Fixed mine with the tip of a ball point pen without even getting up from my desk. Left a tiny dimple, but no one will ever know. Fixed in literally 5 seconds. Sweet.
- Status
That is why in the second or third post of this thread I recommended that people use something non marring like a chop stick (not that any one will ever notice it). Now I said it again so if people are skipping around they will see it here
Glad it keeps working out for you and every one else (if your button indeed sticks out
).
I also remember seeing a fix for the wobble towards the end of a video review by a gentleman here on ECF who is on my list of youtute reviewers
RHP
RHP
I just picked up an MVP 2 from work to try out and I only had two complaints. One was the wobble, but turns out that was only a one minute fix. Thanks for the advice! I also thought it would work similar to the iTaste vv v3 and be able to switch from volts to watts. Not a fan of having to cycle through just to decrease my volts/watts, but with it's form factor, battery, and solid build and performance, I can ignore it.
I mentioned having written innokin on this subject. Received the standard corporate blow off response.
Dear Sir or Madam,
I am a happy owner of a MVP V1 and enjoy the device very much. One of my very few complaints is the way the toggle power on/off button on the bottom of the device sticks out. This cause the device to "wobble" and often fall over, particularly with a heavy clearomiser. I have seen this complaint in almost every review of the device I have read. I have also read that the MVP V2 has the same annoying wobble.
I came up with a very simple and easy fix for this problem. I simply use a wooden probe to push down on the base of the toggle button. Then flip the switch and push down on the other side. Some times it only takes one time and other times you may have to flip it back and forth a couple of time pushing down on the base. This allows the button to sit flush and the device becomes much more stable.
I would think that this is something that would be easy to fix before it leaves the factory. Although I love my device it would be nice if it didn't have to be worked on right out of the box to function properly. Hopefully you will pass this on to the appropriate folks in production so that they might be able to make a great product even better.
Hello ,
Thank you for your feedback and suggestion.
We've noted this problem, and have improved it. Thank you very much
What are the odds they actually fix this.
I just can't believe they keep kicking them out the door with this stupid problem.
At least we have an easy fix now
Dear Sir or Madam,
I am a happy owner of a MVP V1 and enjoy the device very much. One of my very few complaints is the way the toggle power on/off button on the bottom of the device sticks out. This cause the device to "wobble" and often fall over, particularly with a heavy clearomiser. I have seen this complaint in almost every review of the device I have read. I have also read that the MVP V2 has the same annoying wobble.
I came up with a very simple and easy fix for this problem. I simply use a wooden probe to push down on the base of the toggle button. Then flip the switch and push down on the other side. Some times it only takes one time and other times you may have to flip it back and forth a couple of time pushing down on the base. This allows the button to sit flush and the device becomes much more stable.
I would think that this is something that would be easy to fix before it leaves the factory. Although I love my device it would be nice if it didn't have to be worked on right out of the box to function properly. Hopefully you will pass this on to the appropriate folks in production so that they might be able to make a great product even better.
Hello ,
Thank you for your feedback and suggestion.
We've noted this problem, and have improved it. Thank you very much
What are the odds they actually fix this.
I just can't believe they keep kicking them out the door with this stupid problem.
At least we have an easy fix now
Worked like a charm for me! Got my MVP today and I have no complaints about it now! Thanks for the simple fix!
Sent from my iPhone using Tapatalk - now Free
Sent from my iPhone using Tapatalk - now Free
Received my MVP V2 yesterday. Same button wobble same fix. Why Innokin? Why? Just unbelievable to me.
Glad every one seems to be having good luck with the fix. Yet to hear of some one who it didn't work for.
I do have to comment that I had the bottom button start to sneak back out on me again on my V1. I just
gave it a little push and it settled back down.
Happy vaping
Glad every one seems to be having good luck with the fix. Yet to hear of some one who it didn't work for.
I do have to comment that I had the bottom button start to sneak back out on me again on my V1. I just
gave it a little push and it settled back down.
Happy vaping
Cool tip thanks. Can anyone show me how to do it in a video? It's seems like something i'd mess up and break my device 
Last edited:
This is no longer an issue on the newest v2's. My friend and I both got ours the same day from 101vape and neither of them have the wobble issue, the button is flush. I have also read several recent threads with people saying their new MVP2 doesn't have this issue either. Just thought it'd be something to mention in this thread.
Sent from my DROID4 using Tapatalk
Sent from my DROID4 using Tapatalk
Cool tip thanks. Can anyone show me how to do it in a video? It's seems like something i'd mess up and break my device
It is real easy. Take a chop stick and push a little on one side then flip the switch and push a little on the other side. Do this a couple of time until it is flush. Check it by running a credit card or such across it on edge.
It seems that all the newest ones coming from state side vendors have the issue fixed now, way to go Innokin. However, I'm sure there is still a lot of old new stock sitting on shelves in vape stores every where.
Damn! That was easy as can be!! It took me all of ten seconds!! Thank you, thank you, thank you!
aushizz just gave me a link to this thread. Thank you capt.shay and thank you aushizz. just what I was looking for for no more wobble.
- Status
