No, i was telling Uno to google twerking, he wasnt sure what it was!
mtbakervapor
- Thread starter xNaTe21x
- Start date
- th_trl_thread_readers 0
- Status
No, i was telling Uno to google twerking, he wasnt sure what it was!
What about selfie twerkin' now that'd be really happenin'maybe?
THAT will be the thing for 2014!!!!!! Brilliant!!!
Don't give them more ideas!!!!What about selfie twerkin' now that'd be really happenin'
Awwww, and you chose this one to be your first!so true.....one thread at a time
(Which one is next?
)
IMHO if you have become accustomed to the kanger style BCC's then I doubt you will like the I clears. I picked up a 134 that came with the older I clear 30 and I hate it. The new ones with the sealed centre tube with the holes in it is supposed to be better but like Sean said they are juice hogs. I don't find them good at all, weak flavour and light vape. Especially since the BSD coil came around.Well, again that's not really that big of a concern for me, I use mostly Protanks and Evods anyway, have yet to try those iClears though. How are they? Oh, I also like the T3's, I don't really like the bigger tanks as I switch juices a lot, I only have one regular Protank the one that holds the 3ml and it is strictly used for my hazelnut, the others are Mini-Protanks and Evods, I do want to get a few of the Aro ones to check them out, but I still prefer small tanks.
I got my Evod's where I have the juice somewhat match the juice type, Red for Fruits, Green for Menthol, Silver for Tobacco types and what they call Yellow which isn't yellow for Nut type flavors.
What a day. I want to catch up, but I'm flat out too tired. Y'all have been chatty since I snuck into the thread between meetings!
Just finished cleaning my experimental set of LR ego-c (A) atty's in the eroll and ecab.
Conclusion: Everyone who says LR's in erolls and ecabs are a bad idea are right. I therefore disagree with folks who like them in those devices. (I knew that going in to this experiment, but hey, I love to tinker and play...)
LR's shorten my battery life considerably, burn <i>way</i> too hot for in this equipment, and, with the gunky juices I like to vape? Are hell to clean. Particularly if you happen to put peanut butter cup in a tank...
Going back to my SR's once this set burns out.
Maybe sooner, considering that might be a month or more, now that I've figured out how I was snapping coils.
Second conclusion? If I really want to only clean my attys once a week, but am refusing to give up things like cinna-omnom roll and caramel based juices? I really just need to flip out my attys every three days. Otherwise, the amount of gunk in them makes removing the wicks in one piece next to impossible, no matter how long I soak 'em first. Takes almost the same amount of time to clean six attys as three. And while I can rewick easily with cotton, I'd really like to figure out how long I can keep the original silica intact. Just 'cause it's now turned into a personal challenge.
On that note, me and my nice clean atty and a tank of caramel coffee are going to try to catch up on a few threads and then get back to work. (Going be a crazy few days, based on the project I just picked up and the fact that I'm really, really, trying not to have to work through vacation next week.)
Just finished cleaning my experimental set of LR ego-c (A) atty's in the eroll and ecab.
Conclusion: Everyone who says LR's in erolls and ecabs are a bad idea are right. I therefore disagree with folks who like them in those devices. (I knew that going in to this experiment, but hey, I love to tinker and play...)
LR's shorten my battery life considerably, burn <i>way</i> too hot for in this equipment, and, with the gunky juices I like to vape? Are hell to clean. Particularly if you happen to put peanut butter cup in a tank...
Going back to my SR's once this set burns out.
Maybe sooner, considering that might be a month or more, now that I've figured out how I was snapping coils.
Second conclusion? If I really want to only clean my attys once a week, but am refusing to give up things like cinna-omnom roll and caramel based juices? I really just need to flip out my attys every three days. Otherwise, the amount of gunk in them makes removing the wicks in one piece next to impossible, no matter how long I soak 'em first. Takes almost the same amount of time to clean six attys as three. And while I can rewick easily with cotton, I'd really like to figure out how long I can keep the original silica intact. Just 'cause it's now turned into a personal challenge.
On that note, me and my nice clean atty and a tank of caramel coffee are going to try to catch up on a few threads and then get back to work. (Going be a crazy few days, based on the project I just picked up and the fact that I'm really, really, trying not to have to work through vacation next week.)
What about selfie twerkin' now that'd be really happenin'
lmao...you really are determined to get Strats' attention...aren't u!
I agree, I didn't much care for them myself. I think I had the first version, and I had to remove a few strands of each wick because they kept flooding as well.IMHO if you have become accustomed to the kanger style BCC's then I doubt you will like the I clears. I picked up a 134 that came with the older I clear 30 and I hate it. The new ones with the sealed centre tube with the holes in it is supposed to be better but like Sean said they are juice hogs. I don't find them good at all, weak flavour and light vape. Especially since the BSD coil came around.
It's an MBV thread signal for kidding, sarcasm, or a joke
IMHO if you have become accustomed to the kanger style BCC's then I doubt you will like the I clears. I picked up a 134 that came with the older I clear 30 and I hate it. The new ones with the sealed centre tube with the holes in it is supposed to be better but like Sean said they are juice hogs. I don't find them good at all, weak flavour and light vape. Especially since the BSD coil came around.
I do on occasion like a top coil, but don't need a juice hog clearo. I'm just going to stick to the ones I know I like but need to get more Glass Tanks and I like the Mini-Protanks, but also want to try the ARO's out even though they hold more juice then I typically like so I will use those for my Hazelnut, Red Apple and other tank cracker types.
lmao...you really are determined to get Strats' attention...aren't u!
Oh god, PUD Twerking!
Sort of like how you never see Ralph Nader & Zakk Wylde in the same place at the same time.
Same person
Don't give them more ideas!!!!
Awwww, and you chose this one to be your first!
(Which one is next?
that remains to be seen. but we are patient. (who am i kidding....redheads are anything but patient
)
Well, it was a suggestion of another member that when post are being made that sometimes they may be taken out of the context in which they were meant due to the fact that you cannot see any inflection of person expression to determine if they are just kidding or if they are serious so the word "Dolphin" is one they use to let others know they were actually kidding and to not take it personally as an affront. I have no idea of who came up with using that particular word for this nor how they determined that "Dolphin" should be used, other then logically thinking that a Dolphins audibles can sound like laughing. At least that is logical to me, but the real reason I haven't got a clue!
Sort of like how you never see Ralph Nader & Zakk Wylde in the same place at the same time.
Same person
I knew it!
I think it was Mowgli...they use it on another board he frequents?
There was a misunderstanding here and he suggested it.
It was a very good idea!
Yeah, I remember it came up due to a slight misunderstanding but couldn't remember who actually suggested it.
Oh and back to the Twerking, I wonder if there would be an Elmer PUD Twerking cartoon somewhere!
Sort of like how you never see Ralph Nader & Zakk Wylde in the same place at the same time.
Same person
ummm....how come i don't have a provari then?
- Status
Similar threads
