mtbakervapor

[Sambuca]

An easy to follow how to video.

Vapor Lady Lounge Rebuild a Protank Atomizer, eVod Atomizer A New Way - YouTube

Best way to extend coils and wicks (not cotton) is to dry burn them however Evods,T3, AROs and others that use a rubber insert(insulator) are subject to having the rubber burnt (charged) if the leads get to hot so great care must be used to never let it get that hot.

I torch the Kanthal ,Silica or Ekowool prior to the build. Great thing about RBAs and AGA T2s is that there is no danger of burning any rubber / silicon insulators . SS mesh wicks in T2s are really easy to clean and dry burn.

that is the video i use! i just have a problem w/ 3mm silica. thinking 2mm or 1mm ekowool. have 2 weeks to make up my mind. cotton is an option, but that might be better suited for the vertical coil.

is there a vid on this "torching" of the wick?

just finished the first Pie Filmore show, sweeeet. Pete's guitar crashes during Splinters, and Steve sings about it in the end. Steve's mic tries to electrocute him during Hallelujah...and he sings about it in the end!
soundman changes the mic levels way up for Pete and Greg and the guitars go up for Doctor. after all their hassles, Doctor is played straight up (and not like a wild freeking banshee), it's almost like the doing a studio version. as the break-neck speed ones make my heart go ape, i love this version! very sweet!

and so far, 2 for 2 in Splinters, Sleepy John Estes' Leavin' Trunk!:

vaping ddl!

 

[Chas_L]

is there a vid on this "torching" of the wick?

I have seen several ,some as new builds and some as cleaning. Just torch unilt it glows . Aim is to remove any misc. oils rom manufacturing and packing.

 

[Criticalmass]

You know now I almost wish I knew about the Rainbow Sherbet so I could have gotten that as my sample. I do like Sherbet at times. Ahh well, perhaps next time.

 

[Cheryl75]

Happy Halloween MBV ers!!!! Going to be a stormy evening here per that weatherman

 

[Ta2ooz]

Happy Halloween MBV ers!!!! Going to be a stormy evening here per that weatherman

Good morning all, it's supposed to rain for most of the day and then clear up early eve, just in time for tricks and treats time. Pretty normal for around here.

 

[hawkeye46]

Just got some juice today and I noticed that when I shake the bottles, some have more bubbling than others, some not at all. Is their any correlation between bubbling and steep time needed? I could just taste them with my atomizers, but curious what others think. I know, I know, I have way too much time on my hands to be thinking about this.--Bo

 

[BigLebowski]

Torching Ekowool is not a must but it will stiffen it and cause it to fray less. I need to invest in a torch soon, taking the step into RBA's to see if a tank/steel rope is any better than my RDA's. I don't think it's possible but can't knock it until I try it.

 

[kelli]

is it just me or does anyone else, after shaking their juice bottles with their thumb over the opening, lick said thumb afterward?

 

[kelli]

Good morning MBV Happy Halloween!!



I went to the 10th Anniversary performance of Wicked last night, then the party at The Edison Ballroom. However, this made my Halloween complete!! Thanks Kelli!

glad you like, dear

 

[BigLebowski]

is it just me or does anyone else, after shaking their juice bottles with their thumb over the opening, lick said thumb afterward?

It's definitely not me, but I do sniff them obsessively until I wash my hands

 

[Stratman]

It's definitely not me, but I do sniff them obsessively until I wash my hands

I'm not sure how to take that...

 

[Stratman]

And a happy Halloween to all

 

[Stoneface]

Just got some juice today and I noticed that when I shake the bottles, some have more bubbling than others, some not at all. Is their any correlation between bubbling and steep time needed? I could just taste them with my atomizers, but curious what others think. I know, I know, I have way too much time on my hands to be thinking about this.--Bo

I'm guessing that the "bubbling" you see is flavoring blobs not mixed with the base...I don't know about extended steep times required by those juices, but....you could try putting those bottles in hot tap water for about 10 minutes and then shake them to see if they will blend together better. Since the flavoring isn't mixing into the base very well, your juice probably won't taste the way it should until all of the components stay mixed together. In my experience, that takes time but heat helps. YMMV

I'm not sure how to take that...

+1

 

[Stratman]

glad you like, dear

Kelli, I must say you look extremely lovely today ;-)

 

[kelli]

 

[kelli]

Kelli, I must say you look extremely lovely today ;-)

and i'm not even wearing makeup!

 

[Stoneface]

and i'm not even wearing makeup!

Me neither!!

 

[gjustin79]

My Blue moo, bananas gone nuts and strawberry 65/35 12mg have steeped for a week now.

I think it's safe to say I'm not really a fan of any of them. They are good on the first few vapes but get too artificially sweet after a while. I was expecting more natural flavors.

Perhaps I need to let them steep more. I still see micro bubbles when I shake them.

 

[Stratman]

My Blue moo, bananas gone nuts and strawberry 65/35 12mg have steeped for a week now.

I think it's safe to say I'm not really a fan of any of them. They are good on the first few vapes but get too artificially sweet after a while. I was expecting more natural flavors.

Perhaps I need to let them steep more. I still see micro bubbles when I shake them.

I always see bubble in my juices after shaking...it's just oxygen rising to the top

 

[kelli]

My Blue moo, bananas gone nuts and strawberry 65/35 12mg have steeped for a week now.

I think it's safe to say I'm not really a fan of any of them. They are good on the first few vapes but get too artificially sweet after a while. I was expecting more natural flavors.

Perhaps I need to let them steep more. I still see micro bubbles when I shake them.

i let all my juices steep at least a month now. a week is not near long enough for most of them. just sayin'