Which Janty Stick type will you be getting?

  • Automatic

  • Manual


Results are only viewable after voting.
Status
Not open for further replies.

dumwaldo

Super Member
ECF Veteran
Apr 6, 2009
949
10
New York
Waldo, the confusion arose (for me and some others I'm aware of) because the instructions said that the + goes at the top, and the top of the Stick, I thought, is its nose :( It only took a second to realise something was wrong, it sizzles as soon as you start to wind in the screw.

scylla

Don't take it personal. I was just feeling.... I believe the word you brits use for it is 'sarky'.

Incidentally, from the way my Stick performs I do not think there is such a thing as passthrough mode. Mine runs off the battery every time I take a puff and I can tell because when it is fully charged and plugged in, I take a puff and the red charging light comes on.

What that tells me is that my drag used the battery power and the charger is kicking in the instant I stop so it can replenish the bit of battery power the puff used up.

DW
 

dumwaldo

Super Member
ECF Veteran
Apr 6, 2009
949
10
New York
Thanks for the info. I'm using the TAWA atomiser, because it will be easier to remove/replace if I have to clean it. That's what I'm getting the burny taste thru but I think it's getting better :)

scylla
What the crap!!!

JantyUSA must be the lowest rung of the Janty ladder. I read what you posted as was like how the heck is she using a TAWA atomizer? I thought they were not out yet?

Checked Ivapour and there they were...

Checked JantyUSA and nothing :-x

Can you see any physical difference between these and regular KBC atomizers like the one that came with the stick?

DW
 

Kate51

Vaping Master
ECF Veteran
Mar 27, 2009
3,031
22
78
Argyle Wi USA
I have an auto Stick...for some reason, it keeps cutting off after about 2-3 seconds, with a distinct little POP. Sometimes I have to pull, then pull again to get the blue light to show heating, then it "pops" off in a couple seconds. Have not been able to pull long enough to change it to red. Just for the heck of it, I took the atty out and blew it out, pretty hard, and got 5-6 drops of juice to drip out. What am I doing wrong.....I looked for that Manual (NOOBIE HANDBOOK) but couldn't find it back. Battery fully charged (wall plug charger), yah, atty all the way in. Vapor, not so much.
Thanks, Kate

A P.S. This morning I fired it up, seems to be working more normally today, still have to use two pulls to get it burning right, but maybe that's in the electronics, I have no idea...maybe the atty was more flooded that I thought. I blew it out and put it up for the night, so could be..? Have forwarded this to J/USA, with a little add-on order THANKS
 
Last edited:

scyllabub

Super Member
ECF Veteran
Oct 27, 2008
474
1
London, UK
You're too funny DW - it's "snarky".
I may be missing your joke, Mamu, I'm good at that, but "sarky" is what it is. Short for "sarcastic".

Yes, Waldo, I assume that the USB power is topping up (oooOOOoooh, just realised you said "replenish", how educated ;) ) the battery every time you take a puff, so I suppose it shouldn't be called "passthrough"? I don't mind though :) Maybe it should be called "like passthrough", like "Like Smoke" :D

My Stick's performance continues to improve, yippee :D It's been a bit of a worry *whimper*.

scylla :)
 

scyllabub

Super Member
ECF Veteran
Oct 27, 2008
474
1
London, UK
Yes, Waldo, they appear slimmer and are easier to insert - I still have difficulty with the screw-in though, but that's me. I was very pleased to see that your video showed the wobble-click and I assumed you were using a TAWA because the atomiser I got with the Stick was very tight indeed. Don't ask me to put it back in and test it, I just couldn't.

Listening to my click, I wondered if it was the screw assembly built into the Stick's body that was causing it.

Somehow, that post of yours doesn't look as educated as the other one, Waldo dear ;)

scylla :)
 

mamu

Ultra Member
ECF Veteran
Verified Member
Mar 29, 2009
2,551
1,523
IN USA
I may be missing your joke, Mamu, I'm good at that, but "sarky" is what it is. Short for "sarcastic".

Yeah... I know "sarky" is "sarcastic".

I thought DW's post were more "snarky" than "sarky" though. That's why I thought it was too funny that he would say he was being "sarky".

Maybe it's more like a sarkysnark.

But he seems to be a good boy now that he's got his stick. You know, sort of mellowed out a bit.

I'm proud of you DW - now be a good boy and don't push anybody's buttons for a while hahaha!
 

steven.rn

Super Member
ECF Veteran
May 1, 2009
503
48
Ohio
Hrumph. Day 4 with no "daily update". Mod should rename that thread "sporadic update". Of course, there are a threads in other forums named "daily stock update" or such that follow the same pattern. I realize it's a PITA to do, so I don't care if you actually do a daily update or not. Just don't SAY you're gonna do one.

Then you'd get the steven.rn thumbs up- and not the one I glove for in the standard exam ;-)

Steve
 

steven.rn

Super Member
ECF Veteran
May 1, 2009
503
48
Ohio
I have an 801 atomizer from MVS and it does not fit. What did you use to get in? Vaseline lol lol

All the spare attys that I got from David Yang at Eastmall work just fine. Initially, they are a bit snug, just like the Janty atty, but they seem to be OK once you get past the first 1/2 inch or so.:thumb:


Man. I can't believe these two posts got through 'til today without Elendil posting some kind of great joke word play on the two taken out of context. What a setup :p
 

Cellmeister

Ultra Member
ECF Veteran
Jan 3, 2009
1,012
4
Beantown, USA
I Forgot To Post The Slide On Slide Off Cap For The Stick.

Heres The Pimped Mod Cap On The Stick:

2425d1243902416-pimp-my-janty-stick-mods-cellmeister_jmcf1_cap3_img_0046.jpg


~Keep Vapin~!
 

Ethan_Janty

Super Member
ECF Veteran
Jul 3, 2008
453
0
Fort Worth
Hrumph. Day 4 with no "daily update". Mod should rename that thread "sporadic update". Of course, there are a threads in other forums named "daily stock update" or such that follow the same pattern. I realize it's a PITA to do, so I don't care if you actually do a daily update or not. Just don't SAY you're gonna do one.

Then you'd get the steven.rn thumbs up- and not the one I glove for in the standard exam ;-)

Steve

Well, I apologize guys, generally updates mean that I have news. As of today, I still don't have any. Seeing how the ***Janty Stick Daily update*** thread has taken a life of its own, I figure that any update would simply be lost among the posts. As of 11:06 AM CST, no sticks today. That's why I created the ***Order numbers shipped*** thread.
 

BiteMe

Ultra Member
ECF Veteran
Mar 31, 2009
1,431
2
Stanwood, WA
Well, I apologize guys, generally updates mean that I have news. As of today, I still don't have any. Seeing how the ***Janty Stick Daily update*** thread has taken a life of its own, I figure that any update would simply be lost among the posts. As of 11:06 AM CST, no sticks today. That's why I created the ***Order numbers shipped*** thread.

I just hate it when Ethans logic over rules my emotion!!!

(tee-hee!!!):D
 

Ethan_Janty

Super Member
ECF Veteran
Jul 3, 2008
453
0
Fort Worth
Hey all,
Well, as of 11:08 AM CST, we STILL haven't received the sticks yet. I know it's not the news you were hoping for, but it's the only news I have at this point. :(

I'll let you all know what happens, if they come in towards the end of the day, I'll let you know. If not, then I will not be giving an update.

ALSO, Jantymod, aka Ethan, aka Neo will be unavailable for the rest of the week as I am preparing for a very important test. I will try to check in from time to time, but I would appreciate it if you could shoot your emails to Jeff so they can be answered in a timely manner, info@jantyusa.com. I will be back next Monday. SO, please send all PMs to the email address above, as I will not be able to respond to most questions as I will not be in the office.

Ethan
 

Ethan_Janty

Super Member
ECF Veteran
Jul 3, 2008
453
0
Fort Worth
Well, according to the tracking information that we have on the Dura-C sets, they are "in transit" which means that they could arrive this afternoon, or tomorrow morning. I'm hoping for this afternoon; however, I've learned that the postal service is sketchy at best. lol..Anyhow, that's the news that I have for today folks.

Ethan
 

BiteMe

Ultra Member
ECF Veteran
Mar 31, 2009
1,431
2
Stanwood, WA
Thanks guys anyone else have both the 510 and the stick?

I've got a Dura-C and a manual Stick. I've got to agree with others here that the Dura (510) produces a better flavor taste than any 801 based PV. That having been said, the Stick has, hands down, the best battery life of anything that I have! It doesn't have the throat hit that the Dura has, but the vapor is cooler, and there seems to be more of it. The capacity of the 801 carts is also much greater than the Dura, so I'm not refilling as often.
I've also got the auto version L.E. Stick on order, and I can't wait to see how that stacks up to the manual version. I have to add that I was dissapointed with my Kiss Box while using the auto switch. It seemed to cut out much sooner than I wanted and I had to take a much harder hit than with the Dura (using the auto batteries) to get any kind of vapor production. I certainly hope that the stick doesn't experience the same type problem.
I'll let you know how everything compares once I get the L.E.:rolleyes:
 

ladyraj

Super Member
ECF Veteran
Apr 30, 2009
981
8
Cincinnati, Ohio
Hey all,
Well, as of 11:08 AM CST, we STILL haven't received the sticks yet. I know it's not the news you were hoping for, but it's the only news I have at this point. :(

I'll let you all know what happens, if they come in towards the end of the day, I'll let you know. If not, then I will not be giving an update.

ALSO, Jantymod, aka Ethan, aka Neo will be unavailable for the rest of the week as I am preparing for a very important test. I will try to check in from time to time, but I would appreciate it if you could shoot your emails to Jeff so they can be answered in a timely manner, info@jantyusa.com. I will be back next Monday. SO, please send all PMs to the email address above, as I will not be able to respond to most questions as I will not be in the office.

Ethan

Good luck with your test!
 
Status
Not open for further replies.

Users who are viewing this thread