Mini 30w.

Tap'd from my LG G3

VERY sweet little collection there, Garemlin! Great pic, too.

I'm adding to my arsenal. Have 2 iSticks 20w, just got a Clouper Mini today and should be getting my iStick 30w tomorrow. I need more hands!

Oh yea, I Sea Betty's sportin a new "do"! Sweet!!

The Betts would kurtsey, but the Sia-do might slip off!

Thanks Buster.

 

[Fergie]

Hey Kat. Just noticed on the Zero Modz clone 30W, you have it as having a built in battery 2000 mAh. It takes a 18650.

Sorry I should have mentioned it's not built in, you can take it out to charge it. Also adjustable 510 (Reverse Thread) & does have USB charging.

 

[Katdarling]

Wonderful. A Sia's work is never done.........




Heading to the KatSheet now.

 

[Fergie]

Wonderful. A Sia's work is never done.........




Heading to the KatSheet now.

Sleep is a good thing

 

[clnire]

Kat I LOVE the new Sia doo avatar! One puff low watt tight draw Sia doo tootle puffer you are ☺

 

[Croak]

Wonderful. A Sia's work is never done.........




Heading to the KatSheet now.

You have an elastic chart.

 

[Buster282]

I just saw that Fastech has the 50w iStick - $48.43 - purple also - woohoo! and the Kanger KBOX 40w only $28.19! Hurry while supplies are lasting!!

 

[jefsview]

I just saw that Fastech has the 50w iStick - $48.43 - purple also - woohoo! and the Kanger KBOX 40w only $28.19! Hurry while supplies are lasting!!

myvaporstore has the Kanger Kbox in stock for $28.99 as well as the 50W iStick for $48.99.. Unless you just like waiting for the slow boat...

 

[Croak]

Nice quick look at the Kbox here:



I have to respect its simplicity, it knows what market it's aiming for, and seems to execute well.

 

[Katdarling]

Nice quick look at the Kbox here:



I have to respect its simplicity, it knows what market it's aiming for, and seems to execute well.

"Lucky guy" <pause, hesitation> "or, uh, lady".

 

[kawboy613]

need to add:

Dovpo Mini 50w
single, exchangable 18650
adjustable 510 (screw or spring?)
83mmx39mmx24mm
ohm: 0.2 - 4.9 ?
magnetic back cover
usb charging
7 - 50watts

still in Beta testing as per VapoRider.....

https://vaporider.net/product/mini-50w-by-dovpo/


this is what i'm looking for next as my wife is constantly stealing my Cloupor mini. (which i have had ZERO problems with, other than not flush fitting atty's)

by the way, i am in NO WAY affiliated with vaporider, i just found this last night surfing but looks good to me, not as small as my Cloupor mini, but still mini, 50w and from the video, YIHI chipped.