Modding TF Cyclonf for BF?

[Deacon987]

Hey guys and gals. I have a TF Cyclone with AFC on the way I'd like to mod for bf. Looks like it should be as simple as removing the 510 and slotting it, then putting a hole through the center post below the post hole for the positive post. Anyone have any tips or advice? I'd be obliged.


Sent from my iPhone using Tapatalk

 

[ebarrios]

Hey guys and gals. I have a TF Cyclone with AFC on the way I'd like to mod for bf. Looks like it should be as simple as removing the 510 and slotting it, then putting a hole through the center post below the post hole for the positive post. Anyone have any tips or advice? I'd be obliged.

Sent from my iPhone using Tapatalk

The method I've used on two cyclones is to press out the center post, then cut a channel the length of the post with a dremel. (stopping before the post hole, of course)

i didn't like the juice flow on my first attempt, so the 2nd time in addition to cutting a channel I removed some of the center insulation plastic along the channel. Worked like a charm!

If you go this route, put some thought into which side you want the juice to come out before doing any cutting.

Enjoy your Cyclone! AFC Cyclone is by far my favorite setup on my Reos. I can't go back to reomizers anymore. (Sorry Rob!)

 

[Rat2chat2]

Good information. Thank you. I have read so much about these recently. Good luck to you and when you get it and get it done, it would be wonderful if you could post pics to help others. hint hint

 

[Izan]

I'm an insulator slot-er myself.
Good Info HERE

Have fun
I

 

[canoeist]

I just cut the insulator & make a flat spot on the post head to line up with it. Did 2 clones yesterday, they work fine.

 

[B2L]

I've gotten into converting some recently, here's the thread http://www.e-cigarette-forum.com/fo...e-here-have-tools-skills-convert-cyclone.html post # 40 is my first attempt on a real Cyclone.