Loki Lab Pyrex Tanks and Pro Rings

[pwheeler]

Most times I don't grumble about the USPS. I have never had one lost before. Misdirected? Yes, but it always ended up redirected back to me, so I may wonder about a package, might watch the tracking and be amazed at the way some things come, but it does get here. With the thousands of ECF members, I wonder how many work for the Postal Service, and if so, do they admit it?

Sent by REO vapor

 

[ronnbert]

Most times I don't grumble about the USPS. I have never had one lost before. Misdirected? Yes, but it always ended up redirected back to me, so I may wonder about a package, might watch the tracking and be amazed at the way some things come, but it does get here. With the thousands of ECF members, I wonder how many work for the Postal Service, and if so, do they admit it?

Sent by REO vapor

That is true. I have been fortunate as well and never had one misplaced. I have wondered about some packages taking forever to be sorted, but they always come eventually.

I feel the same way about B&M employees, as they also get a bad rap sometimes around here

 

[RGLP4Lyfe]

That is true. I have been fortunate as well and never had one misplaced. I have wondered about some packages taking forever to be sorted, but they always come eventually.

I feel the same way about B&M employees, as they also get a bad rap sometimes around here

Yeah! Unfortunately my local b&m employees are num-nuts and build custom coils for new comers that are .07 ohms and they sell them a purple efest and send them on their way. That's an accident waiting to happen.. and they truly do believe their efests handle 35 and 40 amps just cause the dang wrapper says so. I've tried to school them and tell them they are 20 amp continuous but they just don't understand and act like I'm the stupid uneducated one. I don't even know why I go in there.. honestly I'll just stop by after work to show off my Reo's because they get so jealous. While their sittin there puffing there 150w Sigelio with some stupid .03 build and drippers with half inch wide airholes hacked into them. AND to boot the employees also use those efest and think their the best. I'm waiting for the day I turn the news channel on and it says local vape shop explosion!! Dang uneducated noobs with jobs at b&ms.
^No disrespect to b&m employees who actually help and have knowledge!!^
-Mark

 

[ronnbert]

Yeah! Unfortunately my local b&m employees are num-nuts and build custom coils for new comers that are .07 ohms and they sell them a purple efest and send them on their way. That's an accident waiting to happen.. and they truly do believe their efests handle 35 and 40 amps just cause the dang wrapper says so. I've tried to school them and tell them they are 20 amp continuous but they just don't understand and act like I'm the stupid uneducated one. I don't even know why I go in there.. honestly I'll just stop by after work to show off my Reo's because they get so jealous. While their sittin there puffing there 150w Sigelio with some stupid .03 build and drippers with half inch wide airholes hacked into them. AND to boot the employees also use those efest and think their the best. I'm waiting for the day I turn the news channel on and it says local vape shop explosion!! Dang uneducated noobs with jobs at b&ms.
^No disrespect to b&m employees who actually help and have knowledge!!^
-Mark

You are talking to one of the educated ones who actually know their stuff and vape safely [emoji6]

I hate B&M employees like that. They give us in the younger crowd a bad rep of being super-sub-ohmers like you described. The only reason I don't hope they have a catastrophic failure is the fact there may be innocent people around them and the bad press would negatively reflect on vaping. I do hope they come to their senses about battery safety though [emoji53]

The lowest I have personally gone is .21 on my VTC5s, and I prefer a .3-.4 build on mechs. Still playing around with my box and finding I am building higher and higher.

To keep this thread at least a little on track, I have been seeing more and more of Loki's gear, and I will definitely be purchasing some once this semester is paid off!

ETA: these Odin bottom feds look nice! Since I have some Peko kits on the way will be looking for some bottom fed attys soon!

 

[PNW Rider]

2 day mail from the republic of Kalifornia really means 4 day mail.


6 day 2nd day mail. Didn't come in today's mail. It's in the state but they won't give it to me on a sunday. It's only when it's something you need that this happens.

Sorry about all this ranting I just can't believe how unlucky I have been in trying to replace my stolen mod. It got stolen in September! Lol I should have bought a cheap drip tip that was wide enough but money is so tight that I couldn't justify the waste.

 

[eratikmind]

Well, if the local Las Vegas USPS folks don't fall asleep, I should have my 3 Router DTs, this evening.

Craig, I trust that things have leveled off and your mother is well. Family is of the highest priority and everything else falls behind. My 85 year old father had his first encounter with a stroke, this past Tuesday. Fortunately, the doctors gave him an IV of TPA within the first hour of the event. The said was able to reverse almost 100% of the stroke.

My father's stroke was a serious course correction and reminder to all of us, of what is truly important and dear to us in our lives.

 

[quincas]

It's really good that it's reversible. Sorry to hear that. Take care eratik.

 

[RGLP4Lyfe]

Got my routers this morning. Pics coming up soon!

 

[RGLP4Lyfe]

You are talking to one of the educated ones who actually know their stuff and vape safely [emoji6]

I hate B&M employees like that. They give us in the younger crowd a bad rep of being super-sub-ohmers like you described. The only reason I don't hope they have a catastrophic failure is the fact there may be innocent people around them and the bad press would negatively reflect on vaping. I do hope they come to their senses about battery safety though [emoji53]

The lowest I have personally gone is .21 on my VTC5s, and I prefer a .3-.4 build on mechs. Still playing around with my box and finding I am building higher and higher.

To keep this thread at least a little on track, I have been seeing more and more of Loki's gear, and I will definitely be purchasing some once this semester is paid off!

ETA: these Odin bottom feds look nice! Since I have some Peko kits on the way will be looking for some bottom fed attys soon!

Yeah I kind of figured you worked at a shop by the way your post was. And I was most def not hating on everyone. Just the shops in my area. And your right it would suck for people to get hurt that weren't involved but it's going to happen. Those boys in that shop are pushing the limits to far just to get more dense clouds. Stupid in.my opinion. Cause my .8 coils probably beat theirs by a long shot. They think it's all about low ohms but it's really about wicking, airflow, placement and how the coils are built. I.E.- Tensioned micro coils for me.

 

[PNW Rider]

Can I EVER get a break? Of course my package arrives in this state on Saturday after mail comes. 6 day, 2nd day mail.

After months, cant this one little package come at least within 2 days of when they said it would? Need to buy my self a punching bag.

 

[ronnbert]

Yeah I kind of figured you worked at a shop by the way your post was. And I was most def not hating on everyone. Just the shops in my area. And your right it would suck for people to get hurt that weren't involved but it's going to happen. Those boys in that shop are pushing the limits to far just to get more dense clouds. Stupid in.my opinion. Cause my .8 coils probably beat theirs by a long shot. They think it's all about low ohms but it's really about wicking, airflow, placement and how the coils are built. I.E.- Tensioned micro coils for me.

No worries I understand you ment no offense except to the guys in your area and others like them.

Pushing the envelope like that is silly, as you said there is so much more involved to vapor production than lower builds. I prefer wrapping around a 3mm screwdriver, so I have huge coils, but few wraps. Easy to wick and feeds juice well.

Rest easy as I took no offense to your post [emoji106]

Staying in the Loki lab realm, are the negative posts integrated into the deck of the Odin? I really like decks like that, it eliminates the possiblity of them spinning.

 

[PNW Rider]

No worries I understand you ment no offense except to the guys in your area and others like them.

Pushing the envelope like that is silly, as you said there is so much more involved to vapor production than lower builds. I prefer wrapping around a 3mm screwdriver, so I have huge coils, but few wraps. Easy to wick and feeds juice well.

Rest easy as I took no offense to your post [emoji106]

Staying in the Loki lab realm, are the negative posts integrated into the deck of the Odin? I really like decks like that, it eliminates the possiblity of them spinning.

They are integrated. Screws screw into the deck itself.


Sent from my iPhone using Tapatalk

 

[RGLP4Lyfe]

Yup you just catch the wire under the edge of the negative screw. There is also little grooves cut under the screws to also help catch the wire and hold it tightly. I can post a pic if ya want.

 

[super_X_drifter]

No worries I understand you ment no offense except to the guys in your area and others like them.

Pushing the envelope like that is silly, as you said there is so much more involved to vapor production than lower builds. I prefer wrapping around a 3mm screwdriver, so I have huge coils, but few wraps. Easy to wick and feeds juice well.

Rest easy as I took no offense to your post [emoji106]

Staying in the Loki lab realm, are the negative posts integrated into the deck of the Odin? I really like decks like that, it eliminates the possiblity of them spinning.

Here - check this out

http://youtu.be/WsirhwmXa3o

This is a very easy atty to build

 

[PNW Rider]

Any ever reamed out the inside of a drip tip with a Dremel?


Sent from my iPhone using Tapatalk

 

[Papa_Lazarou]

Any ever reamed out the inside of a drip tip with a Dremel?


Sent from my iPhone using Tapatalk

Is that code for something

 

[SoCalCraig]

Is that code for something

Lol. I'd like to know too!

As for B&M's... a lot have issues all over. Seen it first hand.

Thanks SuperX for all that you have done with your videos where you share your love of the Odin.

 

[RGLP4Lyfe]

There's the inside neg screw catches. Or check out Russ' video!

 

[PNW Rider]

My drip tip has too small of a mouth and I either inhale juice or dry up wicks fast as ..... Been needing something wider for a long while. No money to buy a temp before the routers came= no funnn
Thought about looking for a Dremel tip to widen it. No sexual puns or double meanings pap.

Sent from my iPhone using Tapatalk

 

[eratikmind]

Thanks, Craig. I received my 3 router drip tips, yesterday afternoon.

Gotta love the finish on them. Two of them are mounted on BF Odins. The 3rd one is sitting in reserve and will be pressed into duty with another Reo/Odin combo when I get it.

The height is perfect for my needs. The bore affords me an excellent draw with my Odins fully open. I am really enjoying the shape and size. Less worries with regard to potentially chipping a front tooth. Thanks for getting these tips out. Now, I may note that I have my perfect Vaping set-up.