Status
Not open for further replies.

DustyZ

Suspended
Jul 5, 2013
2,896
18,391
Ocala, FL, USA
Well all, I am going to try to call it a night, I have never been to bed before 12:00am so this is going to be a tough night. I had to take a 3 hours assessment today, well it only took me 2 hours, I was the first out of the door. I passed the assessment that was required by the company I will be interviewing with tomorrow, so wish me luck, I really need this job, I really do not want to have to sell my bike, I would be heart broken if I had to do that.
 

Mowgli

Runs with scissors
ECF Veteran
Verified Member
Mar 25, 2013
8,723
36,953
Taxachusetts
Well all, I am going to try to call it a night, I have never been to bed before 12:00am so this is going to be a tough night. I had to take a 3 hours assessment today, well it only took me 2 hours, I was the first out of the door. I passed the assessment that was required by the company I will be interviewing with tomorrow, so wish me luck, I really need this job, I really do not want to have to sell my bike, I would be heart broken if I had to do that.

Get some sleep, get the job, keep the bike, keep us posted.
 

mourningshadow

Ultra Member
ECF Veteran
Verified Member
Jan 5, 2013
1,708
7,931
46
St. Louis, MO
www.aaronaltman.com
Well all, I am going to try to call it a night, I have never been to bed before 12:00am so this is going to be a tough night. I had to take a 3 hours assessment today, well it only took me 2 hours, I was the first out of the door. I passed the assessment that was required by the company I will be interviewing with tomorrow, so wish me luck, I really need this job, I really do not want to have to sell my bike, I would be heart broken if I had to do that.

Best of luck to you man, hope you get it!
 

mourningshadow

Ultra Member
ECF Veteran
Verified Member
Jan 5, 2013
1,708
7,931
46
St. Louis, MO
www.aaronaltman.com
Night my friends :)

going to shut down before it starts dumping, thunder is pretty close....

Night Mike.

Think I am going to hit the shower and call it a night as well. Between my day at work and this ball game I need to wash the ickyness of this day off.

G'night everyone
 
Last edited:

mcol

Vaping Master
ECF Veteran
May 5, 2013
4,517
19,662
Missouri
Well all, I am going to try to call it a night, I have never been to bed before 12:00am so this is going to be a tough night. I had to take a 3 hours assessment today, well it only took me 2 hours, I was the first out of the door. I passed the assessment that was required by the company I will be interviewing with tomorrow, so wish me luck, I really need this job, I really do not want to have to sell my bike, I would be heart broken if I had to do that.

Get some rest and best of luck! Keep a positive attitude!!
 

kelli

Moved On
ECF Veteran
Feb 14, 2013
6,503
39,319
cocoon of lunacy

was just teasing you, hun. come here hug.jpg
 

Sambuca

Ultra Member
ECF Veteran
Jul 23, 2013
2,947
20,505
Albuquerque
Well all, I am going to try to call it a night, I have never been to bed before 12:00am so this is going to be a tough night. I had to take a 3 hours assessment today, well it only took me 2 hours, I was the first out of the door. I passed the assessment that was required by the company I will be interviewing with tomorrow, so wish me luck, I really need this job, I really do not want to have to sell my bike, I would be heart broken if I had to do that.

congrats on today and best of luck tomorrow, Big Guy! :thumbs:
 
Last edited:

Criticalmass

Ultra Member
ECF Veteran
Verified Member
Well all, I am going to try to call it a night, I have never been to bed before 12:00am so this is going to be a tough night. I had to take a 3 hours assessment today, well it only took me 2 hours, I was the first out of the door. I passed the assessment that was required by the company I will be interviewing with tomorrow, so wish me luck, I really need this job, I really do not want to have to sell my bike, I would be heart broken if I had to do that.

Good luck.

Sent from my DROID RAZR HD using Tapatalk
 

Sambuca

Ultra Member
ECF Veteran
Jul 23, 2013
2,947
20,505
Albuquerque
Distilled Water would be the only other option I am aware of...

Alcohol is a plenty at my house ;)

it's not advisable 'round here...

That sucks!

Here's a guitar solo though

love the picks taped under the body!

and i'll raise you a couple of old gents:



Thank you, Ramjet! I hadn't thought of that, but you're right. And I've got *reams* of documentation worthy of bringing to the PUC's attention.... plus, pretty bad PR to kill the power to a house where there are two people in power wheelchairs and one on oxygen, right? (Yes, there are medical letters on file saying they're not allowed to cut the power without notice. No, the power company doesn't care. And just for the icing on the cake, I don't remember the last time we were genuinely late with the bill... the rent and electricity always get paid before all else, cause those are the two things we'd be *really* screwed without.)

This could be quite a bit of fun, actually. :evil:

Thanks again.

file charges under the ADA. someone will care!

Yes the coils are tight with each other, I just had mine to where it wasn't touching the bottom grommet, the pin fits just fine, it basically all you are doing is making a vertical coil versus the horizontal coil and packing cotton, hemp or whatever you want around the coil and packing it very tightly so it doesn't leak or gurgle. It's a little more work and making sure the coil doesn't ride too high in the cup and making sure it doesn't touch the sides of it, but the change of flavor and hit are awesome, I can't say at this point being that I have used cotton how long it will last due to the cotton being packed so tightly but I don't see that is going to be a big issue, might be a little bit of a pain to take it out and replace it but maybe not that bad.

i know your busy, but i'm brainially challenged. :facepalm:

coils tight...but not touching each other, or is them touching OK?
 

Sambuca

Ultra Member
ECF Veteran
Jul 23, 2013
2,947
20,505
Albuquerque
If you're making a micro or nano coil them should is touching....grammar is way over rated.

you know i could read that for like an hour...and still not be sure what it says...right? :facepalm:

it looks like...touching...is...OK.

but the top end (negative? don't ask, i've been reading the other thread) should not touch the coils or the side of the...cup/basin thingy, right?
 
Status
Not open for further replies.

Users who are viewing this thread