The costs of running this huge site are paid for by ads. Please consider registering and becoming a Supporting Member for an ad-free experience. Thanks, ECF team.

Mech mod fire button at ground. Need to be amperage rated ??

Discussion in 'Ask The Veterans' started by HootOwl, Aug 13, 2016.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. HootOwl

    HootOwl Senior Member ECF Veteran

    Apr 9, 2016
    Indiana
    I would like to replace the fire button/switch on a Gizmo mechanical mod with a clicky tactile switch. The mod is aluminum and the 510 connector is grounded to this 'frame'. The fire button just connects NEG battery post to the frame to complete circuit and fire the atomizer.Single 18650, and I only vape MTL nothing close to sub-ohm.

    Since this is on the ground side, would a tiny tactile switch with low amperage rating work?
     
  2. DavidOck

    DavidOck ECF Guru ECF Veteran

    Supporting member
    The switch is a component of a series circuit. It will need to be rated at or above the max current you will ever see. Unless you want it to act as a fuse, I'd not recommend any "low amperage rating" switch.
     
    • Like Like x 3
Thread Status:
Not open for further replies.

Share This Page