mods under $100?

[iamtumus]

i've been looking into the rev3 (ego v6) and the sneaky pete.
preferably something on the smaller scale.

by the way, i'm not interested WHATSOEVER in the lavatube.

 

[Hottody]

ITast variable volt! The iTaste VV e-cigarette uses built–in replaceable tank atomizers. The changeable atomizer system makes removal and cleaning of the atomizer quick, simple, and cost effective. It uses a dedicated atomizer for each liquid choice or changes it out just to keep it fresh.

Long live energy, high power discharge
The iTaste VV e-cigarette uses built-in 800 mAh polymer Li-Ion rechargeable battery with .high power discharge.

Puffer accounter
The iTaste VV electric cigarette tells how many puffs are remaining with its unique “puffer accounter “!

10 seconds cutoff
If the button is held down for 10 seconds or longer, the iTaste VV personal vaporizer will shut itself off until the button is released. In case that users forget to turn it off before storing it in your pocket or bag, which prevents the device from activating.

Short Circuit/Atomizer Protection
Short Circuit/Atomizer Protection protects the iTaste VV against shorted tank atomizers/cartomizers.

Over-Discharge Protection
The iTaste VV monitors the battery voltage and will automatically turn off when the battery is discharged.

Low Voltage Warning
When the iTaste VV y battery voltage is lower than 3.3V, the red LED light will flash 8 times and stop producing vapor. After continuous warning for 3 times, Infinity goes to off, then users need to recharge to continue vaping.

 

[arkador]

for $99 you can get an Infinity Pro from Notcigs. Fully electronic protected mod. Doubt I would every buy anything other than a Notcigs product ever again.

Unlike the iTaste, NotCigs products are handcrafted in America by people that want to see quality mods in the market, not Chinese that just want to make a buck.

 

[iamtumus]

well i have a buzz pro and i'm looking for something short and narrower, hence my first two ideas

 

[carlton]

How about an ego twist?

 

[six]

+1 ego twist. The 650 mah is only about 3 3/4 inches long and about a half inch or so thick (don't have a tape measure handy, but I think that's close).

Another really small VV under a hundred bucks that is worth looking at is the little sister vv from kens box mods.

 

[iamtumus]

well due to my price i'm limiting myself to, i'm considering getting the rev3, ego twist, and the gripper and spending the rest on cartos

 

[MickeyRat]

That sort of depends on what you want. The infinity pro is nice but, you'll still have to buy batteries and a charger. That will push it over $100. The Itaste and Twist are nice for what they are but, you won't be taking 1.5 ohm DCs to 4.8 volts with either one. You can turn the controls that far at least on the twist but, it stops at around 3.8V according to P. Brusardo. The SmokeTek Varicool will do it but, it's a box mod.

 

[iamtumus]

well i have my buzz pro for my 1.5 ohm attys at 6 ohms
i'm just looking for small well functional mods under $100
plus the plan i posted about in my last post sounds nice. nothing like a back up to my back up's back up's back up's back up.

well..that was confusing.

 

[MickeyRat]

well i have my buzz pro for my 1.5 ohm attys at 6 ohms
i'm just looking for small well functional mods under $100
plus the plan i posted about in my last post sounds nice. nothing like a back up to my back up's back up's back up's back up.

well..that was confusing.

I'm assuming you mean 6V. However, the Buzz Pro has a 5.5V cutout.

Something like the Twist or the Itaste are probably your best bet for small.

 

[wv2win]

I would look at the EVO. It's a selectable/variable, has gotten many positive reviews and is under $100:

http://www.sweet-vapes.com/shop?pag...color_plus.tpl&product_id=1132&category_id=34

 

[yankeebobo]

I have the ego c twist. A really nice low profile ecig. 1.5ohm carts single coil. Now I have the 1000mah battery so it's a little longer but not bad at all. The 650mah would be a tad shorter and should suit your needs. I love it. Even if I had something like a provari, I'd still keep an ego twist for more discretion.

 

[iamtumus]

i'm using my housemates ego c right now. first experience with an ego ever. holy god this thing hits nice for such a little f'er
i think i'm gonna order an ego c, an ego twist, and a rev 3.
incase you couldn't tell, i'm REALLY interested in the rev 3 and am absolutely buying one

 

[teddy_rox]

the ego v6 (REV3) isn't too shabby for the price. definitely reminds me of a "firefly" on crack. size wise, a lil too big for my taste to take on the go, but size doesn't matter when i'm vaping at home.

 

[iamtumus]

i'm used to taking my reo with me everywhere so the rev3 is nice. i ended up getting only a rev3, and i'm glad I didn't order those other ones.

 

[Rikaroo]

just ordered Apollo VTube Kit for $52.47 never used a vv before so here goes..

 

[martsumoto]

Provape 1
enough said

 

[markfm]

Old goat vv bottom feed box mod, $50. Add a couple pairs of batteries and a charger, for about $80 you'll be able to try both bottom feed and vv. OG basic non-VV is really low cost, somewhere around $25.

(I own pricier gear, too, but the OG is a cool, affordable, item. Ron is also good on communication if you have questions.)

For $120 you could get an infinity pro, charger, two sets of batteries. Notcigs was the original production vv, very good quality and performance, excellent cs.

 

[Hottody]

Just got a Bolt from VaporBeast, a weekend sale for 25 bucks!

 

[Tramane Moulton]

I have a REV3
My first APV

Pros: VV MOD for CHEAP they are like $30 bucks now
You can use everything from 1.8ohm to 3.0ohms as long as its 510
Hits hard I saw pbusardo saying the 4v is really like 4.5 or something
Nice slick chrome finish and cool led placement
Comes with 2 sets of batteries and charger which is suable for other APV mods like VMAX (which I just ordered)

Cons: DO NOT DROP IT
I got out of the car too fast one day and dropped it
It separates at the led and gold ring
There is a single wire that comes off the battery lead that goes to the circuit board
It snapped off.... I bought a soldering gun and fixed it! (STILL WORKS TODAY)

It over powered the 4v isnt really 4v its more. Things to keep in mind when using LR cartos
I dont think it has protection, It let me fry several 1.5ohm LR cartos