mvp v2 timing out before 10 seconds

Status
Not open for further replies.

Iquitcigs

Senior Member
ECF Veteran
Oct 27, 2013
256
90
Kent uk
i have an mpvv2 and am very pleased with it.I have been building my own coils for my kamary x9 tanks mini pro tank 2s and evods using 0.3mm a1 kanthal 11 wraps 10wrap 8 wraps round a 2mm drill bit they are coming out at between 1.3omh to 1.8omh and produce good vapour and th. My problem is the mpv v2 times out when i take a long pull on it. I am thinking this must be some sort of protection on the device or something as the batt is fully charged it just stops putting power to the atomiser and the button light flashes green indicating that it has stopped powering it.Any thoughts on this or if someone knows why could you lets me know i thought that maybe i am trying to get to much power from the battery.
 

spaceballsrules

Ultra Member
ECF Veteran
Verified Member
Dec 6, 2011
2,858
3,261
North Carolina, USA
Most devices have a safety cutoff that shuts power down if a certain time limit is reached. My Vision Spinner and Kanger EVOD VV batteries cutoff at 8 seconds, and my eGO Twist cuts off at 10 seconds. The MVP does indeed have a 10 second cutoff. It's just extra safety built in just in case the device is activated in your pocket or purse by accident. It prevents it from overheating and suffering catastrophic failure. If you want to bypass this, just let go of the button for a split second and reengage it quickly while taking a hit.
 

spaceballsrules

Ultra Member
ECF Veteran
Verified Member
Dec 6, 2011
2,858
3,261
North Carolina, USA
its timing out before 10 seconds about 6 seconds and as said it takes a couple to get the coil warm and get a pull from it as the title said BEFORE 10 SECONDS!

Your coil might be running too hot or the cutoff circuit in your MVP is faulty and is shutting down the power too early.
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread