no dental pick? but that's a must-have tool for any vaper! excellent for raising a 510 center pin!
Last edited:
Mike n Tibs DNA Mods!
- Thread starter Proetus
- Start date
- th_trl_thread_readers 0
- Status
no dental pick? but that's a must-have tool for any vaper! excellent for raising a 510 center pin!
You fish with crazy stuff. I use hooks and worms.
I use fish sticks...not so much with the worms though
Pics (of you fishin with those things) or it never happened
Huh, never have taken a pic fishing. Fished a wire into a smoke detector in a basement today....but I must have been dreaming since I didn't take a pic lol. Might have to fish a thermostat wire tomorrow and will try to remember.
Much better to see your energetic instead of that screaming thingimabob you had.
I caught a lot of 10-2 and 12-2 and it was tough fishing, old half lap walls full of loose blow in insulation. When we first bought "this old house" I was tracking down where all the wires ran from the unmarked breakers. In the cellar I was running my hand along a line in the rafters when I came to a big knot of a taped junction, someone had tapped 110 off a 220 line and it was warm to the touch, I turned that breaker off and the next day starting running all new lines through the entire house, and it's a biggggg house. I just wouldn't have been able to sleep nights until I was sure my family wasn't going to wake up to a fire in the middle of the night.
My RMA'ed chip came yesterday I have everything I need now to build my Faux Beta Box
On another note My SX350j chip malfunctioned, the battery gauge stopped working , Yihi authorized a replacement! Kind of surprised me cause They never admit any thing went wrong with there chip .
I have everything I need now to build my Faux Beta Box On another note My SX350j chip malfunctioned, the battery gauge stopped working , Yihi authorized a replacement!
Kind of surprised me cause They never admit any thing went wrong with there chip .
My RMA'ed chip came yesterday
On another note My SX350j chip malfunctioned, the battery gauge stopped working , Yihi authorized a replacement!
They have to try keep up with evolv post sale service lol.
Morning Steamer, Maybe YiHi is being shamed by Evlov's customer service, I'm sure they have lost a lot of business to Evlov. Anyway, it's good news on both fronts!
I've run out of boards, well I do have an old YiHi I took out of my ZNA clone when I put the DNA40 in it and I have the last Hana box I bought that I tore down to put a VT 510 in. I'm thinking of putting that YiHi board in the last Hana box, that board did work better then any of the other china 30 watt boards I've replaced. I need to either go back to one of my other hobbies or get some more Evlov boards and Hammond boxes to build.
I'm going to meet with the owner of the local vape shop who liked my 1590G build, now that I have my second one done, the 1590A, I'm going to have a sit down with him, let him play with them while connected to my laptop and talk coin about building some for him. I have my doubts he'll want to pay what I would have to charge. There are mods out there now with the 200 that I'm sure he could buy at wholesale less then what I would charge, but I'm not going to do all that work for peanuts.
Anyway, it's good news on both fronts! I've run out of boards, well I do have an old YiHi I took out of my ZNA clone when I put the DNA40 in it and I have the last Hana box I bought that I tore down to put a VT 510 in. I'm thinking of putting that YiHi board in the last Hana box, that board did work better then any of the other china 30 watt boards I've replaced. I need to either go back to one of my other hobbies or get some more Evlov boards and Hammond boxes to build.
I'm going to meet with the owner of the local vape shop who liked my 1590G build, now that I have my second one done, the 1590A, I'm going to have a sit down with him, let him play with them while connected to my laptop and talk coin about building some for him. I have my doubts he'll want to pay what I would have to charge. There are mods out there now with the 200 that I'm sure he could buy at wholesale less then what I would charge, but I'm not going to do all that work for peanuts.
Morning Steamer, Maybe YiHi is being shamed by Evlov's customer service, I'm sure they have lost a lot of business to Evlov.
I've run out of boards, well I do have an old YiHi I took out of my ZNA clone when I put the DNA40 in it and I have the last Hana box I bought that I tore down to put a VT 510 in. I'm thinking of putting that YiHi board in the last Hana box, that board did work better then any of the other china 30 watt boards I've replaced. I need to either go back to one of my other hobbies or get some more Evlov boards and Hammond boxes to build.
I'm going to meet with the owner of the local vape shop who liked my 1590G build, now that I have my second one done, the 1590A, I'm going to have a sit down with him, let him play with them while connected to my laptop and talk coin about building some for him. I have my doubts he'll want to pay what I would have to charge. There are mods out there now with the 200 that I'm sure he could buy at wholesale less then what I would charge, but I'm not going to do all that work for peanuts.
The value proposition is he can have it exactly the way he wants instead of what appeals to the masses.
Just what I was thinking, Evlov really raised the bar in the ecig market. Not only standing behind their products with a no BS warranty but also making it pretty hard for other manufactures to beat what the 200 can do. Then add Evlov taking daily feedback from the customer on their own forum and constantly upgrading and improving the features via the software & firmware updates. That has really put the pressure on the rest of the market.
Morning Steamer, Maybe YiHi is being shamed by Evlov's customer service, I'm sure they have lost a lot of business to Evlov.
I've run out of boards, well I do have an old YiHi I took out of my ZNA clone when I put the DNA40 in it and I have the last Hana box I bought that I tore down to put a VT 510 in. I'm thinking of putting that YiHi board in the last Hana box, that board did work better then any of the other china 30 watt boards I've replaced. I need to either go back to one of my other hobbies or get some more Evlov boards and Hammond boxes to build.
I'm going to meet with the owner of the local vape shop who liked my 1590G build, now that I have my second one done, the 1590A, I'm going to have a sit down with him, let him play with them while connected to my laptop and talk coin about building some for him. I have my doubts he'll want to pay what I would have to charge. There are mods out there now with the 200 that I'm sure he could buy at wholesale less then what I would charge, but I'm not going to do all that work for peanuts.
Morning Willy
I have a, soon to be 2 SX 40 watt chips from the Zero I modded
I also made a pinout sheet for were all the connections go
There non TC chips and read resistance a little low, a bit bigger than a DNA40.
I would give them away if some one is interested?
I guess they can try. It would be real hard to even come close to Evolv's after sales service level
I took mine off last night to clean some condensation out and generally see how it was doing...I put a sharp edged flat chisel into the top crack and twisted to start the movement, then grabbed the exposed tail end with some pliers and pulled it off.
- Status
Similar threads
