Looking for a new RTA suggestion

Status
Not open for further replies.

Poolea77

Full Member
Oct 20, 2015
26
24
48
Ok, so I'm hoping someone might be able to point me in the right direction of my next rta. So, I've tried a few rta's aromamizer, theorum, serpent mini, tornado nano & aromamizer supreme. The aromamizers really have been my favorite so far. At this point I feel like I might want a little more airfow. Any suggestions? I prefer top-fill, juice flow control & velocity deck. Flavor is more important than cloud production. Thank you in advance.
 

lamensterms

Senior Member
ECF Veteran
Dec 28, 2012
221
64
40
Australia
Hey,

Take a look at the Wotofo Sapor RTA. It's a compact tank that comes in 22mm (2ml) & 25mm (3.5-4ml) variants. Top airflow so it is leak resistant. Though the airflow is a bit tighter than the Aromamizer. Sapor has top fill & juice control.

Another candidate could be the iJoy Limitless or Limitless Plus. The Limitless Plus was a bit too airy for me. These are genesis style RTAs, side fill with no juice control.

All the above have velocity style decks.
 

Quantum Mech

Ultra Member
ECF Veteran
Jan 1, 2015
1,202
1,804
UK
this might fit your bill ... AzeRoth CoilArt

aaaa.jpg
 

jersey_emt

Super Member
ECF Veteran
Verified Member
Aug 26, 2009
671
545
44
New Jersey, USA
www.whichgun.com
this might fit your bill ... AzeRoth CoilArt

24 wraps? Even with just 10 wraps, you can start seeing that the outermost wraps aren't vaporizing juice as well as the centermost wraps. Gunk starts building up in the center while the edges are still clean. I remember one time I was vaping on a 16-wrap build with a juice that gunked up coils extremely fast. After going through five or six milliliters of juice, the innermost 6 wraps were caked with gunk, while the outermost wraps on each side were still shiny. With a 24-wrap build, I can't imagine the four or five outermost wraps on each side doing much of anything.
 
  • Like
Reactions: Petabread

Quantum Mech

Ultra Member
ECF Veteran
Jan 1, 2015
1,202
1,804
UK
24 wraps? Even with just 10 wraps, you can start seeing that the outermost wraps aren't vaporizing juice as well as the centermost wraps. Gunk starts building up in the center while the edges are still clean. I remember one time I was vaping on a 16-wrap build with a juice that gunked up coils extremely fast. After going through five or six milliliters of juice, the innermost 6 wraps were caked with gunk, while the outermost wraps on each side were still shiny. With a 24-wrap build, I can't imagine the four or five outermost wraps on each side doing much of anything.
with spaced coils yeah but seems to even out more with touching wraps

this glowed up quite well for the length and have run 2 tank fulls today

flavour n vapour volume have been spot on

I brew my own juice and takes a couple of weeks to start gunging up these sort of coils, but when it does its full length
 
  • Like
Reactions: Petabread

Quantum Mech

Ultra Member
ECF Veteran
Jan 1, 2015
1,202
1,804
UK
Are the screws long enough for big fat wires on the AzeRoth? I was going to get one instead of the Limitless+ but I've heard the screws are too short. Not a big deal to replace them but I'd need to see it to determine the size.

20awg will fit ok maybe 18awg but anything bigger may need some spare screws

20160916_071559.jpg
 
Last edited:

whiteowl84

Unresolved Status
ECF Veteran
Jun 15, 2016
665
996
34
Mage RTA 24mm what moonshot should've been...?

Several people complain about the quality of the machining and fit & finish.
Not just in that thread, I've read on it alot becsuse I want a stubby tank.

I wish RTAs didn't have JFC at all. I have no idea why you'd want to reduce your wicking.

I'd wait for the new Goblin if it isn't already out.
 

Stephen1520

Super Member
ECF Veteran
Verified Member
Oct 10, 2015
391
421
Texas
I own 2 mages and they are the most poorly built tank I own. The colored rings leak for me and the threading is not too good. And both came to me screwed down vise-grip like. Broke one tank because of that. Still I own 2 of them.

Sent from my SAMSUNG-SM-N920A using Tapatalk

Mage RTA 24mm what moonshot should've been...?

Several people complain about the quality of the machining and fit & finish.
Not just in that thread, I've read on it alot becsuse I want a stubby tank.

I wish RTAs didn't have JFC at all. I have no idea why you'd want to reduce your wicking.

I'd wait for the new Goblin if it isn't already out.
Well that all sux! [emoji19]
 

whiteowl84

Unresolved Status
ECF Veteran
Jun 15, 2016
665
996
34
BILLOW V3 plus RTA


VAPE ON[emoji36]
Billow v3, Goblin Mini v3, the whole line of Herakles tanks (v2, Mini/Nano), OBS Crius...theres alot of good tanks to choose from.
If you want a massive deck there's the Cthulhu v3 which is encredibly easy to build and wick.
If you're into gennys the Limitless Plus and AzeRoth seem to be good choices. iJoy is also making an RTA with a big deck and several different options for different decks. If you thought about the Avocado, I'd get the bottom airflow one.
I just got my Limitless yesterday, wicked it and used it. The Cthulhu v3 and Limitless Plus have some of the best flavor you could ask for if you fill the deck with metal.
To test my wicks on the Limitless, I filled it half way and turned it upside-down all night. No leaks. Very nice tank. I love how the smoked glass looks with my black mod.
 

ej1024

Super Member
ECF Veteran
Mar 24, 2014
964
925
usa
Billow v3, Goblin Mini v3, the whole line of Herakles tanks (v2, Mini/Nano), OBS Crius...theres alot of good tanks to choose from.
If you want a massive deck there's the Cthulhu v3 which is encredibly easy to build and wick.
If you're into gennys the Limitless Plus and AzeRoth seem to be good choices. iJoy is also making an RTA with a big deck and several different options for different decks. If you thought about the Avocado, I'd get the bottom airflow one.
I just got my Limitless yesterday, wicked it and used it. The Cthulhu v3 and Limitless Plus have some of the best flavor you could ask for if you fill the deck with metal.
To test my wicks on the Limitless, I filled it half way and turned it upside-down all night. No leaks. Very nice tank. I love how the smoked glass looks with my black mod.

The billow V3plus RTA is a true 25 mm RTA with a juice capacity of 5-6ml
The chutlu sacrificed the juice capacity over deck size...which to me didn't make any sense at all maybe in Europe it does!
The billow v3plus is not as airy like the others but the flavor is really there plus it's not a juice guzzler


VAPE ON[emoji36]
 
  • Like
Reactions: Fozzy71

Fozzy71

Vaping Master
ECF Veteran
Jul 7, 2016
3,370
11,737
54
8 Mile + 2.5
The billow V3plus RTA is a true 25 mm RTA with a juice capacity of 5-6ml
The chutlu sacrificed the juice capacity over deck size...which to me didn't make any sense at all maybe in Europe it does!
The billow v3plus is not as airy like the others but the flavor is really there plus it's not a juice guzzler


VAPE ON[emoji36]
I love my billow v3 plus, re-wicking and washing it for some new juice today. Great flavor, easy to wick with rayon and no leaks. My Boreas is pretty nice too but the deck size is a bit small with the way they designed it to slip into the chamber and then get sealed by the separate bottom cap.
 

whiteowl84

Unresolved Status
ECF Veteran
Jun 15, 2016
665
996
34
Some one had to make an RTA with a big deck.
Every one makes a 6ml tank with a 17mm deck. That's boring...I have a few.
I needed something I could fit fused 24 in.
Even if the thing held 6ml, I'd still need 8 bottles of juice with me everywhere I go.
I'm a coil builder first and a DIY juice man second so naturally I'm going to feel that way.

If people want more capacity and a little deck, theres a plethora of options for them.
 
Status
Not open for further replies.

Users who are viewing this thread