I really wish they would either make the ribbon longer for the screen or attach the screen to the board.
Sent from the Truck O shop
Sent from the Truck O shop
Mike n Tibs DNA Mods!
- Thread starter Proetus
- Start date
- th_trl_thread_readers 0
- Status
Hmm... I will be down in your neck of the woods all of next week.
Tuesday or Thursday looks good on this end.
mnkes begun lacking power at 3.7 volts
and when I charge them they took 2200 mah
my conclusion is they're fugazi or defective
btw 18650 test went very well,
a sammy 25r took 2250 mah after giving weak batt error after whole day vaping
it was same atty & build & juice.. fired between 19-20 watts.
i think everybody's hanging out in mike's new interest thread
Soooo glad you posted that! (and that I happen to see it)
Ok so after a few days having the SX350 M class chip, I can say that it's not a DNA 40.
I don't think it really has true temp control, it don't count degrees in real time like a DNA does.
If the wick gets dry it will warn you thats it. The resistance of the atty in TC is not real time either, when you attach your atty you hit +&- and it reads the resistance and sets it there, and it stays there, even if the resistance changes.If you swap attys and don't hit +&- it stays at the old setting and gives you a nasty hit. I don't like that at all
There is a lot of fluff on the screen 4 modes witch are all the same, no noticeable difference for me any way.
There is some other thing that counts like an odometer don't know what it's for and don't know why it would even be there.
I'v seen all these videos and read all these post about how much better it is than a DNA, makes me wonder what these folks are HIGH ON!
I will say it's a solid chip like the SX 350 is, it's consistent and works well,it is real easy to install.
An advanced Temperature Controlling Chip like a DNA 40 it is not.
I bought 1 to try it, I did, I'm not impressed at ALL! and wont be buying any more of them
I don't think it really has true temp control, it don't count degrees in real time like a DNA does.
If the wick gets dry it will warn you thats it. The resistance of the atty in TC is not real time either, when you attach your atty you hit +&- and it reads the resistance and sets it there, and it stays there, even if the resistance changes.If you swap attys and don't hit +&- it stays at the old setting and gives you a nasty hit. I don't like that at all
There is a lot of fluff on the screen 4 modes witch are all the same, no noticeable difference for me any way.
There is some other thing that counts like an odometer don't know what it's for and don't know why it would even be there.
I'v seen all these videos and read all these post about how much better it is than a DNA, makes me wonder what these folks are HIGH ON!
I will say it's a solid chip like the SX 350 is, it's consistent and works well,it is real easy to install.
An advanced Temperature Controlling Chip like a DNA 40 it is not.
I bought 1 to try it, I did, I'm not impressed at ALL! and wont be buying any more of them
Ok so after a few days having the SX350 M class chip, I can say that it's not a DNA 40.
I don't think it really has true temp control, it don't count degrees in real time like a DNA does.
If the wick gets dry it will warn you thats it. The resistance of the atty in TC is not real time either, when you attach your atty you hit +&- and it reads the resistance and sets it there, and it stays there, even if the resistance changes.If you swap attys and don't hit +&- it stays at the old setting and gives you a nasty hit. I don't like that at all
There is a lot of fluff on the screen 4 modes witch are all the same, no noticeable difference for me any way.
There is some other thing that counts like an odometer don't know what it's for and don't know why it would even be there.
I'v seen all these videos and read all these post about how much better it is than a DNA, makes me wonder what these folks are HIGH ON!
I will say it's a solid chip like the SX 350 is, it's consistent and works well,it is real easy to install.
An advanced Temperature Controlling Chip like a DNA 40 it is not.
I bought 1 to try it, I did, I'm not impressed at ALL! and wont be buying any more of them
Must be a board for dry herb users LoL.
Interesting, thanks for the input. Most guys that have both think the SX is better. Worst case, I don't like it and I sell it. I just saw the Boxer mod that uses the SX350j which looks interesting. Hopefully, there's a DNA200 like that.Ok so after a few days having the SX350 M class chip, I can say that it's not a DNA 40.
I don't think it really has true temp control, it don't count degrees in real time like a DNA does.
If the wick gets dry it will warn you thats it. The resistance of the atty in TC is not real time either, when you attach your atty you hit +&- and it reads the resistance and sets it there, and it stays there, even if the resistance changes.If you swap attys and don't hit +&- it stays at the old setting and gives you a nasty hit. I don't like that at all
There is a lot of fluff on the screen 4 modes witch are all the same, no noticeable difference for me any way.
There is some other thing that counts like an odometer don't know what it's for and don't know why it would even be there.
I'v seen all these videos and read all these post about how much better it is than a DNA, makes me wonder what these folks are HIGH ON!
I will say it's a solid chip like the SX 350 is, it's consistent and works well,it is real easy to install.
An advanced Temperature Controlling Chip like a DNA 40 it is not.
I bought 1 to try it, I did, I'm not impressed at ALL! and wont be buying any more of them
i think everybody's hanging out in mike's new interest thread
I fade out when watching nba finals last night, I'm sticking rightaway
thank you Tibs for the heads up
All I am allowed to say at this point is keep your eyes on the Planning and Discussion Forum! NDAs and all.........
Argh!
...must.......resist!
Tapalapadingdong
- Status
Similar threads
