and not to get modded or anything, but erm, Uno, did you request a picture of a unicorning a dragon?
My pic was Vapezilla
Yup your censor there might not fly
Last edited:
mtbakervapor
- Thread starter xNaTe21x
- Start date
- th_trl_thread_readers 0
- Status
My pic was Vapezilla
Yup your censor there might not fly
Someone showed us how to use mesh in an Igo L and how to setup an RSST at Saturday's NEV vape meet.
I have an Igo L on the way in my current MBV order.
UNO MAS - Bull Box mods website doesn't seem to have prices. Where are they available & for how much?
Sambuca--looking to get a drip atomizer to test whether flavors have steeped enough--what drip atomizer are you using and is it easy to clean for the next flavor? 
--Bo
--Bo
Hello MBVers. Hope you all are doing well today. I have a couple new flavors on my menu today. Johnny Chimpo which is very delicious even only a few days out of the mailbox. Bubblegum from 10/4 is pretty good. My Butterscotch is at about only 1/4 full going to put Strawberry shortcake in that one. I also have a couple of usuals going my DIY Tobacco and Cinnamon Roll. What I do with my IGO-L for changing flavors is I take out the drip tip then I fire it up and blow across and into the hole and dry burn it away while blowing on it real good to keep it from getting to hot. Only takes a minute to get the pervious flavor all gone.
Sambuca--looking to get a drip atomizer to test whether flavors have steeped enough--what drip atomizer are you using and is it easy to clean for the next flavor?
i got the cheapest rba from MBV. it's a cinch to clean, but really small. go ahead and ask the few folks who drip here. you can probably get a great deal for not an arm and a leg (though i reckon you could do that). these look a tad hard to rebuild (cuz they be tiny), but there as cheap as some disposables, so what the heck, why not! the next size up seem to be oos all the time (or i'd say try those).
they are sweet little things!
edit: these (and the bigger ones are still oos):
SmokTech Mini RDA - Mt Baker Vapor - Electronic Cigarettes
I just got my last order and asked for a vaping kitty drawing. I got this:
Looks like the same person that drew Mowli's platypus. I think it's cute.
Almost matches my kitty!
MBV Cinnamon Roll makes everything better.
Hm... today's tank selection. Coffee + Cinnamon Roll, Salted Caramel that wasn't quite aged enough because I was impatient and ran out + Cinnamon Roll, Mocha + Cinnamon Roll... I might even have a tank of nothing but Cinnamon Roll with me.
I think I should have had one for breakfast.
Hm... today's tank selection. Coffee + Cinnamon Roll, Salted Caramel that wasn't quite aged enough because I was impatient and ran out + Cinnamon Roll, Mocha + Cinnamon Roll... I might even have a tank of nothing but Cinnamon Roll with me.
I think I should have had one for breakfast.
It appears Brett does not have any tips listed currently, believe he took all his stock to the vapefest thingie, hopefully he'll have some up on the website soon. FYI they run typically $45 for standard size Ming or Hourglass, the Mini's I believe are in the $35 range.
He has an ECF thread
thanks Sambuca--ended up going with bridgeless 510 from DV. As little as I drip this should work.--Bo
It appears Brett does not have any tips listed currently, believe he took all his stock to the vapefest thingie, hopefully he'll have some up on the website soon. FYI they run typically $45 for standard size Ming or Hourglass, the Mini's I believe are in the $35 range.
He has an ECF thread
Mine's a Pinnacle from DV for $16 - Pinnacle Drip Tips - Home
He doesn't have many trustone in stock beside turquoise right now. Nice stuff
Last edited:
My most expensive drip tip was $7.49 for the metal skull tip. Most of my swirly colored tips were $0.83 from smartvapes. I think the 2 chrome ones were $1.44 each.
PS- Those TruStone tips look nice mine are mostly just some kind of plastic Celluloid I think.
I think the 2 chrome ones were $1.44 each.PS- Those TruStone tips look nice mine are mostly just some kind of plastic Celluloid I think.
Last edited:
Lung hits on RDA's is the only way to go, the purest taste from 6mg 50/50. . . tons o' vapor and taste.
IMO, the IGO-L is a good place to start. I wouldn't recommend starting with sub-ohm (there are plenty of possible errors that can cause big problems), but it sounds like you have a good handle on what you're up against. I'm not a cloud chaser either, I prefer to chase flavor. I will say that micro coils with cotton ball wicks suit me well. Good luck with it
You can use mouth to lung inhale thought right? Somebody told me if there was 2 holes you had to direct hit but the one I ordered only has one.
You can do it but it may be very airy. For testing purposes you could use a small piece of tape over the hole and poke a smaller one in to get the correct draw you are looking for for mouthal hits. Then fill the hole with epoxy and red drill smaller. If you so desire.
It's all personal preference, at 6mg I don't get much of a TH so a lung inhale helps with that feeling. Two airholes are for dual coils but you could still build a single coil just get an airier draw. I don't like the typical stock airholes and I always drill them out to atleast 5/64 because more airflow creates more vapor and an airier draw. Personal preference. If you do decide to drill them out start small (use a titanium drill bit or like hardness), and I wouldn't suggest going any bigger than 1/8.
IMO Hawk Sauce and Thug Juice are both great right of the bat and most definitely get better with age, about two weeks fer me before they are perfected; but after this time the menthol comes out more on Hawk Sauce (but still it's barely there) and lessens on the Thug Juice (still way up front).
Has anyone else noticed this? Or have any clue why this may be?
Sent from my GT-P3113 using Tapatalk 4
Has anyone else noticed this? Or have any clue why this may be?
Sent from my GT-P3113 using Tapatalk 4
- Status
Similar threads
