Magic Coil wire/Bakero wire Trying to figure this out

[Jimmyhat]

^^ exactly, I also am starting to think it's a scam, if you go into a humid room with a great vaping gennie you can easily put out the plumes he is. But who knows he might have something, however to me it's not worth it especially since he refuses to say what the chemical compostiion of the wire is.

 

[gdeal]

Take your genny in the bathroom, steam up the shower a bit, use VG only juice, place a light just behind you and off to the side. vape into the light and take a video.

Its magic.

I don't think he is scamming yet, he is just trying to build hype around something that people just dont know is readily available. Well...call that what ever it is...

 

[mikepointfive]

Take your genny in the bathroom, steam up the shower a bit, use VG only juice, place a light just behind you and off to the side. Vape into the light and take a video.

Its magic.

I don't think he is scamming yet, he is just trying to build hype around something that people just dont know is readily available. Well...call that what ever it is...

Here is a recent video.

no fancy lighting. no steamy room. no 100% VG. no bakero wire. Its all in the build here and im using a single coil with 3x twisted 30ga in my A7 rebuildable on an Nzonic mecha mod. really.. you people swear im conspiring here.

 

[gdeal]

Here is a recent video.

no fancy lighting. no steamy room. no 100% VG. no bakero wire. Its all in the build here and im using a single coil with 3x twisted 30ga in my A7 rebuildable on an Nzonic mecha mod. really.. you people swear im conspiring here.

Nice vapor!

What are the ohms on that coil? Triple twisted 30g is like using 25g wire. Better yet...how about sharing a picture of the coil/ wick set-up?

I agree, there is no magic, its all in the build.

 

[Jimmyhat]

Here is a recent video.

no fancy lighting. no steamy room. no 100% VG. no bakero wire. Its all in the build here and im using a single coil with 3x twisted 30ga in my A7 rebuildable on an Nzonic mecha mod. really.. you people swear im conspiring here.

I agree gdeal. And I know my next coil setup, I've been doing twisted 28ga and it's good with vapor but not like this^^

 

[mikepointfive]

=) thanks guys.. really im a cloud chaser not a $ chaser.. pics of my build coming up!

 

[mikepointfive]

alright.. well i been using this build for a while now so its a bit used, but i torched it all clean and photoed it the best i could.

you can see that its a bit tattered by time but i probably wont worry about changing it until i either pop a coil or get my hands on some ribbon wire.. its a 2/3 wrap on 4 pieces of 3ga silica. I twist my wire with a dremel for nice even twists and i use a pair of 16340 batteries to power it.. this is a special set i got just for this purpose. it starts out a bit hot but after the roll off it levels out and i can take a nice long vape. i think that the key factor in my increased output is my increased input aka more air flow. ive drilled 2 2mm holes in my A7 and my nimbus as well and both are making huge clouds.

 

[gdeal]

Pics are great. Thanks for sharing that. When you said "3ga silica" did you mean 3mm silica strands? Also what is the resistance of that coil? You must be around .4 to .6 ohms.

 

[st0nedpenguin]

You're running a sub 1ohm coil with stacked batteries?

 

[Jimmyhat]

Nice mikepointfive, I did your 3x 30ga on my ihybrid on unoxidized mesh and it works pretty good. I feel like you guys running silica are getting much better vapor than the gennie guys are

 

[mikepointfive]

well the big vapor is all about low ohms, airflow, and juice flow. make sure your wicking with a straw type wick, and remember that the thinner the walls on you wick, the bigger the straw hole will be. I've seen some really cool hybrid u-wicks too. do you have a genny that allows for u-wicks?

Nice mikepointfive, I did your 3x 30ga on my ihybrid on unoxidized mesh and it works pretty good. I feel like you guys running silica are getting much better vapor than the gennie guys are

 

[mikepointfive]

crap!! i just went to check my ohms and realized that I left my ohm reader @ my local B&M - The Vapor Loft. and i dont have any VV mods.. let alone ones w/ ohm meters =] strictly mech here!

Pics are great. Thanks for sharing that. When you said "3ga silica" did you mean 3mm silica strands? Also what is the resistance of that coil? You must be around .4 to .6 ohms.

 

[mikepointfive]

And StonedPenguin, to answer your question. yes. on a .2 ohm coil and full batteries im rippin 352.8 watts!! scary huh!? my trick is i just tap the button, feather it if you will. hits can be intense if you hold the button too long but once the full batteries roll off to about 3.7 i get a nice rich vape. thats what im doing in the video. at that point the batteries had leveled off.. and yes I am aware of the risks i take by stacking batteries. This is a dedicated pair only used together and charged together. theyre never used other than as a pair.

 

[StaircaseWit]

Man I see this ending badly...

Not necessarily for you, mikepointfive, but for people who read that and decide it's a good idea.

 

[mikepointfive]

Man I see this ending badly...

Not necessarily for you, mikepointfive, but for people who read that and decide it's a good idea.

I hear you brother.. but hopefully people utilize this vast resource and educate themselves thoroughly before jumping into risky territory.

 

[meatsneakers]

Do us a solid - when that mod with 16340's, pushing over "352w" blows a chunk of your face off, tell your family to tell the hospital that you fell off a roof. Because all we need now is the media thinking this is normal and not the dumbest thing I've seen on this forum.

 

[mikepointfive]

Do us a solid - when that mod with 16340's, pushing over "352w" blows a chunk of your face off, tell your family to tell the hospital that you fell off a roof. Because all we need now is the media thinking this is normal and not the dumbest thing I've seen on this forum.

sure thing bro.

 

[tim_man]

that's some intense vapor. Love to get something similar under safer conditions. There's gotta be a way

 

[beanpusher]

that's some intense vapor. Love to get something similar under safer conditions. There's gotta be a way

i run at .7-.8 ohms and get ridiculous amounts of vapor with a cool throat hit on some 12mg on a rda octopus purely mechanical ofcourse.

 

[beanpusher]

alright.. well i been using this build for a while now so its a bit used, but i torched it all clean and photoed it the best i could.

you can see that its a bit tattered by time but i probably wont worry about changing it until i either pop a coil or get my hands on some ribbon wire.. its a 2/3 wrap on 4 pieces of 3ga silica. I twist my wire with a dremel for nice even twists and i use a pair of 16340 batteries to power it.. this is a special set i got just for this purpose. it starts out a bit hot but after the roll off it levels out and i can take a nice long vape. i think that the key factor in my increased output is my increased input aka more air flow. ive drilled 2 2mm holes in my A7 and my nimbus as well and both are making huge clouds.

i love that nzonic. pinoy ka ba?