mtbakervapor

[u4ia]

+1 for carto tanks! I just ordered my third IBTanked, a halfling this time. Taste is great! I had a short learning curve where I was overfilling the cartos but once I got that figured out I really fell in love with them.

I've so had my eye on an IBTanked. I just keep killing the budget elsewhere.

 

[Cheryl75]

I didn't get my requested sherbert either in my order today. They wrote that they're out and gave me orange dream bar instead, saying it was similar. Well, I have herds of orange dream bar....not that I don't love it, but was excited about trying the sherbert. Guess I'll mix some lime, raspberry, and a little lemon in it and see if it becomes sherbert. Hope you like your razzleberry pie.

Your sample sounds better than mine, i dont think this razzleberry pie even smells good! At least they tried to give you something similar to the sherbert. Let us know if your mix comes out when you try it, sounds interesting!

 

[Khala]

Interesting.

Picked up some LR attys tonight for my eroll.

Made the mistake of trying them with 18mg yellow cake loaded up.

I honestly didn't realize how much stronger the TH would be.

I might have actually found a good solution for my usual evening low nic juices...

But not for my morning drive in!

 

[Uno mas]

Did the coils themselves burn, or was it the cotton wick??

You'll figure this out, I promise. You'll be frustrated in the meantime, but you'll get it.

I have to disagree with Uno a bit...I would try the micro coil since a "traditional" coil isn't working. I get the best flavor out of the micro coil, and in some ways it is easier to wind the coils. Since they are wound using a support (a drill bit, a syringe needle, a sewing needle, etc), it is pretty easy to keep them straight and even. The only tricky part for me is that I torch mine while it is on the support and let it cool to set the coils. That can be a fiddly maneuver. Keep the support in the coil while you install it in the RM2, and then remove it after you've screwed the legs down on the posts.

I wrap mine around a 6D finishing nail, works great, I slip my wick (pause here a sec ) ok, thru after its in place. Basically the same as a micro except for my coils are a higher gauge and less winds and larger diameter than the typical micro. I also don't go thru the torching process to keep the coils tight together, they work very well with 2mm Eko, just the right inside diameter to make full contact without any choking

I will at some point start buildin' a tru micro, my Russian 91% is a couple days out (Sat hopefully) which would be a perfect platform for one...

 

[Cheryl75]

Yeah for me that was butterscotch.
Debating whether to order now and again Black Friday (I'm stoked they
have 555 and Thug Juice back in stock), or wait. I real-ly should wait.

Dont wait! They might be out of what you want if you wait!

 

[Uno mas]

Dark yummy goodness

Sam Adams seasonal, Winter Lager

 

[mcol]

You guys are very very very bad influences on me.
Yeah I placed an order. Mostly some tobacco juices I've wanted to
try of theirs and also some thug juice (never tried that either).
And a make my own vanilla coffee thing. And a couple of peanut
butter ones - one with grape surprise, one with graham cracker.
Geesh people. LOL.

 

[Stoneface]

I wrap mine around a 6D finishing nail, works great, I slip my wick (pause here a sec ) ok, thru after its in place. Basically the same as a micro except for my coils are a higher gauge and less winds and larger diameter than the typical micro. I also don't go thru the torching process to keep the coils tight together, they work very well with 2mm Eko, just the right inside diameter to make full contact without any choking

I will at some point start buildin' a tru micro, my Russian 91% is a couple days out (Sat hopefully) which would be a perfect platform for one...

First....

I slip my wick (pause here a sec )

ROFLMAO

On to business....I've put my R91 together but haven't tried coiling and wicking it yet. I guess I'm chicken that I won't get it right But I did get some hemp fiber (vapemail!!) today, so I think I'm going to try a vertical micro coil once I boil my hemp I've heard great things! (I just hope this doesn't mean I will want another 3 or 4 R91s, that could get expensive )

 

[Ms.Kitty]

You guys are very very very bad influences on me.
Yeah I placed an order. Mostly some tobacco juices I've wanted to
try of theirs and also some thug juice (never tried that either).
And a make my own vanilla coffee thing. And a couple of peanut
butter ones - one with grape surprise, one with graham cracker.
Geesh people. LOL.

You'll love the graham cracker n pb!!

 

[Cheryl75]

You guys are very very very bad influences on me.
Yeah I placed an order. Mostly some tobacco juices I've wanted to
try of theirs and also some thug juice (never tried that either).
And a make my own vanilla coffee thing. And a couple of peanut
butter ones - one with grape surprise, one with graham cracker.
Geesh people. LOL.

Its all good!!!!

 

[Stoneface]

You'll love the graham cracker n pb!!

And Thug Juice

 

[Cheryl75]

You'll love the graham cracker n pb!!

So now I need to add graham cracker to my list!?!?!?!

 

[mcol]

Well I've wanted to get some tobacco flavors in for awhile now, cuz I
plan to give them a 2 month steep time, so......
Gonna have to get vaping if I plan to place a black Friday order.

 

[mcol]

So now I need to add graham cracker to my list!?!?!?!

I love their graham cracker.

 

[Cheryl75]

I love their graham cracker.

Oh my, i need another job! Or win the lottery!

 

[Stoneface]

Oh my, i need another job! Or win the lottery!

I hear there's a website out on the netz where you can find a Sugar Daddy now....

 

[dwarfcat]

Ive got the urge to buy 10 30ml bottles of juice, they are all sitting in my cart. Any idea what if anything will be offered on black friday? I want it allllll i wannnttt it alll i wannnt it alllll and I want it noowwwww. But I can wait if there are going to be big savings =)

 

[Uno mas]

First.... ROFLMAO

On to business....I've put my R91 together but haven't tried coiling and wicking it yet. I guess I'm chicken that I won't get it right But I did get some hemp fiber (vapemail!!) today, so I think I'm going to try a vertical micro coil once I boil my hemp I've heard great things! (I just hope this doesn't mean I will want another 3 or 4 R91s, that could get expensive )

That's basically what I have in mind also, I'm still waitin' on the hemp but have seen some great builds being posted. Have also seen at least one melted insulator

Thinkin' about buildin' a quad coil in one of my RDAs for the fun of it

 

[Cheryl75]

I hear there's a website out on the netz where you can find a Sugar Daddy now....

Yes, thats what i need!!!! A sugar daddy!!!!

 

[mcol]

Ive got the urge to buy 10 30ml bottles of juice, they are all sitting in my cart. Any idea what if anything will be offered on black friday? I want it allllll i wannnttt it alll i wannnt it alllll and I want it noowwwww. But I can wait if there are going to be big savings =)

No clue.,,,,,,,,,,,,,,,