Mad Murdock's radiator Pluid

Status
Not open for further replies.

apexoflight

Senior Member
ECF Veteran
Verified Member
Sep 1, 2012
183
329
40
Newport News, VA, United States
ok lol as i keep screwing with this thing i notice im getting faster at making good working coils so woot for that lol just did a 4 wrap and i think that may be the sweet spot but im so over nic'd from juice on my hands and tying to vape it to the right flavor i may have just killed my tongue guess i should go sleep it off but i got some numbness from that last bit. now to get that coil seasoned and i may be in business. the other thing may be that im so used to that heat from the .357 that i need to get used to the fact that im prob not going to get that and im ok with that so long as i get the flavor. these rba's are a tricky thing but i hear once you get it right there great
 

ukeman

PV Masher
Supporting Member
ECF Veteran
Verified Member
Aug 22, 2010
7,718
5,129
Kauai, Hawaii
I agree that juice like Pluid, (or any juice for that matter), is almost wasted on a conventional atomizer.
Its GOT TO BE an rba
- or an HH357, which is a "hybrid" 306/510 and special design...

I also am pretty happy with a couple of other Hybrid atomizers... Aero and AMG designed like 357, but mass produced... close in flavor and freaking user friendly. I invariably kill my HH357's in a week, 'cause i like to keep em slightly dry so i stock up on the other hybrids. atomizers.

I use a LR 1.5 hybrid with my Provari anywhere from 2.9v to 3.8v, and my Spheroid at 9.5w on Zmax.
With dripping, Pluid, its the first few hits that are killer...
 

apexoflight

Senior Member
ECF Veteran
Verified Member
Sep 1, 2012
183
329
40
Newport News, VA, United States
I agree that juice like Pluid, (or any juice for that matter), is almost wasted on a conventional atomizer.
Its GOT TO BE an rba
- or an HH357, which is a "hybrid" 306/510 and special design...

I also am pretty happy with a couple of other Hybrid atomizers... Aero and AMG designed like 357, but mass produced... close in flavor and freaking user friendly. I invariably kill my HH357's in a week, 'cause i like to keep em slightly dry so i stock up on the other hybrids. atomizers.

I use a LR 1.5 hybrid with my Provari anywhere from 2.9v to 3.8v, and my Spheroid at 9.5w on Zmax.
With dripping, Pluid, its the first few hits that are killer...

i will say the lavagen is a great little rba. I found it very easy to set it up and im using the reactor end caps and bedazzle tube. Its more user error i think as far as my pluid is going in it but i think im getting close and seeing as i only have a lambo mini and a silver bullet with a kick which is my preferred way to use my lavagen i will get it to where it needs to be.It has delivered vapor and throat hit every time!
 

Vapor2112

Atty Baller - Level 2
ECF Veteran
Verified Member
Apr 8, 2010
3,162
4,603
Virgin-ia
I use...... This.....

MDwGn.jpg


ok so what does everyone use to get the best flavor from there pluid? im using my lavagen and its ok but i get so much more flavor from my 2ohm hh.357 i am using 500 mesh and 30ga kanthol i have been doing 5 wraps and it puts the coil kind of in a central location but i just set it up wit 7 wraps just for s!@#'s and giggles and its even less but its spread out alot more. also im using it on my silver bullet with a kick set to 8.5 watts any pointers
 

Monoxxide

Super Member
ECF Veteran
Verified Member
Apr 10, 2012
498
1,294
Belgium
ok so what does everyone use to get the best flavor from there pluid? im using my lavagen and its ok but i get so much more flavor from my 2ohm hh.357 i am using 500 mesh and 30ga kanthol i have been doing 5 wraps and it puts the coil kind of in a central location but i just set it up wit 7 wraps just for s!@#'s and giggles and its even less but its spread out alot more. also im using it on my silver bullet with a kick set to 8.5 watts any pointers

On the caravela i use a 2/3 wrap 30awg, on the vari's a 4/5 wrap 30awg, all with 500mesh. I realy like the caravela setup with a fresh battery. Its for those moments when you realy want a slap in the face vape.
 

ssearls11

Super Member
ECF Veteran
Verified Member
Jun 20, 2012
357
213
43
Houston, TX
If there are any of you who have been kicking around the idea of a iHybrid I did a unpack/setup review here iHybrid by Faceless - E-Cigarette Review's, Tips, and Tricks
I really like it.
I am now running a 32 kanthal twisted 4/3 1.5 ohm in it on 500 mesh and it rocks
nice review and setup....I didn't even bother emailing 310 with my scuffed up 350...I actually emailed them when I originally ordered my gunmetal and never got a response from them so I figured why bother.



Sent from the cab of a x-ray rig bored out of my mind!
 

Murdock Ruml

Supplier's Manufacturer - Offline
ECF Veteran
Jun 19, 2010
3,703
5,972
Alaska
Lol so I guess that means I can't come hang out?

It's a beautiful glass! It looks to be made of diamond. I instantly knew it had the perfect cut, so it has to be a Leo.

How bout now :D

Your welcome to come hang out, but I might have this bottle polished off before you get here. It's a long drive to Alaska.
 

TMC81614

Unregistered Supplier
ECF Veteran
Jul 3, 2011
77
101
51
Raleigh, NC. USA
www.vapingwatch.com
Nah. I've got a helicopter. On my way... I'm bringing some empty Pluid bottles with me. You've got to get drunk enough so that I can have you fill these back up. Do you think agent orange will still taste great in a bottle that smells like Pluid?

Lemme answer that for MR.

Ummmmmmmmmm how bout YES!!!
 

Murdock Ruml

Supplier's Manufacturer - Offline
ECF Veteran
Jun 19, 2010
3,703
5,972
Alaska
Nah. I've got a helicopter. On my way... I'm bringing some empty Pluid bottles with me. You've got to get drunk enough so that I can have you fill these back up. Do you think agent orange will still taste great in a bottle that smells like Pluid?

The largest helicopter can fly 745 miles without refueling. Good luck.
 
Status
Not open for further replies.

Users who are viewing this thread