I have the "3D" and loving it so I want to run it in hybred mode but the threading doesn't match my chi you. It is 20/0.5 thread I think ( same thread as a nemesis I believe) my problem is I hate crunchy switches, I like ones that are buttery with a short throw, I don't like recessed buttons ether. And suggestions?
mech mod with 20/0.5 thread for "3D" in hybrid mode?
- Thread starter hiizombii
- Start date
- th_trl_thread_readers 0
- Status
The Nanos has the same threading. You probably have to shorten the 3D positive pin to make it thread all the way down, tho. Guessing the Poldiac could work too, but never seen one in person.
Also check
https://www.fasttech.com/forums/vapers/t/1213200/mod-and-atomizer-list-by-threading
Spoiler:
M20.5 x 0.5
Atmomixani Nemesis (Tubes)
UD UDT-V12 (Tubes)
https://www.fasttech.com/forums/vapers/t/1213200/mod-and-atomizer-list-by-threading
Spoiler:
M20.5 x 0.5
Atmomixani Nemesis (Tubes)
UD UDT-V12 (Tubes)
I saw a thread here with a great link to a list of mechs and the thread size at both the top cap and switch ends. Wanted to bookmark it. Didn't 
But I know it exists. Hopefully someone someone more organized than me can provide it considering how useful the info is. And this time I'll bookmark the link!
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
But I know it exists. Hopefully someone someone more organized than me can provide it considering how useful the info is. And this time I'll bookmark the link!
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
Consider buying an authentic nemesis.
As an owner of 3 full size and 1 mini...i can say the switch is anything BUT crunchy. The crunchy switch issue is literally only a problem on clones.
Which is why i dont do clones. The authentic switch IS buttery smooth.
Like new authentics can be had on the classies or 100-150
As an owner of 3 full size and 1 mini...i can say the switch is anything BUT crunchy. The crunchy switch issue is literally only a problem on clones.
Which is why i dont do clones. The authentic switch IS buttery smooth.
Like new authentics can be had on the classies or 100-150
Not accurate at all. I work on and repair mods at my local vape shop
Switches are almost identical. Same switch design, same crunchy issues on both.
Not all clones are crunchy, and not all legit ones are either.
Maybe you should try a clone. They really are 1:1.
Buying a legit Nemmy will not guarantee a crunch free switch.
Yea and in a rather Belligerent Asinine manor using Fiction rather than fact to make a point.
Sorry to inform - Threads, even on ECH have been started asking for help with Crunchy Switches on Originals.
Now............... I have 9 Clones and only (1), ONE, UNO has as very very slightly crunchy switch. Even this one WAS MY fault. I used it before checking and cleaning. In doing so, I scored the center Bore.
My 3 Brass have almost undetectable movement and I have to be careful holding one and getting distracted. I've caught myself firine the mod without realizing.
Back on topic - isn't that 3D version for the 69 Mod?
Last edited:
Yea i haven't found ether authentic or clones around here that are good except for one clone tree of life, may get It. But I was planing on a fasttech order for one
Sent from my Nexus 5 using Tapatalk
Sent from my Nexus 5 using Tapatalk
I am using a 3D clone dripper on one of my Poldiacs at the present time. I removed the top cap and the 510 positive screw from the Poldiac. I then screwed a "beauty ring" from a Nemesis clone on the top of the Poldiac switch head and screwed the 3D into this beauty ring. The center pin on the 3D has to be fully screwed all the way tight for this setup to fit correctly.
Looks and works great.
Looks and works great.
FastTech sells the same product as Infinite. That is both are manufactured by the same company and sold by both FastTech and Infinite but the FastTech price is cheaper. If you're willing to wait, save the money with a FastTech order.
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
- Status
