My New Provari/Help?

Status
Not open for further replies.

alexrangel

Full Member
Verified Member
Sep 13, 2011
60
22
Pasadena TX
Ok so I have some rookie questions.....
Just got a Provari, I've only used 3.7 & 6v on my SB, Icon, Ego and other similar mods. I've also only used LR cartos or Dual coil cartos.
So my question is what carto should I use if I want to fluctuate between let's say 4-5 volts? I still enjoy a 3.7 low resistance vape but if I go regular R do I loose the fullness of the LR carto?
And batteries...... Oh.... batteries.... I got my Provari with an 18650 extension but what voltage can I use the 18650 on?

Any advise would be awesome....
Thanks,
Alex
 

Goldenkobold

Ultra Member
ECF Veteran
Oct 23, 2010
1,458
175
Florida
The 18650 can use the full range of the device (though the amp limit may stop you from going all the way up if your using a LR atty)

Wattage become more of an issue than volts, if your using a 1.5 atty/cart at 3.7v (your Icon or SB) your getting 9.1 watts
If you used a 2.5 ohm cartomizer and set the provari at 4.8v you would be getting 9.2 watts (pretty much the same vaping experience) if you go higher than 4.8v you will be getting more Heat than your SB or Icon put out.
 

hmm

Senior Member
ECF Veteran
Verified Member
Aug 14, 2011
148
24
NYC
Agreed. LR dont go higher than 4. Reg Resistance or up you can go up all the options. I like a good 3.0 atty at 5.3, personally. The battery will always output the number you indicate the device, until the battery run out of power.
I love 2.5 ohms dual cartos at between 4.8 to 5 depending on what juice I have in.
 

pnc81498

Vaping Master
ECF Veteran
Verified Member
Sep 20, 2011
4,630
14,798
53
Central NJ
I love 2.5 ohms dual cartos at between 4.8 to 5 depending on what juice I have in.


This is what I'm vaping as i type....2.5 @ 4.8 Provape 2500 batt pulled of the charger 8am still going strong.. Only advice i have is explore until you enjoy it, I constantly play with voltage throughout the day, But i keep going back to this combo lately.
 
Status
Not open for further replies.

Users who are viewing this thread