LOOSEST DRAW stock atty or carto? or e-cig kit?

[blackjackel]

I am looking for the absolute loosest draw possible. I don't even want to feel like I'm taking a drag (if possible) I want it to be like I'm just inhaling like I'm breathing normally... like there's NO suction or effort required to suck the vapor out of the e-cig.

I did buy the 801 kit which was recommended but the draw isn't loose enough stock, The atty by itself without a cartridge or battery does seem pretty loose though.

 

[t9c]

Other than the one successfully debridged 510 I've managed, I think the Cisco LR510 (1.5ohm) is the easiest draw I've tried from my limited experience.

 

[cappadoc]

801 are the tightest, followed by 901 with 510 being loosest draw IMHO. Any 510, especially over 4V, will be WAY easier than 801. I LOVE the 801 flavor, though.

 

[beetlespin]

510 with a mod. I'm using 510 with 5v tekk mod it very loose draw. Ego won't fit the bill the cone helps on the draw. You could try 801 adpoter to 510 atty that might work well be the cheapest route.

 

[Hotwire]

I know you don't have a 510 kit but the janty ego xl carto has a heavenly draw, utterly heavenly.

 

[blackjackel]

I know you don't have a 510 kit but the janty ego xl carto has a heavenly draw, utterly heavenly.

Heavenly means loose to you? Have you tried the 501's that people recommended?

 

[Hotwire]

Heavenly means loose to you? Have you tried the 501's that people recommended?

Yes, if the draw was otherwise, I wouldn't have reccomended it to you, seeing as you're looking for a loose draw. It also holds 1.8ml and I've yet to get a bad hit off it after a cpl weeks of use.

The Janty XL Carto is a 510 fit. There are no 501's - unless you're wearing jeans... ;P