MMVapors

[timk]

I'm confused, no surprise I have an extra Poldiac 18500 battery tube and pants. What parts do I need to order to use Nanos button and make a mod with 510 connection top? If that information is in the manual, then I'll wait for that. Thanks!

 

[Jim Damianidis]

If you have the spares that Poldiac came with then you need only yhe Nanos Button and the adapter ring

 

[timk]

Think I need a picture LOL sorry but I don't understand the parts that provides the 510 center pin and positive battery contact.

Yes, I have all spare parts that came with Poldiac. Also have the Poldiac 510 top piece since my Poldiac is now in hybrid mode with TNS.

 

[Jim Damianidis]

2 spears only.

NANOS | Nanos | mmvapors.com

NANOS | Nanos | mmvapors.com

 

[timk]

Ok, cool. Thank you, sorry for all the questions. I just like to understand things mechanically before I buy.

 

[vapspaz]

Wow! Look at this little gem and it's only 45mm tall!!! You talk about a stealth vape with a little bling!

That's just crazy Jim! Nice job.


Hell.... at this size I could bump up my battery size to 18650 and still be over 12mm shorter than my current set-up that's using 18350's. Hmmmm......

 

[Mr.Mann]

Wow! Look at this little gem and it's only 45mm tall!!! You talk about a stealth vape with a little bling!

That's just crazy Jim! Nice job.


Hell.... at this size I could bump up my battery size to 18650 and still be over 12mm shorter than my current set-up that's using 18350's. Hmmmm......

I know, it's fascinating -- and also stunning.

 

[Jim Damianidis]

Thank you so much!
It is 53mm tall.
Plus 15mm for 18500 =68mm
Plus 15mm for 18650 =83mm
Sorry for my short answers!

 

[Mr.Mann]

Jim, all these options are going to make me go a wee bit crazy! OMG! There's so much you can do to customize your own mod. So ver sweet.

 

[Mr.Mann]

Thank you so much!
It is 53mm tall.
Plus 15mm for 18500 =68mm
Plus 15mm for 18650 =83mm
Sorry for my short answers!

The 18350 is 53 mm?

 

[Jim Damianidis]

Yes it is.
Lol
So many options
And for Poldiac owners? Haha.. Even better!
Thank you

 

[vapspaz]

Thank you so much!
It is 53mm tall.
Plus 15mm for 18500 =68mm
Plus 15mm for 18650 =83mm
Sorry for my short answers!

Ah, I see. I was just going by what your web site says. Ya might want to fix that or make it more clear. It must be talking about the actual tube length not the over all assembled length.
But those are impressive numbers regardless and VERY nice looking mods.

You must have had lots of Lego's and Erector sets when you were little. Throughout your entire product line one part fits another to create even more fun toys.

 

[Mr.Mann]

Jim, I can see a HUGE area for engraving with these singular tubes -- are there going to be any options for that in the future?

 

[vapspaz]

Hey Jim as long as you are here, I have a quick question. Or anyone.

For the last month one of my Mini DiD's is acting up and I can't figure out what is wrong. I've been using this D14 every day all day long for close to a year now with no major issues.
Recently I have to push sideways on it while I'm taking a vape in order to get it to fire. If I don't push on it sideways it doesn't fire sometimes. I've checked the battery end post and it is sticking out beyond the 510 threads like it always has so I don't think that's the problem. Have you ever heard of this before or know how I can fix it? My plastic (Top & Bottom) inserts don't look worn out but could they be causing this?

 

[vapspaz]

Yup, I've done that many times thinking that's what was causing it but no go. I even wrapped the center post with teflon tape to see if that would help. Still no go.

 

[timk]

How the Nanos parts work on the Poldiac:


You have your Poldiac parts:
The Pants, battery tube, Top Connector Plastic, Negative Pole Plate (came in the extra's bag with your Poldiac), Hot spring and the Top Cap

You put the Poldiac parts together:

Then you have the "Poldiac to Nanos Adapter" and the "Full Button for Nanos" (you can find both in Spare Parts - Nanos)

You attach the Nanos button:

and you attach the Poldiac to Nanos adapter:

and voila: one Poldiac transformed into a Nanos:

I hope that explains it all ;-)

PERFECT, thank you so much for taking the time to do that!

 

[Mr.Mann]

The decision has been made, now I just have to decide which finish! Jim, GREAT job!

p.s. Will any stores in the US be carrying these anytime soon?

 

[Portertown]

Ordered a polished brass 18650 Nanos with single tube tonight. Now the wait begins for it to make the trip from Greece to North Carolina. If this order is like my others from MMVapors it should be here in a couple of days. Then my two Poldiacs will have a "little" brother/sister to hang out with.

 

[DSmooch]

MMvapors is just TROUBLES! (for the pocket I mean lol)
congrats for the beautiful new peice Jim...

 

[Rule62]

How the Nanos parts work on the Poldiac:


You have your Poldiac parts:
The Pants, battery tube, Top Connector Plastic, Negative Pole Plate (came in the extra's bag with your Poldiac), Hot spring and the Top Cap

You put the Poldiac parts together:

Then you have the "Poldiac to Nanos Adapter" and the "Full Button for Nanos" (you can find both in Spare Parts - Nanos)

You attach the Nanos button:

and you attach the Poldiac to Nanos adapter:

and voila: one Poldiac transformed into a Nanos:

I hope that explains it all ;-)

Question: When using the Nanos full button and Poldiac adaptor, does the battery get inserted upside down (negative side up)?