Status
Not open for further replies.

Sambuca

Ultra Member
ECF Veteran
Jul 23, 2013
2,947
20,505
Albuquerque
I give up on everything but Spinners. Got MVP V2, and almost everything tastes burnt. Popped the Evod of Moo juice and Blue Moo on it, burnt. Was fine on my Spinners. So I set MVP to 3.8v, just like it was on the Spinner, same thing, burnt. Popped it on a Spinner, it's fine. What the heck?! Everything tastes better and gives more vapor on a Spinner than on the MVP, at the same voltage. Had the same issue with my Vamo. So I give up. Stocking up on 1300mah Spinners in every color, a couple 650mah for times when a small one is better, and calling it quits on the big guns.

When I get into RDAs I'll revisit variable wattage.

the whole point of using wattage, at least for n00b like me, is that you avoid burning coils. just start at 3 w and move up. my v3s only start at 6, so 6.5 is usually where i'm at, but my coils are lasting a lot longer. no burning issues until i go over 8w.

mvp v2 also has an ohm meter. if you stick to voltage, at least check your attys to see where you can go.

just a thought...or 2...
 

Miarose

Vaping Master
ECF Veteran
Verified Member
Jul 27, 2013
3,458
16,474
West Chester, PA
the whole point of using wattage, at least for n00b like me, is that you avoid burning coils. just start at 3 w and move up. my v3s only start at 6, so 6.5 is usually where i'm at, but my coils are lasting a lot longer. no burning issues until i go over 8w.

mvp v2 also has an ohm meter. if you stick to voltage, at least check your attys to see where you can go.

just a thought...or 2...

my zmax does the work for me. i dont have to worry about my coils ohms, it'll adjust it. i assume that's what all vw will do?
 

KillaKat

Senior Member
ECF Veteran
Verified Member
Aug 8, 2013
77
257
MA
I went for months without issues with some juice, then all of a sudden, either the tips would start to melt or spring a leak or at the very least fogged up the inside plastic, that started to happen with the CE4's a T3 and a small eSmart. The ones that did that to me were, Morning Vape, Ecto-Cooler, Maraschino Cherry and oh hell I forgot the last one.

Then I guess I'll only be using it in only one of the evods I have. I just spent the money in the budget on MBV, which isn't a lot, but next purchase I'll be making is probably a protank mini, for the tank crackers I want to try, like sassafras.


Sent from my iPhone using Tapatalk - now Free
 

lisancentraltx

Vaping Master
ECF Veteran
Verified Member
Aug 28, 2009
4,173
9,491
59
Ringling Brothers Circus
Morning MBV peeps! =] I got some tanks loaded with juice, mods ready to choose from to take to work, feeling soooooooooo much better now that I got some higher VG in with nic! Thanks MBV!

I have a bit of vape porn for you guys, if you don't mind :p I only want to post because I noticed all of the MT BAKER VAPOR JUICE in the background LOL

34rb0gw.jpg


FT TVS, FT Chi-Chi, FT Sentinel, FT Volt clone with FT Protanks and Valley View Vapes polypro Boge tank
 

Ms.Kitty

Super Member
ECF Veteran
Verified Member
Aug 13, 2013
437
2,605
Florida
Well...I'm back! Went MIA for a couple days, even missed the great MVP coupon code! :(

Went on a little shopping spree with my youngest daughter (using 40% off coupon at Hobby Lobby)
Bought lots of fabulous bling and accessories for ecigs n the house.

On the way home, found out eldest daughter, pregnant niece, granddaughter and 2 of niece's children were all in car
wreck. Rolled the SUV at least 5 times.....
All are good. Niece broke her pelvic bone and shoulder. May require surgery on both.
But other than that it was all just bumps n bruises. They're all pretty beat up, but I am thankful that it's not
a whole lot worse.

When I got home the Bolt that I got from classie's was in the mailbox.
I LOVE IT.
Vapin' tangerine on it right now. :)
 

vwkitty

Super Member
ECF Veteran
Verified Member
Jun 10, 2013
678
2,161
CT
the whole point of using wattage, at least for n00b like me, is that you avoid burning coils. just start at 3 w and move up. my v3s only start at 6, so 6.5 is usually where i'm at, but my coils are lasting a lot longer. no burning issues until i go over 8w.

mvp v2 also has an ohm meter. if you stick to voltage, at least check your attys to see where you can go.

just a thought...or 2...

But. When I'm at lower wattage like 6-7, I get no vapor. I'm at 7.5 now with a 2.6 ohm head. It's doing okay, but if I put it on a Spinner around 3.8v, way more flavor and vapor.

Dunno. I'll keep playing. Just don't get it.
 

Miarose

Vaping Master
ECF Veteran
Verified Member
Jul 27, 2013
3,458
16,474
West Chester, PA
Well...I'm back! Went MIA for a couple days, even missed the great MVP coupon code! :(

Went on a little shopping spree with my youngest daughter (using 40% off coupon at Hobby Lobby)
Bought lots of fabulous bling and accessories for ecigs n the house.

On the way home, found out eldest daughter, pregnant niece, granddaughter and 2 of niece's children were all in car
wreck. Rolled the SUV at least 5 times.....
All are good. Niece broke her pelvic bone and shoulder. May require surgery on both.
But other than that it was all just bumps n bruises. They're all pretty beat up, but I am thankful that it's not
a whole lot worse.

When I got home the Bolt that I got from classie's was in the mailbox.
I LOVE IT.
Vapin' tangerine on it right now. :)

I'm glad to hear everyone is pretty much ok!
 

Terre

Super Member
ECF Veteran
Verified Member
Nov 28, 2008
798
2,756
Poteau, OK
Well...I'm back! Went MIA for a couple days, even missed the great MVP coupon code! :(

Went on a little shopping spree with my youngest daughter (using 40% off coupon at Hobby Lobby)
Bought lots of fabulous bling and accessories for ecigs n the house.

On the way home, found out eldest daughter, pregnant niece, granddaughter and 2 of niece's children were all in car
wreck. Rolled the SUV at least 5 times.....
All are good. Niece broke her pelvic bone and shoulder. May require surgery on both.
But other than that it was all just bumps n bruises. They're all pretty beat up, but I am thankful that it's not
a whole lot worse.

When I got home the Bolt that I got from classie's was in the mailbox.
I LOVE IT.
Vapin' tangerine on it right now. :)

That's horrible!! Glad they are all ok!
 

Terre

Super Member
ECF Veteran
Verified Member
Nov 28, 2008
798
2,756
Poteau, OK
Morning MBV peeps! =] I got some tanks loaded with juice, mods ready to choose from to take to work, feeling soooooooooo much better now that I got some higher VG in with nic! Thanks MBV!

I have a bit of vape porn for you guys, if you don't mind :p I only want to post because I noticed all of the MT BAKER VAPOR JUICE in the background LOL

34rb0gw.jpg


FT TVS, FT Chi-Chi, FT Sentinel, FT Volt clone with FT Protanks and Valley View Vapes polypro Boge tank

Beautiful!!!!
 

Sambuca

Ultra Member
ECF Veteran
Jul 23, 2013
2,947
20,505
Albuquerque
But. When I'm at lower wattage like 6-7, I get no vapor. I'm at 7.5 now with a 2.6 ohm head. It's doing okay, but if I put it on a Spinner around 3.8v, way more flavor and vapor.

Dunno. I'll keep playing. Just don't get it.

huh, maybe a connection issue? i use high pg (80%) get lots of vapor @ 6.5. new device, maybe your connector is pushed up a bit from your spinner.

had a similar issue when i bought a bunch of mini davides. turned out that i was tightening them a tad too much, it was blocking the airholes (but, don't ask how many times i tried raising the battery post before i figured that out! :facepalm:)
 

Sambuca

Ultra Member
ECF Veteran
Jul 23, 2013
2,947
20,505
Albuquerque
Well...I'm back! Went MIA for a couple days, even missed the great MVP coupon code! :(

Went on a little shopping spree with my youngest daughter (using 40% off coupon at Hobby Lobby)
Bought lots of fabulous bling and accessories for ecigs n the house.

On the way home, found out eldest daughter, pregnant niece, granddaughter and 2 of niece's children were all in car
wreck. Rolled the SUV at least 5 times.....
All are good. Niece broke her pelvic bone and shoulder. May require surgery on both.
But other than that it was all just bumps n bruises. They're all pretty beat up, but I am thankful that it's not
a whole lot worse.

When I got home the Bolt that I got from classie's was in the mailbox.
I LOVE IT.
Vapin' tangerine on it right now. :)

heart sinks...

hope everyone heals up OK
 

Miarose

Vaping Master
ECF Veteran
Verified Member
Jul 27, 2013
3,458
16,474
West Chester, PA
woweee. so my SiD is only like an inch taller than my zmax with my protanks on them, but it seems so much bigger. i'm running it at 5 watts and, to me at least, its awesome. i run my zmax at 6 watts. i kinda feel like both of them look stupid with anything other than a full sized protank on them. lol
oh spurburry to the rescue. tastes so awesome. new protank, new pv. HOORAY!
 

DustyZ

Suspended
Jul 5, 2013
2,896
18,391
Ocala, FL, USA
I give up on everything but Spinners. Got MVP V2, and almost everything tastes burnt. Popped the Evod of Moo Juice and Blue Moo on it, burnt. Was fine on my Spinners. So I set MVP to 3.8v, just like it was on the Spinner, same thing, burnt. Popped it on a Spinner, it's fine. What the heck?! Everything tastes better and gives more vapor on a Spinner than on the MVP, at the same voltage. Had the same issue with my Vamo. So I give up. Stocking up on 1300mah Spinners in every color, a couple 650mah for times when a small one is better, and calling it quits on the big guns.

When I get into RDAs I'll revisit variable wattage.

The thing you need to remember with VV and VW devices are such as SVD, VAMO's, Zmax, not sure about the MVP, but they are regulated output whereas eGo and Spinners are unregulated, meaning that the output stay at the same level until the battery is drained to a specific point then the device shuts down to prevent further drainage, not true with eGo and spinners,, they will continue to output and each time it is at a lower level as the battery drains. Now, whether or not this is what is causing your issue, it may or may not be, when it was working my V-Life Max I had set to 8 Watts as that was the sweet spot for me, but now I only have my eGo's to use, granted they are only the eGo-T's are are not at VV but most of the juices now just are ok, at the start most are ok but as the battery drains it's like just fighting to get flavor. Even though it was a bit of a pain and I only had it for a short while I miss the output of the V-life Max, similar to Zmax and SID's but think it's a much cheaper made product, that is why I was planning on getting an SVD either a MPV or Itaste VV for out and about, but that is going to have to wait a while when I get back to work.
 

DustyZ

Suspended
Jul 5, 2013
2,896
18,391
Ocala, FL, USA
weird :( i'm sorry it's not working out for you.
i bought two new batteries for my sid. ONE came today. I guess that's better than None, but I'm like hi, I need two, I ordered two. WAH!

Was that from the same vendor? Now that would irk me to no end, if I had 1/2 of something I ordered and need the other 1/2 to make the device work.... I'd be chomping at the bit! :facepalm:
 
Status
Not open for further replies.

Users who are viewing this thread