My new t3 and how i love it

[Harplayr]

I just got one on Friday for my 510 batteries.
I agree with Jingles and Mudhill, this is one quality clearo. The fit and finish is excellent and it is a no-fuss item.
While I've only tired my normal 70/30 pg/vg juice in it, so far it whicks great with no dry or burnt hits. I havent cleaned yet, but I can see that it will be easy to clean. You can get at all the parts easily.

It will sit alongside my CE3's as my go-to devices. It vapes a touch cooler than my CE3's, but still provides good flavor and huge volumes of vapor. My only knock on it is that it is a lot bigger than a CE3 so it's not as easily pocketable. That is why I'll still be using the CE3 for my 78's and when I need pocketability.

When SI does get theirs in stock I'm sure they will fly off the shelf.

 

[nightfell]

Double post

 

[nightfell]

So just so I'm understanding this any 510 will work on this?

 

[Trainguy059]

As long as you've got a 510 to eGo adapter. The T3 currently on the market is eGo threaded. If you'll be using your X2 Volts (manuals only) then you'll need a 901/808 to eGo adapter. Autos won't work with the adapters due to too much air loss within the adapter.

So just so I'm understanding this any 510 will work on this?

 

[WorksForMe]

Over the past several months, I’ve used cartos and several different kinds of clearos. No matter what I was using at the time, I was always searching for something better. Now I think my search is over. I’ve had my T3 for about four weeks now, and didn’t have to replace the coil assembly until a couple days ago. The coil seemed to work fine, but it was turning my juice dark really fast. I guess the wicks degrade over time. I’m going try not dry burning this one.
I really love this thing. The tank seems like it will last a long time, and if all the coils will last about a month, it’s hard to beat the price. The taste is clean and true. It holds a lot of juice, and it’s easy to fill. It puts out a lot of vapor and is very consistent. I don’t know what else I could ask for.

J.R.

 

[nightfell]

Worksforme what ohm heads have you been using?

 

[WorksForMe]

Worksforme what ohm heads have you been using?

I've been using the 2.4 ohm coils. That was the only thing I saw available when I got mine, but they work good so I'll probably stick with them.

J.R.

 

[trichman]

I have been using them for weeks as well and love them. I have been rinsing the wicks and unless it was a really dark juice, they tend to clean up pretty good. I'm using them on twists but am looking forward to the SI version.

 

[hcour]

Not sure if ya'll are aware of this or if it matters to anyone, but in one of the other T3 threads someone wrote that "silica wicks don't burn from dry burning."

So if you are into cleaning them that might be nice to know.

http://www.e-cigarette-forum.com/fo...yone-try-new-kanger-t3-yet-9.html#post7693866

 

[WorksForMe]

Something about my first T3 coil assembly caused my juice to turn dark more and more as it got older. This didn’t seem to happen the first week or so. The last day I used it, I emptied the tank and refilled it with my very clear juice. By the time I vaped it down to about the 0.8ml mark, the juice had turned really dark and was almost unusable. I don’t know if this was caused by the wicks, or if the coil was gunked up. For some reason I just threw it away without taking it apart to try to see what the problem was.

J.R.

 

[trichman]

I had a dark juice that did that pretty quick too. I changed the coil and it did it again. I rinsed them off and will use them again for that juice only.

My lighter clearer juices don't darken like that. I had a clear juice that barely darkened the wicks after 2 weeks use. With that one I was able to rinse the coil head assembly and reuse it. It worked like new after I cleaned it. That coil has now been in service for 4 weeks.

 

[WorksForMe]

If your clear juices don't darken at all, maybe it has something to do with my juice. What do you use?

I use 18mg Titan American Red Tobacco flavor from Totally Wicked. IDK what the PG/VG ratio is.

J.R.

 

[trichman]

If your clear juices don't darken at all, maybe it has something to do with my juice. What do you use?

I use 18mg Titan American Red Tobacco flavor from Totally Wicked. IDK what the PG/VG ratio is.

J.R.

The juice I was referring to is Blue Honey by Vape Dudes & it is 50/50, 11mg.

 

[Faylool]

I got some Kanger T3. I usually use tank and cartomizers with 2 drilled holes low reserve vaping. They aren't as good as that but close. The main difference is I tend to vape a lot in a row long draws and repeat. The kanger doesn't keep up as well and the vape is cooler. Can't tell about the taste. Seems good to me. I've had it a week. I don't know what I'm doing! I thought I was getting something a got before. Maybe the T2 so I could use my drip tips with it. But this one is built better. My T2 Kanger rings ( I think it was T2 ) came loose at the top, came off and would it stay back on.

 

[hcour]

In the thread I referenced earlier several folks have talked about reversing the little rubber cup that sits above the wick, so that it sits higher off the wick. They were getting some burnt hits and this has solved that and they are getting even better vapor. Anyone tried this?

I'll finally get to try out my T3's this wknd when my new Provari gets here Sat. Cain't hardly wait!

 

[Harplayr]

In the thread I referenced earlier several folks have talked about reversing the little rubber cup that sits above the wick, so that it sits higher off the wick. They were getting some burnt hits and this has solved that and they are getting even better vapor. Anyone tried this?

I'll finally get to try out my T3's this wknd when my new Provari gets here Sat. Cain't hardly wait!

I haven't had any wicking problems (70/30 juice) so I haven't tried it. I have taken mine apart for cleaning and can see that it would be very easy to do if it is neened.

 

[trichman]

I haven't had any wicking problems (70/30 juice) so I haven't tried it. I have taken mine apart for cleaning and can see that it would be very easy to do if it is neened.

I agree, no wicking problems and all my nicquids are 50/50. I raised the silicone cap on most of mine just in case but didn't turn it inside out because I haven't gotten any dry hits and I have used 3 T3's and 2 replacement heads since I started 4 weeks ago.

 

[mudhill]

i use 80% VG and no wicking problems so far.

 

[heatherina]

I was planning to get another X2 650 auto but since they don't work with this setup, I'll have to get another manual

I am also an auto lover and just got my T3 and ordered one auto ego so I could try it until SI gets them. I also got an 808 to ego adapter from goodprophets. Well, I thought I'd give it a try on my auto X2 with the adapter and it works like a charm! Also works on my auto 78s. A shame I wasted money on an auto ego when I could have had a new X2.

 

[mudhill]

I am also an auto lover and just got my T3 and ordered one auto ego so I could try it until SI gets them. I also got an 808 to ego adapter from goodprophets. Well, I thought I'd give it a try on my auto X2 with the adapter and it works like a charm! Also works on my auto 78s. A shame I wasted money on an auto ego when I could have had a new X2.

man you must have one hell of a set of lungs ,if you are using aT3 on a X2 auto with a adapter,,,i have tryed and my auto X2s don't fire with adapter.

i am really bewildered