Mini protank not working at all?

[Danieldaniel]

This is very weird. My "dream vapor" brand mini protank was working completely fine earlier today, now it's just not working. It's not leaking, not gurgling, my battery IS fully charged. There's just no vapor coming out and there is air flow... I know it's the pro tank and not my
battery because I just tried my other tank and it worked fine.


I bought the mini protank a couple days ago, filled it up a couple times so far. Very weird I really
need help on this... I have been vaping a vanilla and fruit punch flavor, 8/16mg nic and a tannish color, not clear, not
black.

VIDEO: http://youtu.be/3UlVa3WHPs4

 

[Danieldaniel]

This is very weird. My "dream vapor" brand mini protank was working completely fine earlier today, now it's just not working. It's not leaking, not gurgling, my battery IS fully charged. There's just no vapor coming out and there is air flow... I know it's the pro tank and not my
battery because I just tried my other tank and it worked fine.




I bought the mini protank a couple days ago, filled it up a couple times so far. Very weird I really
need help on this... I have been vaping a vanilla and fruit punch flavor, 8/16mg nic and a tannish color, not clear, not
black.

 

[DejaEntendu]

Try changing the coil.

 

[Danieldaniel]

I just got it brand new 2 days ago, the coil hasn't vaped but maybe 2 mls of juice. That may be the issue but it just doesn't make sense

 

[Bassnorma]

This has happened to me a couple of times when I didn't screw the coil into my Protank 2. The coil itself may screw in (not sure on the mini but they could be the same)....maybe check and see if it is all the way screwed down?

 

[Danieldaniel]

Just tried tightening the coil, didn't work :/ it was already on tight.

 

[Bassnorma]

Just tried tightening the coil, didn't work :/ it was already on tight.

OK...do you have any spare coils?

 

[crxess]

Slightly pull the center pin on the Tank downward(SLIGHTLY!!!!!!!!)

Your Tank and Battery Center pins are likely not making contact.

Over tightening causes the pin to be compressed.

 

[Rickajho]

Do you have a meter or are you using an APV with a built-in ohm checker? It could just be that the coil popped open - it happens. Have you tried replacing the coil yet?

 

[Danieldaniel]

Do you have a meter or are you using an APV with a built-in ohm checker? It could just be that the coil popped open - it happens. Have you tried replacing the coil yet?

I'm sorry I'm not very up to date on vape terminology. What's a meter and APV? I have no ohm checker I'm currently using a vision spinner battery/mod that has adjustable voltage from 3.3-4.8 volts what happened if the coil "pops open" because I did take apart the tank and cleaned it a bit because it wasn't producing much vapor, than after I put it back together it didn't vape at all.
And yes I do have one spare coil, but the current coil that isn't working has bad hardly any has yet. I'm honestly very confused I've never had anything like this happen to me.

 

[Danieldaniel]

Slightly pull the center pin on the Tank downward(SLIGHTLY!!!!!!!!)

Your Tank and Battery Center pins are likely not making contact.

Over tightening causes the pin to be compressed.

Pull it downwards? One thing I tried earlier was taking a sharp knife and very slightly wiggling the center pin up in hopes that the center pin wasn't pushed down too far. You're saying I should push the batter center pin back down?

 

[Rickajho]

Please don't cross post the same question in multiple forums. http://www.e-cigarette-forum.com/fo...ini-protank-not-working-all.html#post14142166

 

[Danieldaniel]

In sorry about the double-post. I wasn't sure where to post and where I would actually get help. I could not find a forum section on tank malfunctions

 

[twgbonehead]

Pull it downwards? One thing I tried earlier was taking a sharp knife and very slightly wiggling the center pin up in hopes that the center pin wasn't pushed down too far. You're saying I should push the batter center pin back down?

No. he's saying pull the center pin of the HEAD down. Not the battery!

 

[techtimb]

Replace the coil. Pop means that it is no longer working as it should. That should fix your problem.


Tim

 

[classwife]

In sorry about the double-post. I wasn't sure where to post and where I would actually get help. I could not find a forum section on tank malfunctions

Merged duplicate threads and moved to Clearomizers

 

[Bassnorma]

Slightly pull the center pin on the Tank downward(SLIGHTLY!!!!!!!!)

Your Tank and Battery Center pins are likely not making contact.

Over tightening causes the pin to be compressed.

Try this danieldaniel ^...there will be a center pin in there...let me see if I can find a video....This guy shows how to clean another kanger type tank but the Kanger coils are all very similar and he explains all of the parts as he is taking it apart,

 

[dopamine1]

Might have popped a coil, change the atomiser head and see if it works.

 

[Danieldaniel]

On I just changed the coil and now it's working perfectly... I'm confused, what happened to my other cool? It just randomly stopped working after barely any usage.. What's wrong with it? I cleaned it under warm water right before it stopped working.

 

[Bassnorma]

On I just changed the coil and now it's working perfectly... I'm confused, what happened to my other cool? It just randomly stopped working after barely any usage.. What's wrong with it? I cleaned it under warm water right before it stopped working.

Have a look at that video I posted....maybe something in that guy's cleaning process will help you figure out what went wrong. =) Glad you got it working though.