Mark-T Infinity Atomizer
- Thread starter mark78
- Start date
- th_trl_thread_readers 0
- Status
I was interested at first but looking at it, it doesn't appeal hope it goes well for you Mark
Last edited:
That shouldn't be too hard for someone with the tools to actually make something like this... I am picturing the atty being about 0.25" longer, with the extra space at the base of the atomizer, just above the threads. Have a 0.25" section threaded with air holes there instead of the connector. Have a thin nut threaded onto that section. Turn the nut clockwise to cover the airholes and tighten the draw, counterclockwise to uncover and loosen the draw. Basically a smaller version of the UFS air control, built into the bottom section of the atomizer.
They already have the mechanism at the base of bunsen burners and propane torches... I was thinking something more like a set screw though.
If anyone decides to use this idea a free unit is payment enough =)
If anyone decides to use this idea a free unit is payment enough =)
NOw you're talking! Yes!
This could be a deal maker/breaker... when someone see's "rebuildable" their eyes pop open wide, but when you get it, it better work good like people expect or forget it. I'd rather spend $100 + on bulk paks of disposables; after all, we are looking for the "best vape available", and there's a lot of money to play with when you figure how much we spent on analogs!
This could be a deal maker/breaker... when someone see's "rebuildable" their eyes pop open wide, but when you get it, it better work good like people expect or forget it. I'd rather spend $100 + on bulk paks of disposables; after all, we are looking for the "best vape available", and there's a lot of money to play with when you figure how much we spent on analogs!
I was just looking at the bulli and this is far more compelling. Can someone catch me up? 
I am primarily an Ego tank and vapemate/dripper, so this seems perfect. Am I correct that this comes with sleeves/adapters so it can do both? Will it be 510 drip tip compatible in "drip mode"? Does this use a regular Ego-T type B tank in "tank mode"?
For any of the beta testers (I assume there were as that seems to be SOP) any wicking issues in tank mode? While dripping, is there any leak/over drip protection?
Thanks!
Edit: Cloud 9 is the first (and only) distribution channel for this, is that right?
I am primarily an Ego tank and vapemate/dripper, so this seems perfect. Am I correct that this comes with sleeves/adapters so it can do both? Will it be 510 drip tip compatible in "drip mode"? Does this use a regular Ego-T type B tank in "tank mode"?
For any of the beta testers (I assume there were as that seems to be SOP) any wicking issues in tank mode? While dripping, is there any leak/over drip protection?
Thanks!
Edit: Cloud 9 is the first (and only) distribution channel for this, is that right?
Last edited:
hehehehe, I was working as usual, Wingapo. The weekend's orders don't get out on time unless we start processing them on Sunday.
I was just looking at the bulli and this is far more compelling. Can someone catch me up?
I am primarily an Ego tank and vapemate/dripper, so this seems perfect. Am I correct that this comes with sleeves/adapters so it can do both? Will it be 510 drip tip compatible in "drip mode"? Does this use a regular Ego-T type B tank in "tank mode"?
For any of the beta testers (I assume there were as that seems to be SOP) any wicking issues in tank mode? While dripping, is there any leak/over drip protection?
Thanks!
Edit: Cloud 9 is the first (and only) distribution channel for this, is that right?
Hi vocr - Yes, all the bits are included for you to drip with the included drip tip, or other 510/901 drip tip, or indeed the VapeMate.
It uses a regular cone shaped (Type A) tank in tank mode. You can tailor the wick in tank mode so that it works well for your own vaping style and type of juice. It comes with SS mesh installed in there but you can use wick of any kind and we encourage experimentation to find what suits you best.
Mark will continue to retail within Romania only and the rest of the world will be indeed be supplied by Cloud9Vaping.
hehehe, sorry if anyone was worried by my absence in this thread, not tired of anything, just not enough hours in the day.
I WILL be getting one of these.
EVEN THOUGH I was thoroughly P.O'd about the Precious.......
EVEN THOUGH I was thoroughly P.O'd about the Precious.......
Thanks Lisaf01! So its definitely the Type A (1.2ml) tanks it uses? I was hoping for the Type B (2ml), I wonder if that is in the pipeline like it was for the bulli? I would guess it would just need a wider adapter.
Hiya Vocr, yes, it's definitely just the smaller cone shaped carts at the moment, for neatness.
Mark may well look at the larger carts in the future, but at the moment he's just concentrating on getting this first batch to me so that all you guys can have a change to get one as soon as possible.
Mark may well look at the larger carts in the future, but at the moment he's just concentrating on getting this first batch to me so that all you guys can have a change to get one as soon as possible.
+++++++++++++10 for Cloud9 as only supplier of the MarkT - no chasing to and fro to different sites.
hehehehe, I was working as usual, Wingapo. The weekend's orders don't get out on time unless we start processing them on Sunday.
Hi vocr - Yes, all the bits are included for you to drip with the included drip tip, or other 510/901 drip tip, or indeed the VapeMate.
It uses a regular cone shaped (Type A) tank in tank mode. You can tailor the wick in tank mode so that it works well for your own vaping style and type of juice. It comes with SS mesh installed in there but you can use wick of any kind and we encourage experimentation to find what suits you best.
Mark will continue to retail within Romania only and the rest of the world will be indeed be supplied by Cloud9Vaping.
- Status
Similar threads
- Locked
